دانلود برچسب: استاندارد American Welding Society

خرید پکیج کامل استاندارد ANSI AWS A4.5A4.5M

برای دانلود پکیج کامل استانداردهای AWS و دریافت PDF کلیه شماره های استاندارد AWS بر روی کلید خرید در انتهای صفحه کلیک کنید. پس از اتصال به درگاه پرداخت و تکمیل مراحل خرید، لینکهای دانلود ایمیل می شود. استاندارد انجمن جوشکاری آمریکا تا مارچ سال 2020 بروزرسانی شده است.کلیه فایلها در فرمت PDF ارسال می شود. توجه شود که این پکیج شامل کلیه فایلهای اعلام شده در پایین است.در صورتی که پس از خرید، و هر زمان متوجه شدید فایل استانداردی ناقص است می توانید ان را به صورت رایگان از ما بخواهید. فایلهای aws از ابتدا یعنی سال 1980 تا مارچ سال 2020 می باشد..

در صورتی که نیاز به دانلود هر استانداردی از IHS و یا techstreet دارید، فقط کافیست ادرس اینترنتی استاندارد را از سایت http://techstreet.com  و یا https://global.ihs.com برای ما ارسال کنید (راههای ارتباطی در صفحه تماس با گیگاپیپر ). پس از بررسی، هزینه ان اعلام می شود. پس از واریز نسخه الکترونیکی ارسال می شود.

معرفی استاندارد aws

AWS A4.5M/A4.5:2012
Standard Methods for Classification Testing of Positional Capacity and Root Penetration of Welding Consumables in a Fillet Weld (ISO 15792-3:2011 MOD)
STANDARD by American Welding Society, 03/09/2012

 

For Download Please Contact Us :

Price : 55$

لیست پکیج کامل استانداردهای AWS

با کلیک بر روی خرید، در انتهای این صفحه مجموعه کامل استانداردهای جوش ، مطابق تاریخ اعلامی برایتان ایمیل می شود.

استانداردهای ANSI AWS A4.5A4.5M

Edition:1stPublished:03/09/2012ISBN(s):9780871718013ANSI ApprovedNumber of Pages:26

انداردهای انجمن جوشکاری آمریکا سال 2019 از پکیج

 

This standard describes preparation and assessment of a fillet weld test piece.

Test conditions prescribed and results required should not be considered to be requirements or expectations for a procedure qualification.

This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other.

 

خرید پکیج کامل استاندارد AWS از ابتدا تا سال 2020

برای دانلود پکیج کامل استانداردهای AWS و دریافت PDF کلیه شماره های استاندارد AWS بر روی کلید خرید در انتهای صفحه کلیک کنید. پس از اتصال به درگاه پرداخت و تکمیل مراحل خرید، لینکهای دانلود ایمیل می شود. استاندارد انجمن جوشکاری آمریکا تا مارچ سال 2020 بروزرسانی شده است.کلیه فایلها در فرمت PDF ارسال می شود. توجه شود که این پکیج شامل کلیه فایلهای اعلام شده در پایین است.در صورتی که پس از خرید، و هر زمان متوجه شدید فایل استانداردی ناقص است می توانید ان را به صورت رایگان از ما بخواهید. فایلهای aws از ابتدا یعنی سال 1980 تا مارچ سال 2020 می باشد..

در صورتی که نیاز به دانلود هر استانداردی از IHS و یا techstreet دارید، فقط کافیست ادرس اینترنتی استاندارد را از سایت http://techstreet.com  و یا https://global.ihs.com برای ما ارسال کنید (راههای ارتباطی در صفحه تماس با گیگاپیپر ). پس از بررسی، هزینه ان اعلام می شود. پس از واریز نسخه الکترونیکی ارسال می شود.

معرفی استاندارد aws

AMERICAN WELDING SOCIETY

As a leader in welding education and technology development, AWS promotes best practices and works to advance the science and application of welding and allied processes such as joining, brazing, soldering, cutting, and thermal spray.

 

For Download Please Contact Us :

Price : 55$

لیست پکیج کامل استانداردهای AWS

با کلیک بر روی خرید، در انتهای این صفحه مجموعه کامل استانداردهای جوش ، مطابق تاریخ اعلامی برایتان ایمیل می شود.

استانداردهای AWS سال 2020 پکیج

AWS J1.3-J1.3M
2020
SPECIFICATION FOR MATERIALS USED IN RESISTANCE WELDING ELECTRODES AND TOOLING – FIRST EDITION

AWS A3.0M-A3.0
2020
STANDARD WELDING TERMS AND DEFINITIONS INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING – 13TH EDITION

استانداردهای انجمن جوشکاری آمریکا سال 2019 از پکیج

AWS C3.2M-C3.2
2019
STANDARD METHOD FOR EVALUATING THE STRENGTH OF BRAZED JOINTS – FIFTH EDITION

AWS B2.1-1-205
2019
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, E6010 (VERTICAL UPHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), IN THE AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE APPLICATIONS – 3RD EDITION

AWS B2.1-1-204
2019
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 3/4 INCH [19 MM] THICK, E6010 (VERTICAL DOWNHILL ROOT WITH THE BALANCE VERTICAL UPHILL), IN THE AS-WELDED CONDITION, PRIMARILY PIPE APPLICATIONS – 3RD EDITION

AWS B2.1-1-206
2019
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, E6010 (VERTICAL DOWNHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), IN THE AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE APPLICATIONS – 3RD EDITION

AWS B2.1-1-202
2019
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 3/4 INCH [19 MM] THICK, E6010 (VERTICAL DOWNHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), IN THE AS-WELDED CONDITION, PRIMARILY PIPE APPLICATIONS – 3RD EDITION

AWS B2.1-1-203
2019
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 3/4 INCH [19 MM] THICK, E6010 (VERTICAL UPHILL), IN THE AS-WELDED CONDITION, PRIMARILY PIPE APPLICATIONS – 3RD EDITION

AWS B2.1-1-201
2019
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 3/4 INCH [19 MM] THICK, E6010 (VERTICAL UPHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), IN THE AS-WELDED CONDITION, PRIMARILY PIPE APPLICATIONS – 3RD EDITION

AWS B2.1-1-207
2019
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, ER70S-2, IN THE AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE APPLICATIONS – 3RD EDITION

AWS B2.1-1-208
2019
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, E7018, IN THE AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE APPLICATIONS – 3RD EDITION

AWS B2.1-1-209
2019
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, ER70S-2 AND E7018, IN THE AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE APPLICATIONS – 3RD EDITION

AWS A5.8M-A5.8
2019
SPECIFICATION FOR FILLER METALS FOR BRAZING AND BRAZE WELDING – 11TH EDITION

AWS D20.1-D20.1M
2019
SPECIFICATION FOR FABRICATION OF METAL COMPONENTS USING ADDITIVE MANUFACTURING

AWS D14.3-D14.3M
2019
SPECIFICATION FOR WELDING EARTHMOVING, CONSTRUCTION AND AGRICULTURAL, AND GROUND-BASED MATERIAL HANDLING EQUIPMENT

AWS D15.1-D15.1M
2019
RAILROAD WELDING SPECIFICATION FOR CARS AND LOCOMOTIVES

AWS D3.9-D3.9M
2019
SPECIFICATION FOR CLASSIFICATION OF WELD-THROUGH PAINT PRIMERS

AWS C1.5
2019
SPECIFICATION FOR THE QUALIFICATION OF RESISTANCE WELDING TECHNICIANS

AWS A5.01M-A5.01
2019
WELDING AND BRAZING CONSUMABLES – PROCUREMENT OF FILLER METALS AND FLUXES (ISO 14344:2010 MOD)

AWS D1.5M-D1.5
2019
BRIDGE WELDING CODE – 7TH EDITION; INTERIM REVISION

AWS D17.2-D17.2M
2019
SPECIFICATION FOR RESISTANCE WELDING FOR AEROSPACE APPLICATIONS – 3RD EDITION

مجموعه فایلهای انجمن جوش آمریکا (AWS) سال 2018 پکیج

AWS D16.6M-D16.6
2018
SPECIFICATION FOR ROBOT ARC WELDING TRAINING AND TESTING CELL – 1ST EDITION

AWS B2.1-1-315
2018
STANDARD WELDING PROCEDURE SPECIFICATION FOR NAVAL APPLICATIONS (SWPS-N) FOR GAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERT ROOT FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (S-1), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, MIL-MS-1 MIL-70S-2, AND MIL-7018-M IN THE AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE FOR NAVAL APPLICATIONS – 1ST EDITION

AWS B2.1-1-314
2018
STANDARD WELDING PROCEDURE SPECIFICATION FOR NAVAL APPLICATIONS (SWPS-N) FOR GAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERT ROOT OF CARBON STEEL (S-1), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, MIL-MS-1 AND MIL-70S-2, IN THE AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE FOR NAVAL APPLICATIONS – 1ST EDITION

AWS B2.1-1-027
2018
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SELF-SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL (M-1 OR P-1, GROUPS 1 AND 2), 1/8 INCH [3 MM] THROUGH 1/2 INCH [13 MM] THICK, E71T-11, IN THE AS-WELDED CONDITION, PRIMARILY PLATE AND STRUCTURAL APPLICATIONS – 4TH EDITION

AWS A5.11-A5.11M
2018
SPECIFICATION FOR NICKEL AND NICKEL-ALLOY WELDING ELECTRODES FOR SHIELDED METAL ARC WELDING – 11TH EDITION

AWS B2.1-8-322
2018
STANDARD WELDING PROCEDURE SPECIFICATION FOR NAVAL APPLICATIONS (SWPS-N) FOR GAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERT ROOT FOLLOWED BY SHIELDED METAL ARC WELDING OF AUSTENITIC STAINLESS STEEL (S-8), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, MIL-3XX AND MIL-3XX-XX, IN THE AS-WELDED CONDITION, PRIMARILY PIPE FOR NAVAL APPLICATIONS – 1ST EDITION

AWS B2.1-8-321
2018
STANDARD WELDING PROCEDURE SPECIFICATION FOR NAVAL APPLICATIONS (SWPS-N) FOR GAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERT ROOT OF AUSTENITIC STAINLESS STEEL (S-8), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, MIL-3XX, IN THE AS-WELDED CONDITION, PRIMARILY PIPE FOR NAVAL APPLICATIONS – 1ST EDITION

AWS B2.1-1-017
2018
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2) 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, E6010, IN THE AS-WELDED OR PWHT CONDITION, PRIMARILY PLATE AND STRUCTURAL APPLICATIONS – 2ND EDITION

لیست مابقی استانداردهای موجود در پکیج AWS

D17.2/D17.2M
Specification for Resistance Welding for Aerospace Applications – 3rd Edition
2019
AWS
D1.5M/D1.5
Bridge Welding Code – 7th Edition; Interim Revision
2019
AWS
B2.3/B2.3M
Specification for Soldering Procedure and Performance Qualification – 3rd Edition
2018
AWS
B2.1-1-017
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or
2018
AWS

2) 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, E6010, in the As-Welded or PWHT Condition, Primarily Plate and

Structural Applications

D1.4/D1.4M
Structural Welding Code – Steel Reinforcing Bars – 8th Edition
2018
AWS
B2.1-1-019
Standard Welding Procedure Specification (SWPS) for CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1,
2018
AWS

Group 1 or 2), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, E70T-1C and E71 T-1C, in the As-Welded Condition,

Primarily Plate and Struct

NAVSEA B2.1-
Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Carbon Dioxide Shielded Flux Cored Arc
2018
AWS
1-304
Welding of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-70T-1 and MIL-71T-1, in the As-

Welded Condition, Prima

D16.1M/D16.1
Specification for Robotic Arc Welding Safety – 2nd Edition
2018
AWS
B2.1-1-020
Standard Welding Procedure Specification (SWPS) for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding of Carbon
2018
AWS

Steel (M-1/P-1, Group 1 or 2), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, E70T-1M and E71T-1M, in the As-

Welded or PWHT Condition, Primaril

B2.1-1-026
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or
2018
AWS

2) 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, E6010 (Vertical Downhill) Followed by E7018, in the As-Welded or

PWHT Condition, Prima

F3.2
Ventilation Guide for Weld Fume – 2nd Edition
2018
AWS
NAVSEA B2.1-
Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of Carbon
2018
AWS
1-301
Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-70S-2, in the As-Welded or PWHT Condition,

Primarily Plate and Structural Na

B2.1-8-023
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8
2018
AWS

Group 1) 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, in the As-Welded Condition, Primarily Plate and Structural

دانلود استانداردهای جوش

Applications – 2nd

NAVSEA B2.1-
Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of Carbon
2018
AWS
1-311
Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-70S-2, in the As-Welded or PWHT Condition,

Primarily Pipe for Naval Applicat

D1.5M/D1.5
Bridge Welding Code – 7th Edition; Interim Revision
2018
AWS
D16.6M/D16.6
Specification for Robot Arc Welding Training and Testing Cell – 1st Edition
2018
AWS
A5.2/A5.2M
Specification for Carbon and Low-Alloy Steel Rods for Oxyfuel Gas Welding – 9th Edition
2018
AWS
B2.1-1-016
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or
2018
AWS

2) 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, E7018, in the As-Welded or PWHT Condition, Primarily Plate and

Structural Applications

A5.11/A5.11M
Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding
2018
AWS
A5.14/A5.14M
Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods
2018
AWS
B2.1-1-027
Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-
2018
AWS

1, Group 1 or 2), 1/8 Through 1/2 Inch Thick, E71T-11, As-Welded Condition Site License

B2.1-1-304

2018
AWS
B2.1-1-304

2018
AWS

B5.2
Specification for the Qualification of Welding Inspector Specialists and Welding Inspector Assistants
2018
AWS
C4.3/C4.3M
Recommended Practices for Safe Oxyfuel Gas Heating Torch Operation – Third Edition
2018
AWS
D1.3/D1.3M
NULL
2018
AWS
D9.1M/D9.1
Sheet Metal Welding Code
2018
AWS
D10.18M/D10.
Guide forWelding Ferritic/Austenitic Duplex Stainless Steel Piping and
2018
AWS
18
Tubing

F1.1M
Method for Sampling Airborne Particulates Generated by Welding and Allied Processes
2018
AWS
F3.2M/F3.2
Ventilation Guide for Weld Fume
2018
AWS
NAVSEA B2.1-
Standard Welding Procedure Specification for Naval Applications (SWPS-N) for 75% Argon Plus 25% Carbon Dioxide
2018
AWS
1-305
Shielded Flux Cored Arc Welding of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-70T-1

and MIL-71T-1, in the As-Weld

C2.23M/C2.23
Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and
2018
AWS

Composites for the Corrosion Protection of Steel – 2nd Edition

B2.1-1-021
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc
2018
AWS

Welding of Carbon Steel (M-1/P-1, Group 1 or 2) 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, ER70S-2 and E7018,

in the As-Welded or PWHT Condi

B2.1-1-316
Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Argon Plus 2% Oxygen Shielded Gas
2018
AWS

Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick,

MIL-70S-3, in the As-Welded or

B2.1-1-022
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or
2018
AWS

2) 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, E6010 (Vertical Uphill) Followed by E7018, in the As-Welded or

PWHT Condition, Primari

NAVSEA B2.1-
Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Shielded Metal Arc Welding of
2018
AWS
8-309
Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX-XX, in the As-Welded

 AWS 2019 استاندارد

Condition, Primarily Plate and Stru

B2.1-1-317
Standard Welding Procedure Specification for Naval Applications (SWPS-N) for 75% Argon Plus 25% Carbon Dioxide
2018
AWS

Shielded Flux Cored Arc Welding of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-70T-1

and MIL-71T-1, in the As-Weld

NAVSEA B2.1-
Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Shielded Metal Arc Welding of
2018
AWS
8-319
Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX-XX, in the As-Welded

Condition, Primarily Pipe for Naval

C3.12M/C3.12

2017
AWS
C4.2/C4.2M
Recommended Practices for Safe Oxyfuel Gas Cutting Torch Operation
2017
AWS
C7.4/C7.4M
Process Specification and Operator Qualification for Laser Beam Welding
2017
AWS
C7.6/C7.6M

2017
AWS
D1.6/D1.6M
Structural Welding Code – Stainless Steel
2017
AWS
D3.6M
Specification for Underwater Welding
2017
AWS
D8.2M

2017
AWS
D8.14M
Specification for Automotive Weld Qualityu Arc Welding of Aluminum
2017
AWS
D14.1/D14.1M
Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment
2017
AWS
AMD 1

D16.3M/D16.3
Risk Assessment Guide for Robotic Arc Welding
2017
AWS
EG2.0
Guide for The Training and Qualification of Welding Personnel Entry Level Welder
2017
AWS
EG2.0
Guide for The Training and Qualification of Welding Personnel Entry Level Welder
2017
AWS
SUPPLEMENT

F1.6
Guide for Estimating Welding Emissions for EPA and Ventilation Permit Reporting
2017
AWS

F4.1
Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping
2017
AWS
A5.9/A5.9M
Specification for Bare Stainless Steel Welding Electrodes and Rods
2017
AWS
A5.10/A5.10M
Specification for Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods
2017
AWS
A5.18/A5.18M
Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
2017
AWS
API-M
Code Clinic for Study of API Standard 1104 Nineteenth Edition Welding of Pipelines and Related Facilities – Reference
2017
AWS

Manual

C1.4M/C1.4
Specification for Resistance Welding of Carbon and Low-Alloy Steels
2017
AWS
C2.16/C2.16M
Guide for Thermal-Spray Operator Qualification
2017
AWS
QC10
Specification for Qualification and Certification for Entry Level Welders
2017
AWS
A1.1
Metric Practice Guide for the Welding Industry
2016
AWS
C2.20/C2.20M
Specificatiopn for Thermal Spraying Zinc Anodes on Steel Reinforced Concrete
2016
AWS
C3.5MC3.5
NULL
2016
AWS
AMD 1

G1.10M
Guide for The Evaluation of Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic Welds
2016
AWS
B2.1-8-308

2016
AWS
B2.1-8-318

2016
AWS
C3.4
Specification for Torch Brazing
2016
AWS
C3.5
Specification for Induction Brazing
2016
AWS
C3.6
Specification for Furnace Brazing
2016
AWS
C7.3
Process Specification for Electron Beam Welding
2016
AWS
D17.3
Specification for Friction Stir Welding of Aluminum Alloys for Aerospace Applications
2016
AWS
QC47

2016
AWS
A5.36A5.36M
NULL
2016
AWS
B1.10MB1.10
NULL
2016
AWS
B2.2-B2.2M
NULL
2016
AWS
B4.0
Standard Methods for Mechanical Testing of Welds
2016
AWS
C3.4MC3.4
NULL
2016
AWS
C3.5MC3.5
NULL
2016
AWS
C3.6MC3.6
NULL
2016
AWS
D1.1D1.1M
NULL
2016
AWS
ERTA 2

D1.8D1.8M
NULL
2016
AWS
D17.3D17.3M
NULL
2016
AWS
J1.2MJ1.2
NULL
2016
AWS
QC1
Standard for AWS Certification of Welding Inspectors
2016
AWS
NAVSEA B2.1-
NULL
2015
AWS
1-302

NAVSEA B2.1-
NULL
2015
AWS
1-312

D16.4MD16.4
NULL
2015
AWS
D18.3D18.3M
NULL
2015
AWS
D1.9D1.9M
NULL
2015
AWS
D1.5MD1.5
NULL
2015
AWS

D1.1 CCRM
CODE CLINIC For Study of AWS D1.1/D1.1M: 2010 Structural Welding CodeuSteel
2015
AWS
BUNDLE A
NULL
2015
AWS
BUNDLE B
NULL
2015
AWS
BUNDLE C
NULL
2015
AWS
C1.5
NULL
2015
AWS
C2.21MC2.21
NULL
2015
AWS
A5.35A5.35M
NULL
2015
AWS
B2.1-18-231
NULL
2015
AWS
B2.1B2.1M
NULL
2015
AWS
AMD1

B2.1B2.1M
NULL
2015
AWS
ERTA 1

B1.11M/B1.11
Guide for the Visual Examination of Welds
2015
AWS
B2.1-1/8-010
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1) to Austenitic
2015
AWS

Stainless Steel (M-8/ P-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing – 3rd Edition

D1.1/D1.1M
Structural Welding Code – Steel – 23rd Edition
2015
AWS
WHB-5.9
Welding Handbook Volume 5 – ALUMINUM AND ALUMINUM ALLOYS, Part 2
2015
AWS
WI
Welding Inspection Handbook – Fourth Edition
2015
AWS
A5.24/A5.24M
Zirconium and Zirconium Alloy Welding Electrodes and Rods
2014
AWS
D8.8M
Specification for Automotive Weld Quality – Arc Welding of Steel
2014
AWS
B2.1B2.1M-
NULL
2014
AWS
BMG

A5.5/A5.5M
Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding – 10th Edition
2014
AWS
B2.1/B2.1M
Specification for Welding Procedure and Performance Qualification – Sixth Edition
2014
AWS
B5.17
Specification for the Qualification of Welding Fabricators – Fourth Edition
2014
AWS
D1.2/D1.2M
Structural Welding Code-Aluminum – 6th Edition
2014
AWS
ERTA

D1.2/D1.2M
Structural Welding Code-Aluminum – 6th Edition
2014
AWS
G2.4/G2.4M
Guide for the Fusion Welding of Titanium and Titanium Alloys
2014
AWS
J1.1M/J1.1
Specification for Resistance Welding Controls
2013
AWS
F1.2
Laboratory Method for Measuring Fume Generation Rates and Total Fume Emission of Welding and Allied Processes – 6th
2013
AWS

Edition

C7.1M/C7.1
Recommended Practices for Electron Beam Welding and Allied Processes
2013
AWS
D14.9/D14.9M
Specification for the Welding of Hydraulic Cylinders – First Edition
2013
AWS
D15.2/D15.2M
Recommended Practices for the Welding of Rails and Related Rail Components for Use by Rail Vehicles – 3rd Edition
2013
AWS
D17.2/D17.2M
Specification for Resistance Welding for Aerospace Applications. – 2nd Edition
2013
AWS
D8.1M
Specification for Automotive Weld Quality-Resistance Spot Welding of Steel – 2nd Edition
2013
AWS
C2.19/C2.19M
Specification for the Application of Thermal Spray Coatings to Machine Elements for OEM and Repair – 1st Edition
2013
AWS
B2.1-8-005
Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of
2013
AWS

Austenitic Stainless Steel (M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing

Site License

B5.1
Specification for the Qualification of Welding Inspectors – 2nd Edition
2013
AWS
A5.34/A5.34M
Specification for Nickel-Alloy Electrodes for Flux Cored ArcWelding – 2nd Edition
2013
AWS
A9.5
Guide for Verification and Validation in Computation Weld Mechanics – 1st Edition
2013
AWS

A5.01M/A5.01
Welding Consumablesa Procurement of Filler Metals and Fluxes – 5th Edition
2013
AWS
A5.16/A5.16M
Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods – 6th Edition
2013
AWS
D17.2/D17.2M
Specification for Resistance Welding for Aerospace Applications
2013
AWS
F1.2
Laboratory Method for Measuring Fume Generation Rates and Total Fume Emission of Welding and Allied Processes
2013
AWS
A5.16/A5.16M
Specification for Titanium and Titanium Alloy Welding Electrodes and Rods
2013
AWS
A9.5
Guide for Verification and Validation in Computation Weld Mechanics
2013
AWS
D14.9/D14.9M
Specification for the Welding of Hydraulic Cylinders
2013
AWS
D15.2/D15.2M
Recommended Practices for the Welding of Rails and Related Rail Components for Use by Rail Vehicles
2013
AWS
B2.1-1 8-006
NULL
2013
AWS
B2.1-1-003
Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding of Galvanized Steel, (M-1), 18 Through 10
2013
AWS

Gauage, in the As-Welded Condition, with or without Backing Site License

B2.1-1-004
Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of
2013
AWS

Carbon Steel, (M-1, Group 1), 18 Through 10 Gauge, in the As-Welded Condition, with or without Back

B2.1-1-007
(Withdrawn)Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Galvanized Steel, 10
2013
AWS

Through 18 Gage, in the As-Welded Condition, with or Without Backing Site License

B2.1-1-008
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1, P-1 or S-1), 18
2013
AWS

Through 10 Gauge, in the As-Welded Condition, with or without Backing Site License

B2.1-1-011
(Withdrawn)Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Galvanized Steel, 10
2013
AWS

Through 18 Gauge, in the As-Welded Condition, with or Without Backing Site License

B2.1-1-012
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1,P-1, or S-1 to
2013
AWS

M-1, P-1 or S-1), 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing Si

B2.1-1 8-014
NULL
2013
AWS
B2.1-1 8-227
NULL
2013
AWS
B2.1-1 8-228
NULL
2013
AWS
B2.1-1 8-229
NULL
2013
AWS
B2.1-1 8-230
NULL
2013
AWS
B2.1-8-009
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8,P-
2013
AWS

8,or S-8), 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site Licens

B2.1-8-013
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel, (SWPS)
2013
AWS

10 Through 18 Gauge, in the As-Welded Condition, with or without Backing Site License

B5.1
Specification for the Qualification of Welding Inspectors
2013
AWS
A5.8M/A5.8
Specification for Filler Metals for Brazing and Braze Welding
2013
AWS
AMD 1

استانداردهاي انجمن جوشکاري آمريکا

A5.9/A5.9M
Specification for Bare Stainless Steel Welding Electrodes and Rods
2012
AWS
A5.10/A5.10M
Specification for Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods
2012
AWS
A2.4
Standard Symbols for Welding, Brazing, and Nondestructive Examination
2012
AWS
A2.4 Spanish
Standard Symbols for Welding, Brazing, and Nondestructive Examination
2012
AWS
A4.5M/A4.5
Standard Methods for Classification Testing of Positional Capacity and Root Penetration ofWelding Consumables in a
2012
AWS

FilletWeld

A5.1/A5.1M
Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
2012
AWS
Z49.1
Safety in Welding, Cutting and Allied Processes
2012
AWS
B2.1/B2.1M-
Base Metal Grouping for Welding Procedure and Performance Qualification
2012
AWS
BMG

A5.31M A5.31
NULL
2012
AWS

A5.4 A5.4M
NULL
2012
AWS
A5.8M A5.8-
NULL
2012
AWS
AMD 1

D3.6M ERTA
NULL
2012
AWS
D9.1M D9.1
NULL
2012
AWS
D14.4 D14.4M
NULL
2012
AWS
D17.1/D17.1M
Specification for Fusion Welding for Aerospace Applications
2012
AWS
D15.1/D15.1M
Railroad Welding Specification for Cars and Locomotives
2012
AWS
D14.4
Specification for Welded Joints in Machinery and Equipment
2012
AWS
D8.9M
Recommended Practices for Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel
2012
AWS

Materials SAE D8.9M-2002

D9.1/D9.1M
Sheet Metal Welding Code
2012
AWS
C4.5M
Uniform Designation System for Oxyfuel Nozzles
2012
AWS
A5.31
Specification for Fluxes for Brazing and Braze Welding
2012
AWS
A5.36/A5.36M
Specification for Carbon and Low- Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and Metal Cored
2012
AWS

Electrodes for Gas Metal Arc Welding

A5.22/A5.22M
Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods
2012
AWS
A5.4
Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding
2012
AWS
B2.1/B2.1M
Specification for Welding Procedure and Performance Qualification
2012
AWS
B2.3/B2.3M
Specification for Soldering Procedure and Performance Qualification
2012
AWS
B2.4
Specification for Welding Procedure and Performance Qualification for Thermoplastics
2012
AWS
C2.25/C2.25M
Specification for Thermal Spray Feedstock Solid and Composite Wire and Ceramic Rods
2012
AWS
C1.1M/C1.1
Recommended Practices for Resistance Welding
2012
AWS
EWH-I
Effects of Welding on Health, IndexuI through XIV
2012
AWS
G2.3M/G2.3
Guide for the Joining of Solid Solution Austenitic Stainless Steels
2012
AWS
G2.5/G2.5M
Guide for the FusionWelding of Zirconium and Zirconium Alloys
2012
AWS
B2.4
Specification for Welding Procedure and Performance Qualification for Thermoplastics – 2nd Edition
2012
AWS
C4.6M
Thermal Cutting Classification of Thermal Cuts Geometric Product Specification and Quality Tolerances – 1st Edition
2012
AWS
D14.6/D14.6M
Specification for Welding of Rotating Elements of Equipment – 4th Edition
2012
AWS
G2.1M/G2.1
Guide for the Joining of Wrought Nickel-Based Alloys
2012
AWS
A5.8M/A5.8
Specification for Filler Metals for Brazing and Braze Welding – 10th Edition
2011
AWS
F2.3M
Specification for Use and Performance of Transparent Welding Curtains and Screens
2011
AWS
QC20
Specification for AWS Certification of Resistance Welding Technicians
2011
AWS
RWPH
Resistance Welding Pocket Handbook
2011
AWS
C3.7M/C3.7
Specification for Aluminum Brazing
2011
AWS
C3.8M/C3.8
Specification for the Ultrasonic Pulse-Echo Examination of Brazed Joints
2011
AWS
B5.5
Specification for the Qualification of Welding Educators
2011
AWS
B2.1-1-027
Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-
2011
AWS

1, Group 1 or 2), 1/8 Through 1/2 Inch Thick, E71T-11, As-Welded Condition Site License

B2.1-22-015
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Aluminum, (M/P/S-22 TO M/P/S-22),
2011
AWS

18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site License

A5.8M/A5.8
Specification for Filler Metals for Brazing and Braze Welding
2011
AWS
A5.23/A5.23M
Specification for Low Alloy Steel Electrodes and Fluxes for Submerged Arc Welding
2011
AWS

A5.21
Specification for Bare Electrodes and Rods for Surfacing
2011
AWS
A5.14/A5.14M
Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods
2011
AWS
A5.32M/A5.32
Welding Consumablesu Gases and Gas Mixtures for Fusion Welding and Allied Processes
2011
AWS
C3.11M/C3.11
Specification for Torch Soldering
2011
AWS
D1.1/D1.1M
Structural Welding Code
2011
AWS
D1.4/D1.4M
Structural Welding Code – Reinforcing Steel Errata
2011
AWS
A5.21 A5.21M
NULL
2011
AWS
C5.3
Recommended Practices for Air Carbon Arc Gouging and Cutting
2011
AWS
B4.0M
Standard Methods for Mechanical Testing of Welds
2010
AWS
F2.2
Lens Shade Selector
2010
AWS
G1.2M G1.2
NULL
2010
AWS
B2.2 B2.2M
NULL
2010
AWS
WHB-4.9
Materials and Applications Part 1
2010
AWS
A3.0M A3.0
NULL
2010
AWS
D17.1 D17.1M
NULL
2010
AWS
D1.5M/D1.5
Bridge Welding Code
2010
AWS
D1.7/D1.7M
Guide for Strengthening and Repairing Existing Structures
2010
AWS
D1.1/D1.1M PORTUGUESE
Structural Welding Code
2010
AWS
D1.1/D1.1M SPANISH
Structural Welding Code
2010
AWS
C7.2M
Recommended Practices for Laser Beam Welding, Cutting, and Allied Processes
2010
AWS
D1.1 CCRM
CODE CLINIC For Study of AWS D1.1/D1.1M: 2010 Structural Welding CodeuSteel
2010
AWS
D10.14M/D10. 14
Guide for Multipass Orbital Machine Pipe Groove Welding
2010
AWS
D3.6M
Underwater Welding Code
2010
AWS
D3.9
Specification for Classification of Weld-Through Paint Primers
2010
AWS
D14.3/D14.3M
Specification for Welding Earthmoving and Construction Equipment
2010
AWS
B2.1-1-011 ERTA
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Galvanized Steel(M-1), 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing Site License
2010
AWS
A5.22
Specification for Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for Gas Tungsten Arc Welding
2010
AWS
A5.29/A5.29M
Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding
2010
AWS
A5.13/A5.13M
Specification for Surfacing Electrodes for Shielded Metal Arc Welding
2010
AWS
B2.2
Standard for Brazing Procedure and Performance Qualification
2010
AWS
UGFM
AWS User’s Guide to Filler Metals
2010
AWS
D1.1/D1.1M
Structural Welding Code
2010
AWS
D17.3
Specification for Friction Stir Welding of Aluminum Alloys for Aerospace Applications
2010
AWS
A5.11/A5.11M
Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding
2010
AWS
B5.15
Specification for the Qualification of Radiographic Interpreters
2010
AWS
A3.0
Standard Welding Terms and Definitions Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal Cutting, and Thermal Spraying
2010
AWS

B2.1/B2.1M- BMG
Base Metal Grouping for Welding Procedure and Performance Qualification
2009
AWS
A5.12/A5.12M
Specification for Tungsten and Tungsten-Alloy Electrodes for Arc Welding and Cutting
2009
AWS
A5.01M/A5.01
Procurement Guidelines for Consumablesu Welding and Allied ProcessesuFlux and Gas Shielded ElectricalWelding Processes
2009
AWS
QC19
Specification for AWS Certification of Robotic Arc Welding Personnel
2009
AWS
D10.10/D.10M
Recommended Practices for Local Heating of Welds in Piping and Tubing
2009
AWS
PRGP
The Practical Reference Guide to Positioning
2009
AWS
QC10
Specification for Qualification and Certification for Entry Level Welders
2009
AWS
QC14
Specification for the Certification of Welding Sales Representatives
2009
AWS
D18.1/D18.1M
Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygienic) Applications
2009
AWS
D18.2
Guide to Weld Discoloration Levels on Inside of Austenitic Stainless Steel Tube
2009
AWS
EG2.0
Guide for The Training and Qualification of Welding Personnel Entry Level Welder
2009
AWS
B5.14
Specification for the Qualification of Welding Sales Representatives
2009
AWS
C3.9M/C3.9
Specification for Resistance Brazing
2009
AWS
C1.4M/C1.4
Specification for Resistance Welding of Carbon and Low-Alloy Steels
2009
AWS
C1.5

2009
AWS
C3.2M/C3.2
Standard Method for Evaluating the Strength of Brazed Joints
2009
AWS
C3.3
Recommended Practices for Design, Manufacture, and Examination of Critical Brazed Components
2009
AWS
A5.6/A5.6M
Specification for Covered Copper and Copper Alloy Arc Welding Electrodes
2009
AWS
API-M
Code Clinic for Study of API Standard 1104 Nineteenth Edition Welding of Pipelines and Related Facilities – Reference Manual
2009
AWS
B1.10M/B1.10
Guide for the Nondestructive Examination of Welds
2009
AWS
D16.3M/D16.3
Risk Assessment Guide for Robotic Arc Welding
2009
AWS
D14.5/D14.5M
Specification for Welding of Presses and Press Components
2009
AWS
D14.8M
Standard Methods for the Avoidance of Cold Cracks
2009
AWS
D8.14M
Specification for Automotive Weld Qualityu Arc Welding of Aluminum
2009
AWS
D10.18M/D10. 18
Guide forWelding Ferritic/Austenitic Duplex Stainless Steel Piping and Tubing
2009
AWS
D10.7M/D10.7
Guide for the Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe
2009
AWS
D1.1-BI
The Official Book of D1.1 Interpretations – a Collection of Responses to Formal Inquiries About the Requirements of AWS D1.1
2009
AWS
C7.4/C7.4M
Process Specification and Operator Qualification for Laser Beam Welding
2009
AWS
C4.2/C4.2M
Recommended Practices for Safe Oxyfuel Gas Cutting Torch Operation
2009
AWS
D1.2/D1.2M
Structural Welding Code Aluminum Fourth Edition
2009
AWS
D1.3
Structural Welding Code – Sheet Steel
2009
AWS
D1.8/D1.8M
Structural Welding Codeu Seismic Supplement
2009
AWS
B2.1-4-217
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), ER80S-B2, 1/8 Through 1/2 in. Thick As-Welded Condition, 1/8 Through 3/4 in. Th
2009
AWS
B2.1-4-218
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 Through 1/2 in. Thick As-Welded Condition, 1/8 Through 1-1/2 in
2009
AWS
B2.1-4-219
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 Through 1/2 in. Thick, As-Welded Con
2009
AWS

خرید استاندارد American Welding Society

B2.1-4-220
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 Through 1/2 in. Thick, As-Welded Conditi
2009
AWS
B2.1-4-221
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 Through 1/2
2009
AWS
B2.1-5A-222
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), ER90S-B3, 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 3/4 in. Thick, PWHT
2009
AWS
B2.1-5A-223
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), ER9018-B3, 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 1-1/2 in. Thick,
2009
AWS
B2.1-5A-224
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8
2009
AWS
B2.1-5A-225
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 3/4 i
2009
AWS
B2.1-5A-226
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 Through 1/2 in. Thick,
2009
AWS
A5.25 A5.25M
NULL
2009
AWS
A5.26 A5.26M
NULL
2009
AWS
B1.10MB1.10 SPANISH
NULL
2009
AWS
A5.12M A5.12
NULL
2009
AWS
D10.10 D10.10 M
NULL
2009
AWS
C6.1
Recommended Practices for Friction Welding R(1998)
2009
AWS
A5.6 A5.6M
NULL
2008
AWS
API-M
Code Clinic for Study of API Standard 1104 Nineteenth Edition Welding of Pipelines and Related Facilities – Reference Manual
2008
AWS
D10.18M D10.18
NULL
2008
AWS
D10.7M D10.7
NULL
2008
AWS
EG2.0
Guide for The Training and Qualification of Welding Personnel Entry Level Welder
2008
AWS
D8.14M
Specification for Automotive Weld Qualityu Arc Welding of Aluminum
2008
AWS
D1.3 D1.3M
NULL
2008
AWS
C3.2M C3.2
NULL
2008
AWS
C3.3
Recommended Practices for Design, Manufacture, and Examination of Critical Brazed Components
2008
AWS
D1.1-BI
The Official Book of D1.1 Interpretations – a Collection of Responses to Formal Inquiries About the Requirements of AWS D1.1 (1976-1998)
2008
AWS
C7.4 C7.4M
NULL
2008
AWS
WIT-E
NULL
2008
AWS
WIT-T
Welding Inspection Technology Fourth Edition
2008
AWS
WIT-W
NULL
2008
AWS
QC10
Specification for Qualification and Certification for Entry Level Welders
2008
AWS
PRGP
The Practical Reference Guide to Positioning
2008
AWS
QC17
Standard for Accreditation of Welding Fabricators for AWS Certified Welding Fabricator Program
2008
AWS
VIW-M
Visual Inspection Workshop Reference Manual
2008
AWS
WIT
Welding Inspection Technology
2008
AWS
C3.6
Specification for Furnace Brazing
2008
AWS

D1.5M/D1.5
Bridge Welding Code AASHTO BWC-4
2008
AWS
B5.17
Specification for the Qualification of Welding Fabricators
2008
AWS
QC15
Specification for the Certification of Radiographic Interpreters
2008
AWS
B5.17
Specification for the Qualification of Welding Fabricators
2008
AWS
D1.1/D1.1M
structural welding code steel
2008
AWS
D1.3
Structural Welding Code – Sheet Steel Errata
2008
AWS
D8.8/D8.8M
Specification for Automotive and Light Truck Components Weld Quality – Arc Welding SAE HS J1196
2007
AWS
QC1
Standard for AWS Certification of Welding Inspectors
2007
AWS
A5.16/A5.16M
Specification for Titanium and Titanium Alloy Welding Electrodes and Rods
2007
AWS
D1.6/D1.6M
Structural Welding Code – Stainless Steel
2007
AWS
B4.0
Standard Methods for Mechanical Testing of Welds
2007
AWS
C3.4
Specification for Torch Brazing
2007
AWS
C3.5
Specification for Induction Brazing
2007
AWS
B2.1-1-201
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill
2007
AWS
B2.1-1-203
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill), As-Welded Condition (Primarily Pi
2007
AWS
B2.1-1-204
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill Root with the Balance Vertical Up
2007
AWS
B2.1-1-205
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphi
2007
AWS
B2.1-1-206
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Up
2007
AWS
B2.1-1-207
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2, As- Welded or PWHT Condition (Primarily Pipe Appl
2007
AWS
B2.1-1-208
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition (Primarily Pipe Appli
2007
AWS
B2.1-1-209
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2 and E7018,
2007
AWS
D17.2/D17.2M
Specification for Resistance Welding for Aerospace Applications
2007
AWS
B2.1-1-202
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphi
2007
AWS
A2.4
Standard Symbols for Welding, Brazing, and Nondestructive Examination
2007
AWS
F1.1
Method for Sampling Airborne Particulates Generated by Welding and Allied Processes
2007
AWS
F4.1
Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping
2007
AWS
D10.11M/D10. 11
Guide for Root Pass Welding of Pipe Without Backing
2007
AWS
A5.2/A5.2M
Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding
2007
AWS
A5.30/A5.30M
Specification for Consumable Inserts – 3rd Edition
2007
AWS
A5.02/A5.02M
Specification for Filler Metal Standard Sizes, Packaging, and Physical Attributes – First Edition; Second Printing; Incorporates Errata: April 2008
2007
AWS
A5.7/A5.7M
Specification for Copper and Copper-Alloy Bare Welding Rods and Electrodes – 7th Edition
2007
AWS
A10.1M
Specification for Calibration and Performance Testing of Secondary Current Sensing Coils and Weld Current Monitors used in Single-Phase AC Resistance Welding – 1st Edition
2007
AWS
D16.2M/D16.2
Guide for Components of Robotic and Automatic Arc Welding Installations
2007
AWS

استاندارد AWS – American Welding Society

C4.3/C4.3M
Recommended Practices for Safe Oxyfuel Gas Heating Torch Operation – Third Edition
2007
AWS
C4.4/C4.4M
Recommended Practices for Heat Shaping and Straightening with Oxyfuel Gas Heating Torches – Second Edition
2007
AWS
BRH
Brazing Handbook – Fifth Edition
2007
AWS
D1.9/D1.9M
Structural Welding Codea Titanium – 1st Edition; Incorporating Addendum: August 26, 2011
2007
AWS
EWH-13
NULL
2007
AWS
A5.3 A5.3M
NULL
2007
AWS
A5.17 A5.17M
NULL
2007
AWS
WHB-3.9
Welding Handbook, Vol. 3, Welding Processes, Part 2 – Ninth Edition
2007
AWS
A4.2M
NULL
2006
AWS
A5.19
Specification for Magnesium Alloy Welding Electrodes and Rods R(1997)
2006
AWS
A5.15
Specification for Welding Electrodes and Rods for Cast Iron
2006
AWS
A4.3
Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic, Bainitic, and Ferritic Steel Weld
2006
AWS

Metal Produced by Arc Welding

A4.4M
Standard Procedures for Determination of Moisture Content of Welding Fluxes and Welding Electrode Flux Coverings
2006
AWS
F1.3M
A Sampling Strategy Guide for Evaluating Contaminants in the Welding Environment
2006
AWS
G1.1M/G1.1
Guide to Ultrasonic Assembly of Thermoplastics
2006
AWS
G1.6
Specification for the Qualification of Plastics Welding Inspectors for Hot Gas, Hot Gas Extrusion, and Heated Tool Butt
2006
AWS

Thermoplastic Welds

C6.2/C6.2M
Specification for Friction Welding of Metals
2006
AWS
F1.1M
Method for Sampling Airborne Particulates Generated by Welding and Allied Processes
2006
AWS
B2.1-1-232
Standard Welding Procedure Specification (SWPS) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding
2006
AWS

(Short Circuiting Transfer Mode) followed by Argon Plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of

Carbon Steel (M-1/P-1/S-1, Group

B2.1-1-233
Standard Welding Procedure Specification (SWPS) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding
2006
AWS

(Short Circuiting Transfer Mode) followed by Argon Plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer

Mode) of Carbon Steel (M-1/P-

B2.1-1-234
Standard Welding Procedure Specification (SWPS) for Argon plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding
2006
AWS

of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, E7XT-X, As-Welded or PWHT Condition,

Primarily Pipe Applications

B2.1-1-235
Standard Welding Procedure Specification (SWPS) for Argon plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray
2006
AWS

Transfer Mode) of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, ER70S-3, Flat Position

Only, As-Welded or PWHT Condi

A4.2M/A4.2
Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex
2006
AWS

Ferritic-Austenitic Stainless Steel Weld Metal

B2.1-1-001
NULL
2006
AWS
C5.7
Recommended Practices for Electrogas Welding
2006
AWS
D11.2
Guide for Welding Iron Castings
2006
AWS
A5.4
Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding
2006
AWS
A5.5
Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding
2006
AWS
A5.9
Specification for Bare Stainless Steel Welding Electrodes and Rods
2006
AWS
D1.1/DL1M
Structural Welding Code
2006
AWS
B2.1-1-002
Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or 2), 3/16 through 7/8 inch, in the As-Welded Condition,
2006
AWS

With or Without Backing

B5.9
Specification for the Qualification of Welding Supervisors
2006
AWS
B5.16
Specification for the Qualification of Welding Engineers
2006
AWS

QC13
Specification for the Certification of Welding Supervisors
2006
AWS
D9.1/D9.1M
Sheet Metal Welding Code
2006
AWS
D16.4-D16.4M
Specification for the Qualification of Robotic Arc Welding Personnel
2005
AWS
B2.1
Specification for Welding Procedure and Performance Qualification
2005
AWS
D1.4/D1.4M
Structural Welding Code – Reinforcing Steel Errata
2005
AWS
A5.18/A5.18M
Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
2005
AWS
A5.20/A5.20M
Specification for Carbon Steel Electrodes for Flux Cored Arc Welding
2005
AWS
A5.28/A5.28M
Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding
2005
AWS
A5.29
Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding
2005
AWS
B5.4
Specification for the Qualification ofWelder Test Facilities
2005
AWS
B2.1-BMG
Specification for Welding Procedure and Performance Qualification
2005
AWS
A5.22
Specification for Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for Gas
2005
AWS

Tungsten Arc Welding

Z49.1
Safety in Welding, Cutting and Allied Processes
2005
AWS
D14.1/D14.1
Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment
2005
AWS
A5.11/A5.11M
Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding
2005
AWS
B2.1-8-023
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-
2005
AWS

8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, As-Welded Condition Site License

C3.7M/C3.7
Specification for Aluminum Brazing
2005
AWS
A5.24/A5.24M
Specification for Zirconium and Zirconium-Alloy Welding Electrodes and Rods
2005
AWS
D14.7/D14.7M
Recommended Practices for Surfacing and Reconditioning of Industrial Mill Rolls – 1st Edition
2005
AWS
D8.6
Specification for Automotive Resistance Spot Welding Electrodes – Supplement to RWMA Bulletin 16
2005
AWS
D8.7M
Recommended Practices for Automotive Weld Quality Resistance SpotWelding
2005
AWS
D14.1/D14.1M
Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment
2005
AWS
TWM
NULL
2005
AWS
B2.1-1-016
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1
2005
AWS

or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition Site License

B2.1-1-017
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1
2005
AWS

or 2), 1/8 Through 1-1/2 Inch Thick, E6010, As-Welded or PWHT Condition Site License

دانلود مجموعه کامل استاندارد AWS

B2.1-1-018
Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-
2005
AWS

1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E71T-8, As-Welded Condition Site License

B2.1-1-019
Standard Welding Procedure Specification (WPS) for CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-
2005
AWS

1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E70T-1 and E71T-1, As-Welded Condition Site Lic

B2.1-1-020
Standard Welding Procedure Specification (WPS) for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding of Carbon Steel
2005
AWS

(M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E70T-1 and E71T-1, As-Welded or PWHT

B2.1-1-021
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc
2005
AWS

Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2 and E7018,

B2.1-1-022
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1
2005
AWS

or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018, As-Welded or

B2.1-1-026
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1
2005
AWS

or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018, As-Welded o

GTW
NULL
2005
AWS
PAPQV
NULL
2005
AWS
CMWS
NULL
2005
AWS

WHB-2.9
Welding Handbook – Welding Processes, Part 1 – Volume 2; Ninth Edition
2004
AWS
PHB-3
NULL
2004
AWS
PHB-6
NULL
2004
AWS
D3.7
Guide for Aluminum Hull Welding
2004
AWS
D16.1M/D16.1
Specification for Robotic Arc Welding Safety
2004
AWS
C7.1
Recommended Practices for Electron Beam Welding
2004
AWS
C5.6
Recommended Practices for Gas Metal Arc Welding R(1994)
2004
AWS
A5.8
Specification for Filler Metals for Brazing and Braze Welding
2004
AWS
A5.1/A5.1M
Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
2004
AWS
D1.1/D1.1M
structural welding code steel
2004
AWS
F1.5M
Methods for Sampling and Analyzing Gases from Welding and Allied Processes
2003
AWS
F1.6
Guide for Estimating Welding Emissions for EPA and Ventilation Permit Reporting
2003
AWS
IBSC
International Brazing and Soldering Conference, February 17-19, 2003; Four Points Sheraton Hotel, San Diego, California
2003
AWS
SGSH
The Independent Shop s Guide to Welding Safety and Health
2003
AWS
SHF
Safety and Health Fact Sheets Third Edition
2003
AWS
B5.15
Specification for the Qualification of Radiographic Interpreters
2003
AWS
B5.1
Specification for the Qualification of Welding Inspectors Data Pending per AWS
2003
AWS
C2.23M/C2.23
Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and
2003
AWS

Composites for the Corrosion Protection of Steel NACE 12, SSPC-CS 23.00

D1.2/D1.2M
Structural Welding Code Aluminum Fourth Edition
2003
AWS
C7.3
Process Specification for Electron Beam Welding
2003
AWS
C2.23M C2.23
NULL
2003
AWS
C2.21M/C2.21
Specification for Thermal Spray Equipment Acceptance Inspection
2003
AWS
C5.5/C5.5M
Recommended Practices for Gas Tungsten Arc Welding
2003
AWS
C5.10/C5.10M
Recommended Practices for Shielding Gases for Welding and Cutting
2003
AWS
RWM
NULL
2003
AWS
EWH-12
NULL
2003
AWS
B2.1-1 8-010
NULL
2002
AWS
C2.20 C2.20M
NULL
2002
AWS
C2.16 C2.16M
NULL
2002
AWS
B2.1-1 8-231
NULL
2002
AWS
D1.5M/D1.5
Bridge Welding Code AASHTO BWC-4
2002
AWS
D8.9M
Recommended Practices for Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel
2002
AWS

Materials SAE D8.9M-2002

D1.1/D1.1M
Structural Welding Code – Steel Errata 07/15/2002 Incorporated
2002
AWS
C2.25/C2.25M
Specification for Thermal Spray Feedstock Solid and Composite Wire and Ceramic Rods
2002
AWS
C4.2
Operator’s Manual for Oxyfuel Gas Cutting
2002
AWS
C2.16/C2.16M
Guide for Thermal-Spray Operator Qualification
2002
AWS
C2.20/C2.20M
Specificatiopn for Thermal Spraying Zinc Anodes on Steel Reinforced Concrete
2002
AWS
CC-RM
Code Clinic for Study of AWS D1.1 Structural Welding Code-Steel – Reference Manual
2002
AWS
B2.1-22-015
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Aluminum, (M/P/S-22 TO M/P/S-22),
2002
AWS

18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site License

ﺍﺳﺘﺎﻧﺪﺍﺭﺩ AWS

B5.14
Specification for the Qualification of Welding Sales Representatives
2002
AWS
C3.3
Recommended Practices for Design, Manufacture, and Examination of Critical Brazed Components
2002
AWS
B2.1-1-011
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Galvanized Steel(M-1), 10 Through
2002
AWS

18 Gauge, in the As-Welded Condition, with or without Backing Site License

B2.1-1-012
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1,P-1, or S-1 to
2002
AWS

M-1, P-1 or S-1), 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing Si

B2.1-8-005
Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding of Austenitic Stainless Steel (M-8 or P-8,
2002
AWS

or S-8), 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site Licen

B2.1-8-009
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8,P-
2002
AWS

8,or S-8), 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site Licens

B2.1-8-013
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel, (SWPS)
2002
AWS

10 Through 18 Gauge, in the As-Welded Condition, with or without Backing Site License

B2.1-1-003
Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding of Galvanized Steel, (M-1), 18 Through 10
2002
AWS

Gauage, in the As-Welded Condition, with or without Backing Site License

B2.1-1-004
Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of
2002
AWS

Carbon Steel, (M-1, Group 1), 18 Through 10 Gauge, in the As-Welded Condition, with or without Back

B2.1-1-007
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Galvanized Steel,(M-1) 18 Through
2002
AWS

10 Gauge, in the As-Welded Condition, with or without Backing Site License

B2.1-1-008
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1, P-1 or S-1), 18
2002
AWS

Through 10 Gauge, in the As-Welded Condition, with or without Backing Site License

B2.1-1/8-006
Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding of Carbon Steel to Austenitic Stainless
2002
AWS

Steel (M-1 to M-8, P-8 or S-8), 18 Through 10 Gauge, in the As-Welded Condition, with or with

B2.1-1/8-010
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless
2002
AWS

Steel (M-1, P-1, S-1 to M-8, P-8, or S-8), 18 Through 10 Gauge, in the As-Welded Condition

B2.1-1/8-014
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless
2002
AWS

Steel, (M-1 to M-8/P-8/S-8, Group 1), 10 Through 18 Gauge, in the As-Welded Condition, w

B2.1-1/8-227
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1
2002
AWS

or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick,

B2.1-1/8-228
Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups
2002
AWS

1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick,

B2.1-1/8-229
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc
2002
AWS

Welding of Carbon Steel (M-1/P-1/ S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/ P-8/S-8,

B2.1-1/8-230
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon
2002
AWS

Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/1

B2.1-1/8-231
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root followed
2002
AWS

by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1,Groups 1 or 2) to Austenitic Stain

PRGWA
The Practical Reference Guide for Welding Aluminum Commercial Applications
2002
AWS
IFS-02
International Index of Welding Filler Metal Classifications
2002
AWS
PRGHF
The Practical Reference Guide for Hardfacing
2002
AWS
G2.1M/G2.1
Guide for the Joining of Wrought Nickel-Based Alloys Reprinted, Incorporates Errata: October 2003
2002
AWS
QC17
Standard for Accreditation of Welding Fabricators for AWS Certified Welding Fabricator Program
2002
AWS
QC19
Specification for AWS Certification of Robotic Arc Welding Personnel
2002
AWS
G1.10M
Guide for The Evaluation of Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic Welds
2001
AWS
PRGQA
The Practical Reference Guide for Welding Aluminum High-Quality Fusion Welding
2001
AWS
PCWC
Preparing Containers for Welding or Cutting
2001
AWS
F2.2
Lens Shade Selector
2001
AWS

دانلود استاندارد جوش AWS

F2.3M
Specification for Use and Performance of Transparent Welding Curtains and Screens
2001
AWS
F3.2M/F3.2
Ventilation Guide for Weld Fume
2001
AWS
WHB-1.9
Welding Science and Technology Ninth Edition; Volume I(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 APP A
Terms and Definitions(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 APP B
Metric Practice Guide for the Welding Industry(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 CH1
Survey of Joining, Cutting, and Allied Processes(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 CH2
Physics of Welding and Cutting(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 CH3
Heat Flow in Welding(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 CH4
Welding Metallurgy(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 CH5
Design for Welding(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 CH6
Test Methods for Evaluating Welded Joints(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 CH7
Residual Stress and Distortion(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 CH8
Symbols for Joining and Inspection(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 CH9
Weldment Tooling and Positioning(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 CH10
Monitoring and Control of Welding and Joining Process(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 CH11
Mechanized, Automated, and Robotic Welding(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 CH12
Economics of Welding and Cutting(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 CH13
Weld Quality(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 CH14
Welding Inspection and Nondestructive Examination(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 CH15
Qualification and Certification(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 CH16
Codes and Other Standards(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 CH17
Safe Practices
2001
AWS
WHB-1.9 HDBK
Welding Science and Technology(Welding Handbook, Volume 1)
2001
AWS
WHB-1.9 IMS
Index of Major Subjects
2001
AWS
WHB-1.9 INDEX
Index
2001
AWS
API-M
Code Clinic for Study of API Standard 1104 Nineteenth Edition Welding of Pipelines and Related Facilities – Reference Manual
2001
AWS
ARE-5
Design for Welding
2001
AWS
ARE-6
Test Methods for Evaluating Welded Joints
2001
AWS
ARE-7
Residual Stress and Distortion
2001
AWS
ARE-12
Economics of Welding and Cutting
2001
AWS
A1.1
Metric Practice Guide for the Welding Industry
2001
AWS
A3.0
Standard Welding Terms and Definitions Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal Cutting, and Thermal Spraying
2001
AWS
A4.4M
Standard Procedures for Determination of Moisture Content of Welding Fluxes and Welding Electrode Flux Coverings
2001
AWS
A5.18/A5.18M
Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
2001
AWS
A5.21
Specification for Bare Electrodes and Rods for Surfacing R(1989)
2001
AWS
B5.16
Specification for the Qualification of Welding Engineers
2001
AWS

B2.1-8-216
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Insert Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2
2001
AWS
B5.2
Specification for the Qualification of Welding Inspector Specialists and Welding Inspector Assistants
2001
AWS
B2.1-8-024
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 Through 1-1/2 Inch Thick, ER3XX, As-Welded Condition Primarily Plate and S
2001
AWS
B2.1-8-025
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, E3XX-XX, A
2001
AWS
B2.1-8-212
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 Through 1-1/2 Inch Thick, ER3XX, As-Welded Condition, Primarily Pipe Appli
2001
AWS
B2.1-1-210
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, INMs-1 and ER70S-2, As-Welded or P
2001
AWS
B2.1-1-211
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Insert Root Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S- 1, Group 1 or 2), 1/8 Through 1-1/2 In
2001
AWS
B2.1-8-214
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, ER3XX, E3X
2001
AWS
C5.2
Recommended Practices for Plasma Arc Cutting and Gouging
2001
AWS
C3.2M/C3.2
Standard Method for Evaluating the Strength of Brazed Joints Errata 2001
2001
AWS
D10.13/D10.13 M
Recommended Practices for the Brazing of Copper Tubing and Fittings for Medical Gas Systems
2001
AWS
D15.1
Railroad Welding Specification – Cars and Locomotives
2001
AWS
D16.2/D16.2M
Guide for Components of Robotic and Automatic Arc Welding Installations
2001
AWS
D16.3M/D16.3
Risk Assessment Guide for Robotic Arc Welding
2001
AWS
D17.1
Specification for Fusion Welding for Aerospace Applications Incorporating Errata
2001
AWS
EWH-11
Effects of Welding on Health, XI
2001
AWS
EWH-ACD
Effects of Welding on Health, All Volumes 1 through 11 and CD-Rom Index
2001
AWS
EWH-ALL
Effects of Welding on Health Set of 11 Books – Includes Hardcopy Index
2001
AWS
EWH-ICD
Effects of Welding on Health, Volume 1 through 11 CD-Rom Index
2001
AWS
C2.18
Guide for the Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and Their Alloys and Composites
2001
AWS
D10.13 D10.13 M
NULL
2001
AWS
F3.2M F3.2
NULL
2001
AWS
WHC1.04
NULL
2001
AWS
WHC1.05
NULL
2001
AWS
WHC1.06
NULL
2001
AWS
WHC1.07
NULL
2001
AWS
WHC1.08
NULL
2001
AWS
WHC1.10
NULL
2001
AWS
WHC1.11
NULL
2001
AWS
WHC1.12
NULL
2001
AWS
B2.1-8-215
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Insert of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, IN3XX and ER3XX, As-Welded
2001
AWS
WIH
Welding Inspection Handbook
2001
AWS
PHB-4
NULL
2000
AWS
PHB-5
NULL
2000
AWS

جامعه جوشکاری آمریکا

SHB
Soldering Handbook(Soldering Manual)
2000
AWS
D10.12M D10. 12
NULL
2000
AWS
D3.5
Guide for Steel Hull Welding R(2000)
2000
AWS
D10.4
Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing R(2000)
2000
AWS
D10.6 D10.6M
NULL
2000
AWS
D14.3/D14.3M
Specification for Welding Earthmoving and Construction Equipment
2000
AWS
D10.12M/D10. 12
Guide for Welding Mild Steel Pipe
2000
AWS
D10.6/D10.6M
Recommended Practices for Gas Tungsten Arc Welding of Titanium Pipe and Tubing
2000
AWS
D10.7M/D10.7
Guide for the Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe R(1992)
2000
AWS
D8.14M/D8.14
Specification for Automotive and Light Truck Components Weld Quality – Aluminum Arc Welding
2000
AWS
D9.1M/D9.1
Sheet Metal Welding Code
2000
AWS
C5.7
Recommended Practices for Electrogas Welding
2000
AWS
D1.1-BI
The Official Book of D1.1 Interpretations – a Collection of Responses to Formal Inquiries About the Requirements of AWS D1.1 (1976-1998)
2000
AWS
C5.3
Recommended Practices for Air Carbon Arc Gouging and Cutting
2000
AWS
C4.5M
Uniform Designation System for Oxyfuel Nozzles Errata:2000
2000
AWS
CM
Certification Manual for Welding Inspectors Fourth Edition
2000
AWS
CM ANNEX A
Additional Resources
2000
AWS
CM ANNEX B
Sample Forms
2000
AWS
CM ANNEX C
Answer Key Review Questions Chapters 1 – 13
2000
AWS
CM CH 1
Welding Inspector
2000
AWS
CM CH 2
Welding Inspector Responsibilities
2000
AWS
CM CH 3
Safety
2000
AWS
CM CH 4
Standards, Including Codes and Specifications
2000
AWS
CM CH 5
Weld Geometry and Welding Terminology
2000
AWS
CM CH 6
Welding and Nondestructive Examination Symbols
2000
AWS
CM CH 7
Weldability, Welding Metallurgy, and Welding Chemistry
2000
AWS
CM CH 8
Destructive Testing
2000
AWS
CM CH 9
Welding, Procedure and Welder Qualification
2000
AWS
CM CH 10
Welding, Brazing, and Cutting Processes
2000
AWS
CM CH 11
Weld and Base Metal Discontinuities
2000
AWS
CM CH 12
Nondestructive Examination (NDE) Processes
2000
AWS
CM CH 13
Inspection Reports
2000
AWS
CM INDEX
(Withdrawn)Index
2000
AWS
CM INTRO
Contents; 2000
2000
AWS
B5.5
Specification for the Qualification of Welding Educators
2000
AWS
B5.9
Specification for the Qualification of Welding Supervisors
2000
AWS
B4.0M
Standard Methods for Mechanical Testing of Welds
2000
AWS
C1.1M/C1.1
Recommended Practices for Resistance Welding
2000
AWS
B5.17
Specification for the Qualification of Welding Fabricators
2000
AWS

A5.13
Specification for Surfacing Electrodes for Shielded Metal Arc Welding
2000
AWS
B1.11
Guide for the Visual Examination of Welds
2000
AWS
B2.1
Specification for Welding Procedure and Performance Qualification
2000
AWS
PWE
The Practical Welding Engineer
2000
AWS
PHB-2
Everyday Pocket Handbook for Visual Inspection and Weld Discontinuities
2000
AWS
FMC
Filler Metal Comparison Charts
2000
AWS
FMPK
Filler Metal Comparison Charts and CD Package
2000
AWS
WI
Welding Inspection Handbook Third Edition(Welding Inspection)
2000
AWS
WI CH 1
Application and Scope(Welding Inspection)
2000
AWS
WI CH 2
Symbols(Welding Inspection)
2000
AWS
WI CH 3
Requirements for the Welding Inspector(Welding Inspection)
2000
AWS
WI CH 4
Welding Inspection Operations(Welding Inspection)
2000
AWS
WI CH 5
Inspection Safety Considerations(Welding Inspection)
2000
AWS
WI CH 6
Quality Assurance(Welding Inspection)
2000
AWS
WI CH 7
Ferrous Welding Metallurgy(Welding Inspection)
2000
AWS
WI CH 8
Preheating and Postweld Heat Treating(Welding Inspection)
2000
AWS
WI CH 9
Weld and Weld Related Discontinuities(Welding Inspection)
2000
AWS
WI CH 10
Qualification of Welding Procedure Specifications(Welding Inspection)
2000
AWS
WI CH 11
Qualification of Welders and Welding Operators(Welding Inspection)
2000
AWS
WI CH 12
Computerization of Welding Inspection and Quality(Welding Inspection)
2000
AWS
WI CH 13
Destructive Testing of Welds(Welding Inspection)
2000
AWS
WI CH 14
Proof Tests(Welding Inspection)
2000
AWS
WI CH 15
Nondestructive Examination Methods(Welding Inspection)
2000
AWS
WI CH 16
Qualification of Nondestructive Examination Personnel(Welding Inspection)
2000
AWS
WI CH 17
Codes and Other Standards(Welding Inspection)
2000
AWS
WI CH 18
Metric Practice(Welding Inspection)
2000
AWS
WI INDEX
Index to Welding Inspection(Welding Inspection)
2000
AWS
WITABLE OF
Welding Inspection Handbook Third Edition(Welding Inspection)
2000
AWS
CONTENTS

WIT-T
Welding Inspection Technology Fourth Edition
2000
AWS
WIT-W-99
Welding Inspection Technology Wookbook Third Edition
1999
AWS
Z49.1
Safety in Welding, Cutting and Allied Processes
1999
AWS
G1.2M/G1.2
Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics
1999
AWS
PRGT
The Practical Reference Guide for Welding Titanium
1999
AWS
PRGVT
The Practical Reference Guide for Welding Inspection Management – Visual Inspection of Pressure Vessels and Pressure
1999
AWS

Piping

PASS
Professional’s Advisor on Welding Stainless Steels
1999
AWS
F4.1
Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping
1999
AWS
PRGWM
The Practical Reference Guide to Welding Metallurgy – Key Concepts for Weldability
1999
AWS
PRGC
The Practical Reference Guide for Corrosion of Welds – Causes and Cures
1999
AWS
SHB
Soldering Handbook(Soldering Manual)
1999
AWS

SHB ANNEX A
Annex A(Soldering Manual)
1999
AWS
SHB ANNEX B
Annex B(Soldering Manual)
1999
AWS
SHB ANNEX C
Annex C(Soldering Manual)
1999
AWS
SHB ANNEX D
Annex D(Soldering Manual)
1999
AWS
SHB ANNEX E
Annex E(Soldering Manual)
1999
AWS
SHB CH 1
Fundamentals of Soldering Technology(Soldering Manual)
1999
AWS
SHB CH 2
Solders Materials(Soldering Manual)
1999
AWS
SHB CH 3
Substrate Materials(Soldering Manual)
1999
AWS
SHB CH 4
Fluxes(Soldering Manual)
1999
AWS
SHB CH 5
Solder Pastes(Soldering Manual)
1999
AWS
SHB CH 6
Assembly Processes(Soldering Manual)
1999
AWS
SHB CH 7
Inspection Techniques for Product Acceptance and Process Optimization(Soldering Manual)
1999
AWS
SHB CH 8
Environmental, Safety, and Health(Soldering Manual)
1999
AWS
SHB INDEX
Index to Soldering Handbook(Soldering Manual)
1999
AWS
SHB INTRO
Soldering Handbook(Soldering Manual)
1999
AWS
API-IM
Code Clinic for Study of API Standard 1104 Eighteenth Edition Welding of Pipelines and Related Facilities – Instruction
1999
AWS

Manual

AWS
Arc Welding Safety
1999
AWS
B1.10
Guide for the Nondestructive Examination of Welds
1999
AWS
A5.3/A5.3M
Specification for Aluminum and Aluminum-Alloy Electrodes for Shielded Metal Arc Welding
1999
AWS
A5.10/A5.10M
Specification for Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods
1999
AWS
B2.1-4-217
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-
1999
AWS

4/P-4, Group 1 or 2), ER80S-B2, 1/8 Through 1/2 in. Thick As-Welded Condition, 1/8 Through 3/4 in. Th

B2.1-4-218
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-
1999
AWS

4/P-4, Group 1 or 2), E8018-B2, 1/8 Through 1/2 in. Thick As-Welded Condition, 1/8 Through 1-1/2 in

B2.1-4-219
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc
1999
AWS

Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 Through 1/2 in. Thick, As-Welded Con

B2.1-4-220
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-
1999
AWS

Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 Through 1/2 in. Thick, As-Welded Conditi

B2.1-4-221
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) Followed by
1999
AWS

Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 Through 1/2

B2.1-5A-222
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-
1999
AWS

5A/P-5A), ER90S-B3, 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 3/4 in. Thick, PWHT

B2.1-5A-223
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-
1999
AWS

5A/P-5A), ER9018-B3, 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 1-1/2 in. Thick,

B2.1-5A-224
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc
1999
AWS

Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8

B2.1-5A-225
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-
1999
AWS

Molybdenum Steel (M-5A/P-5A), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 3/4 i

B2.1-5A-226
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) Followed by
1999
AWS

Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 Through 1/2 in. Thick,

C1.4M/C1.4
Specification for Resistance Welding of Carbon and Low-Alloy Steels
1999
AWS

پکیج ویژه استاندارد AWS

C3.4
Specification for Torch Brazing
1999
AWS
C3.5
Specification for Induction Brazing
1999
AWS
C3.6
Specification for Furnace Brazing
1999
AWS
C3.7
Specification for Aluminum Brazing
1999
AWS
C7.3
Process Specification for Electron Beam Welding
1999
AWS
C7.1
Recommended Practices for Electron Beam Welding
1999
AWS
D1.6
Structural Welding Code – Stainless Steel
1999
AWS
D3.6M
Specification for Underwater Welding
1999
AWS
D10.10/D.10M
Recommended Practices for Local Heating of Welds in Piping and Tubing
1999
AWS
D16.4
Specification for the Qualification of Robotic Arc Welding Personnel
1999
AWS
F1.1
Method for Sampling Airborne Particulates Generated by Welding and Allied Processes
1999
AWS
F1.2
Laboratory Method for Measuring Fume Generation Rates and Total Fume Emission of Welding and Allied Processes
1999
AWS
F1.3
Sampling Strategy Guide for Evaluating Contaminants in the Welding Environment
1999
AWS
D18.1
Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygienic) Applications
1999
AWS
D18.2
Guide to Weld Discoloration Levels on Inside of Austenitic Stainless Steel Tube
1999
AWS
DPW
Design and Planning Manual for Cost-Effective Welding
1999
AWS
D1.3
Structural Welding Code – Sheet Steel Errata
1998
AWS
D1.4
Structural Welding Code – Reinforcing Steel Errata
1998
AWS
C7.2
Recommended Practices for Laser Beam Welding, Cutting, and Drilling
1998
AWS
CC-IM
Code Clinic for Study of AWS D1.1 Structural Welding code – Steel
1998
AWS
B4.0
Standard Methods for Mechanical Testing of Welds
1998
AWS
B2.1-8-215
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Insert of Austenitic
1998
AWS

Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, IN3XX and ER3XX, As-Welded

B2.1-1-027
Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-
1998
AWS

1, Group 1 or 2), 1/8 Through 1/2 Inch Thick, E71T-11, As-Welded Condition Site License

A2.1-DC
Welding Symbols Chart – Desk Size (Laminated)
1998
AWS
A2.1-WC
Welding Symbols Chart – Wall Size of A2.1 (Laminated)
1998
AWS
A2.1 WC & DC
Welding Symbols Wall and Desk Charts (Laminated)
1998
AWS
A2.4
Standard Symbols for Welding, Brazing, and Nondestructive Examination
1998
AWS
A2.4/A2.1 SET
Standard Symbols for Welding, Brazing, and Nondestructive Examination Book and Charts Set
1998
AWS
A5.12/A5.12M
Specification for Tungsten and Tungsten-Alloy Electrodes for Arc Welding and Cutting
1998
AWS
A5.29
Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding
1998
AWS
EWH-10
Effects of Welding on Health X
1998
AWS
FACT SHEET
Laser Welding and Cutting Safety
1998
AWS
NO. 19

IFS-P
Package of Book and CD to IFS:1998
1998
AWS
IQCC
Welding Inspection & Quality Control Course 36; Lesson Number and Title; 1-14
1998
AWS
GWF
Guide for the Design of a Welder Training Facility
1998
AWS
URS
AWS Ultrasonic Rulers and Guide Set
1998
AWS
VIW-IM
Visual Inspection Workshop Instructors Manual
1998
AWS
WHB-4 PART 2
Materials and Applications – Part 2 Eighth Edition(Welding Handbook, Vol. 4)
1998
AWS

WHB-4 PART 2 CH 1
Carbon and Low-Alloy Steels(Welding Handbook, Vol. 4)
1998
AWS
WHB-4 PART
High-Alloy Steels(Welding Handbook, Vol. 4)
1998
AWS
2 CH 2

WHB-4 PART
Coated Steels(Welding Handbook, Vol. 4)
1998
AWS
2 CH 3

WHB-4 PART
Tool and Die Steels(Welding Handbook, Vol. 4)
1998
AWS
2 CH 4

WHB-4 PART
Stainless and Heat-Resisting Steels(Welding Handbook, Vol. 4)
1998
AWS
2 CH 5

WHB-4 PART
Clad and Dissimilar Metals(Welding Handbook, Vol. 4)
1998
AWS
2 CH 6

WHB-4 PART
Surfacing(Welding Handbook, Vol. 4)
1998
AWS
2 CH 7

WHB-4 PART
Cast Irons(Welding Handbook, Vol. 4)
1998
AWS
2 CH 8

WHB-4 PART
Titanium and Titanium Alloys(Welding Handbook, Vol. 4)
1998
AWS
2 CH 9

WHB-4 PART
Reactive Refractory, and Precious Metals and Alloys(Welding Handbook, Vol. 4)
1998
AWS
2 CH 10

WHB-4 PART
Materials and Applications – Part 2 Eighth Edition(Welding Handbook, Vol. 4)
1998
AWS
2 HDBK

WHB-4 PART
Welding Handbook Index of Major Subjects(Welding Handbook, Vol. 4)
1998
AWS
2 INDEX

PHB-7
NULL
1998
AWS
PHB-8
NULL
1998
AWS
PARW
NULL
1998
AWS
WIT
Welding Inspection Technology WORKBOOK
1998
AWS
RWMA
NULL
1997
AWS
BULLETIN 34

فروش استاندارد AWS

VIW-M
Visual Inspection Workshop Reference Manual
1997
AWS
WQAG
Welding Quality Assurance Guideline for Fabricators
1997
AWS
FACT SHEET
Lockout/Tagout
1997
AWS
NO. 18

FWSH
Design Handbook for Calculating Fillet Weld Sizes
1997
AWS
JWE
Jefferson’s Welding Encyclopedia Eighteenth Edition
1997
AWS
FACT SHEET
Thermal Spraying Safety
1997
AWS
NO. 20

FGW
Contents(Fumes and Gases in the Welding Environment)
1997
AWS
FACT SHEET
Radiation
1997
AWS
NO. 2

FACT SHEET
Pacemakers and Welding
1997
AWS
NO. 16

FACT SHEET
Electrical Hazards
1997
AWS
NO. 5

A5.30
Specification for Consumable Inserts
1997
AWS

A5.32
Specification for Welding Shielding Gases
1997
AWS
A5-ALL
Filler Metal Procurement Guidelines
1997
AWS
A5.14/A5.14M
Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods
1997
AWS
A5.17/A5.17M
Specification for Carbon Steel Electrodes and Fluxes for Submerged Arc Welding
1997
AWS
A5.23/A5.23M
Specification for Low Alloy Steel Electrodes and Fluxes for Submerged Arc Welding
1997
AWS
A5.25/A5.25M
Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding R(2003)
1997
AWS
A5.26/A5.26M
Specification for Carbon and Low-Alloy Steel Electrodes and Electrogas Welding R(2003)
1997
AWS
A4.2M/A4.2
Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex
1997
AWS

Ferritic-Austenitic Stainless Steel Weld Metal

A5.11/A5.11M
Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding
1997
AWS
B2.1-8-213
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-
1997
AWS

8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, ER3XX-XX, As-Welded Condition (Primarily Pipe A

D14.1
Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment
1997
AWS
D8.8
Specification for Automotive and Light Truck Components Weld Quality – Arc Welding SAE HS J1196
1997
AWS
F1.4
Methods for Analysis of Airborne Particulates Generated by Welding and Allied Processes
1997
AWS
D14.4
Specification for Welded Joints in Machinery and Equipment
1997
AWS
D14.5
Specification for Welding of Presses and Press Components
1997
AWS
D14.6
Specification for Welding of Rotating Elements of Equipment
1996
AWS
EG3.0
Guide for the Training and Qualification of Welding Personnel Level II – Advanced Welder
1996
AWS
EG4.0
Guide for the Training and Qualification of Welding Personnel Level III – Expert Welder
1996
AWS
ELW-SET
EG2.0-95 And QC10-95
1996
AWS
ELW-SET-B
EG3.0-96 and QC11-96
1996
AWS
ELW-SET-C
EG4.0-96 and QC12-96
1996
AWS
ELW-SET-D
Econo Package: EG2.0-95, EG3.0-96, EG4.0-96, QC10-95, QC11-96, QC12-96
1996
AWS
D10.8
Recommended Practices for Welding of Chromium-Molybdenum Steel Piping and Tubing
1996
AWS
D1.5-M
Bridge Welding Code AASHTO BWC-3
1996
AWS
A5.5
Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding
1996
AWS
A5.28
Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding
1996
AWS
B2.1-1-201
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1
1996
AWS

or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill

B2.1-1-202
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1
1996
AWS

or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphi

B2.1-1-203
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1
1996
AWS

or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill), As-Welded Condition (Primarily Pi

B2.1-1-204
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1
1996
AWS

or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill Root with the Balance Vertical Up

B2.1-1-205
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1
1996
AWS

or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphi

B2.1-1-206
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1
1996
AWS

or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Up

B2.1-1-207
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1
1996
AWS

or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2, As- Welded or PWHT Condition (Primarily Pipe Appl

B2.1-1-208
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1
1996
AWS

or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition (Primarily Pipe Appli

B2.1-1-209
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2 and E7018,
1996
AWS
FACT SHEET NO. 17
Electric and Magnetic Fields (EMF)
1996
AWS
PHSP WC & DC
Suggester Filler Materials and Minimum Preheat Temperatures for Welding Steel Pipe with Wall Thickness Less than 3/4″, Wall and Desk Charts
1996
AWS
PHSS WC & DC
Suggested Pretemperatures for Welding Structural Steel Materails Wall and Desk Charts
1996
AWS
FMS D
Suggested Filler Materials for Welding Structural Steel Desk Chart
1996
AWS
FMS W
Suggested Filler Materials for Welding Structural Steel Wall Chart
1996
AWS
FMS WC & DC
Suggested Filler Materials for Welding Structural Steel, Wall Chart and Desk Chart
1996
AWS
FORM E-1
Welding Procedure Specification (WPS)
1996
AWS
FORM E-3
WPS Qualification Test Record for Electroslag and Electrogas Welding
1996
AWS
FORM E-4
Welder, Welding Operator, or Tack Welder Qualification Test Record
1996
AWS
FORM E-7
Report of Radiographic Examination of Welds
1996
AWS
FORM E-8
Report of Magnetic-Particle Examination of Welds
1996
AWS
FORM E-9
Stud Welding Procedure Specification (WPS) or Procedure Qualification Record (PQR) or Welding Qualification Record (WQR)
1996
AWS
QC1
Standard for AWS Certification of Welding Inspectors
1996
AWS
TSM
Thermal Spray Manual – A Practicle Reference Guide
1996
AWS
QC11
Specification for Qualification and Certification for Level II – Advanced Welders
1996
AWS
QCM12
Specification for Qualification and Certification for Level III – Expert Welders
1996
AWS
WHB-3
Materials and Applications – Part 1(Welding Handbook, Vol. 3)
1996
AWS
WHB-3 CH 1
Aluminum and Aluminum Alloys(Welding Handbook, Vol. 3)
1996
AWS
WHB-3 CH 2
Magnesium and Magnesium Alloys(Welding Handbook, Vol. 3)
1996
AWS
WHB-3 CH 3
Copper and Copper Alloys(Welding Handbook, Vol. 3)
1996
AWS
WHB-3 CH 4
Nickel and Cobalt Alloys(Welding Handbook, Vol. 3)
1996
AWS
WHB-3 CH 5
Lead and Zinc(Welding Handbook, Vol. 3)
1996
AWS
WHB-3 CH 6
Plastics(Welding Handbook, Vol. 3)
1996
AWS
WHB-3 CH 7
Composites(Welding Handbook, Vol. 3)
1996
AWS
WHB-3 CH 8
Ceramics(Welding Handbook, Vol. 3)
1996
AWS
WHB-3 CH 9
Maintenance and Repair Welding(Welding Handbook, Vol. 3)
1996
AWS
WHB-3 CH 10
Underwater Welding and Cutting(Welding Handbook, Vol. 3)
1996
AWS
WHB-3 HDBK
Materials and Applications – Part 1(Welding Handbook, Vol. 3)
1996
AWS
WHB-3 INDEX
Index(Welding Handbook, Vol. 3)
1996
AWS
RWMA BULLETIN 14
NULL
1996
AWS
RWMA BULLETIN 16
NULL
1996
AWS
QC12
NULL
1996
AWS
WHB-3.8
NULL
1996
AWS
QC10
Specification for Qualification and Certification for Entry Level Welders
1995
AWS
UGFM
AWS User’s Guide to Filler Metals
1995
AWS

خرید پکیج استاندارد انجمن جوشکاری آمریکا

WJT-G
Joint – Weld Terminology and Standard Welding Symbols Interpretation
1995
AWS
PRG
The Practical Reference Guide for Radiographic Inspection – Acceptance Criteria
1995
AWS
FACT SHEET
Noise
1995
AWS
NO. 3

FACT SHEET
Chromium and Nickel in Welding Fume
1995
AWS
NO. 4

FACT SHEET
Fumes and Gases
1995
AWS
NO. 1

FACT SHEET
Fire and Explosion Prevention
1995
AWS
NO. 6

FACT SHEET
Burn Protection
1995
AWS
NO. 7

FACT SHEET
Mechanical Hazards
1995
AWS
NO. 8

FACT SHEET
Tripping and Falling
1995
AWS
NO. 9

FACT SHEET
Falling Objects
1995
AWS
NO. 10

FACT SHEET
Confined Spaces
1995
AWS
NO. 11

FACT SHEET
Contact Lens Wear
1995
AWS
NO. 12

FACT SHEET
Ergonomics in the Welding Environment
1995
AWS
NO. 13

FACT SHEET
Graphic Symbols for Precautionary Labels
1995
AWS
NO. 14

FACT SHEET
Style Guidelines for Safety and Health Documents
1995
AWS
NO. 15

EWH-9
Effects of Welding on Health IX
1995
AWS
A5.20
Specification for Carbon Steel Electrodes for Flux Cored Arc Welding
1995
AWS
A5.22
Specification for Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for Gas
1995
AWS

Tungsten Arc Welding

AWR
Arc Welding with Robots: Do’s and Don’ts
1995
AWS
D10.13
Recommended Practices for the Brazing of Copper Pipe and Tubing for Medical Gas Systems
1995
AWS
EG2.0
Guide for The Training and Qualification of Welding Personnel Entry Level Welder
1995
AWS
D15.2
Recommended Practices for the Welding of Rails and Related Rail Components for Use by Rail Vehicles
1994
AWS
D16.2
Standard for Components of Robotic and Automatic Welding Installations
1994
AWS
C5.10
Recommended Practices for Shielding Gases for Welding and Plasma Arc Cutting
1994
AWS
B2.1-1-016
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1
1994
AWS

or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition Site License

B2.1-1-017
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1
1994
AWS

or 2), 1/8 Through 1-1/2 Inch Thick, E6010, As-Welded or PWHT Condition Site License

B2.1-1-018
Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-
1994
AWS

1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E71T-8, As-Welded Condition Site License

B2.1-1-019
Standard Welding Procedure Specification (WPS) for CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-
1994
AWS

1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E70T-1 and E71T-1, As-Welded Condition Site Lic

B2.1-1-020
Standard Welding Procedure Specification (WPS) for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E70T-1 and E71T-1, As-Welded or PWHT
1994
AWS
B2.1-1-021
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc
1994
AWS

Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2 and E7018,

B2.1-1-022
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1
1994
AWS

or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018, As-Welded or

B2.1-1-026
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1
1994
AWS

or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018, As-Welded o

B2.1-8-023
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-
1994
AWS

8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, As-Welded Condition Site License

EWH-8
Effects of Welding on Health VIII
1994
AWS
PHB-1
Everyday Pocket Handbook for Arc Welding Steel
1994
AWS
WM 1.4
Welding Metallurgy Volume I, Fundamentals Fourth Edition; Volume 1
1994
AWS
RWMA
NULL
1994
AWS
BULLETIN 5

QC7SUPP C
NULL
1993
AWS
QC7SUPP F
NULL
1993
AWS
QC7SUPP G
NULL
1993
AWS
QC7
Supplement Fu Chemical Plant and Petroleum Refinery Piping
1993
AWS
Supplement F

QC7
Supplement Gu AWS Performance Qualification Test
1993
AWS
Supplement G

QC7
Standard for AWS Certified Welders
1993
AWS
QC2
Recommended Practice for the Training, Qualification and Certification of Welding Inspector Specialist and Welding
1993
AWS

Inspector Assistant

A5.9
Specification for Bare Stainless Steel Welding Electrodes and Rods
1993
AWS
A4.3
Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic, Bainitic, and Ferritic Steel Weld
1993
AWS

Metal Produced by Arc Welding

A5.01
Filler Metal Procurement Guidelines R(1999)
1993
AWS
A2.4-SP
Standard Symbols for Welding, Brazing and Nondestructive Examination Spanish
1993
AWS
D3.5
Guide for Steel Hull Welding R(2000)
1993
AWS
D14.2
Specification for Metal Cutting Machine Tool Weldments
1993
AWS
C5.4
Recommended Practices for Stud Welding
1993
AWS
C2.18
Guide for the Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and Their Alloys and Composites
1993
AWS
BRS
Braze Safety
1992
AWS
A5.4
Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding Supersedes SAE AMS 5777 R(2000)
1992
AWS
A5.2
Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding
1992
AWS
A5.8
Specification for Filler Metals for Brazing and Braze Welding
1992
AWS
A5.19
Specification for Magnesium Alloy Welding Electrodes and Rods R(1997)
1992
AWS
A5.31
Specification for Fluxes for Brazing and Braze Welding R(2003)
1992
AWS
A9.1
Standard Guide for Describing Arc Welds in Computerized Material Property and Nondestructive Examination Databases
1992
AWS
A9.2
Standard Guide for Recording Arc Weld Material Property and Nondestructive Examination Data in Computerized
1992
AWS

Databases

QC5G
Guide to AWS Welding Educator Qualification and Certification
1992
AWS

FSW
Fire Safety in Welding and Cutting
1992
AWS
QC5
Standard for Certification of Welding Educators
1991
AWS
WHB-2
Welding Handbook Volume 2 Eighth Edition(Welding Handbook, Vol. 2)
1991
AWS
WHB-2 CH 1
Arc Welding Power Sources(Welding Handbook, Vol. 2)
1991
AWS
WHB-2 CH 2
Shielded Metal Arc Welding(Welding Handbook, Vol. 2)
1991
AWS
WHB-2 CH 3
Gas Tungsten Arc Welding(Welding Handbook, Vol. 2)
1991
AWS
WHB-2 CH 4
Gas Metal Arc Welding(Welding Handbook, Vol. 2)
1991
AWS
WHB-2 CH 5
Flux Cored Arc Welding(Welding Handbook, Vol. 2)
1991
AWS
WHB-2 CH 6
Submerged Arc Welding(Welding Handbook, Vol. 2)
1991
AWS
WHB-2 CH 7
Electrogas Welding(Welding Handbook, Vol. 2)
1991
AWS
WHB-2 CH 8
Electroslag Welding(Welding Handbook, Vol. 2)
1991
AWS
WHB-2 CH 9
Stud Welding(Welding Handbook, Vol. 2)
1991
AWS
WHB-2 CH 10
Plasma Arc Welding(Welding Handbook, Vol. 2)
1991
AWS
WHB-2 CH 11
Oxyfuel Gas Welding(Welding Handbook, Vol. 2)
1991
AWS
WHB-2 CH 12
Brazing(Welding Handbook, Vol. 2)
1991
AWS
WHB-2 CH 13
Soldering(Welding Handbook, Vol. 2)
1991
AWS
WHB-2 CH 14
Oxygen Cutting(Welding Handbook, Vol. 2)
1991
AWS
WHB-2 CH 15
Arc Cutting and Gouging
1991
AWS
WHB-2 CH 16
Laser Beam and Water Jet Cutting
1991
AWS
WHB-2 CH 17
Spot, Seam, and Projection Welding
1991
AWS
WHB-2 CH 18
Flash, Upset, and Percussion Welding
1991
AWS
WHB-2 CH 19
Resistance Welding Equipment
1991
AWS
WHB-2 CH 20
High-Frequency Welding
1991
AWS
WHB-2 CH 21
Electron Beam Welding
1991
AWS
WHB-2 CH 22
Laser Beam Welding
1991
AWS
WHB-2 CH 23
Friction Welding
1991
AWS
WHB-2 CH 24
Explosion Welding
1991
AWS
WHB-2 CH 25
Ultrasonic Welding
1991
AWS
WHB-2 CH 26
Diffusion Welding and Brazing
1991
AWS
WHB-2 CH 27
Adhesive Bonding of Metals
1991
AWS
WHB-2 CH 28
Thermal Spraying
1991
AWS
WHB-2 CH 29
Other Welding Processes
1991
AWS
A5.1
Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
1991
AWS
B2.1-1-012
(Withdrawn)Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1,
1991
AWS

Group 1), 10 Through 18 Gauge, in the As-Welded Condition, with or Without Backing Site License

B2.1-1-013
(Withdrawn)Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Steel, (M-
1991
AWS

8/P-8), 10 Through 18 Gauge, in the As-Welded Condition, with or Without Backing Site License

B2.1-1-014
(Withdrawn)Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel to
1991
AWS

Austenitic Stainless Steel, (M-1 to M-8), 10 Through 18 Gauge, in the As-Welded Condition, with or Wi

B2.1-1-015
(Withdrawn)Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Aluminum, (M-22 to P-
1991
AWS

22), 10 Through 18 Gauge, in the As-Welded Condition, with or Without Backing Site License

BRH
Brazing Handbook 1991 Fourth Edition
1991
AWS

BRH APP A
Definitions of Terms Fourth Editioin(Brazing Handbook)
1991
AWS
BRH APP B
Properties of Brazeable Metals and Alloys Fourth Edition
1991
AWS
BRH APP C
Thermal Expansion Data Fourth Edition
1991
AWS
BRH CH 1
Fundamentals Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 2
Brazement Design and Drafting Room Practice Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 3
Brazing Filler Metals Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 4
Fluxes and Atmospheres Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 5
Corrosion Resistance of Brazed Joints Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 6
Safety and Health Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 7
Precleaning and Surface Preparation Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 8
Assembly and Fixturing Fourth Editiion(Brazing Handbook)
1991
AWS
BRH CH 9
Torch Brazing Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 10
Furnace Brazing Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 11
Induction Brazing Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 12
Dip Brazing Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 13
Resistance Brazing Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 14
Braze Welding Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 15
Other Processes Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 16
Inspection of Brazed Joints Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 17
Codes and Other Standards Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 18
Copper and Copper Alloys Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 19
Precious Metals(Brazing Handbook)
1991
AWS
BRH CH 20
Low Carbon, Low Alloy, and Tool Steels Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 21
Brazing of Cast Iron Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 22
Pipe and Tube Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 23
Nickel Base and Cobalt-Containing Alloys Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 24
Stainless Steels Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 25
Aluminum and Aluminum Alloys Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 26
Magnesium and Magnesium Alloys Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 27
Titanium, Zirconium, and Beryllium Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 28
Refractory Metals – Niobium, Molybdenum, Tantalum, and Tungsten Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 29
Electron Tube and Vacuum Equipment Brazing Fourth Edition(Brazing Handbook)
1991
AWS
BRH CH 30
Carbide Tools Fourth Edition
1991
AWS
BRH CH 31
Ceramic Brazing Fourth Edition
1991
AWS
BRH CH 32
Carbon and Graphite Fourth Edition
1991
AWS
BRH CH 33
Honeycomb Structure Brazing Fourth Edition
1991
AWS
BRH INDEX
Index Fourth Edition(Brazing Handbook)
1991
AWS
BRH INTRO
Brazing Handbook 1991 Fourth Edition
1991
AWS
B2.1-1-011
(Withdrawn)Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Galvanized Steel, 10
1991
AWS

Through 18 Gauge, in the As-Welded Condition, with or Without Backing Site License

B2.2
Standard for Brazing Procedure and Performance Qualification
1991
AWS

دانلود استاندارد AWS 2019

B2.1.002
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 Through 7/8 Inch, in the As-Welded Condition, with or without Backing Site License
1990
AWS
C3.8
Recommended Practices for Ultrasonic Inspection of Brazed Joints R(1998)
1990
AWS
D3.7
Guide for Aluminum Hull Welding
1990
AWS
A5.15
Specification for Welding Electrodes and Rods for Cast Iron
1990
AWS
A5.16
Specification for Titanium and Titanium Alloy Welding Electrodes and Rods R(1997)
1990
AWS
A5.24
Specification for Zirconium and Zirconium Alloy Welding Electrodes and Rods R(1997)
1990
AWS
B2.1.001
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or
1990
AWS

2), 3/16 Through 3/4 Inch, in the As-Welded Condition, with Backing Site License

B2.1-1-008
(Withdrawn)Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1,
1990
AWS

Group 1), 10 Through 18 Gage, in the As-Welded Condition, with or Without Backing Site License

B2.1-1-005
(Withdrawn)Standard Welding Procedure Specification (WPS) for Gas Metal Arc Welding of Austenitic Stainless Steel
1990
AWS

(M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing Site Lice

B2.1-1-006
(Withdrawn)Standard Welding Procedure Specification (WPS) for Gas Metal Arc Welding of Carbon Steel to Austenitic
1990
AWS

Stainless Steel (M-1 to M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition, with or wi

B2.1-1-007
(Withdrawn)Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Galvanized Steel, 10
1990
AWS

Through 18 Gage, in the As-Welded Condition, with or Without Backing Site License

B2.1-1-009
(Withdrawn)Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel
1990
AWS

(M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition, with or Without Backing Site L

B2.1-1-010
(Withdrawn)Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel to
1990
AWS

Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 Through 18 Gauge, in the As-Welded Condition, with o

WHB-2 HDBK
Welding Handbook Volume 2 Eighth Edition(Welding Handbook, Vol. 2)
1990
AWS
WHB-2 INDEX
Index(Welding Handbook, Vol. 2)
1990
AWS
OWS
Oxyfuel Gas Welding, Cutting and Heating Safety
1990
AWS
EWH-7
Effects of Welding on Health VII
1990
AWS
B2.1-1-001
NULL
1990
AWS
B2.1-1-002
Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or 2), 3/16 through 7/8 inch, in the As-Welded Condition,
1990
AWS

With or Without Backing

EWH-6
Effects of Welding on Health VI
1989
AWS
F3.1
Guide for Welding Fume Control
1989
AWS
QC4
Standard for Accreditation of Test Facilities for AWS Certified Welder Program
1989
AWS
C6.1
Recommended Practices for Friction Welding R(1998)
1989
AWS
D11.2
Guide for Welding Iron Castings
1989
AWS
C5.6
Recommended Practices for Gas Metal Arc Welding R(1994)
1989
AWS
D8.7
Recommended Practices for Automotive Weld Quality-Resistance Spot Welding (SAE J 1188) R(1994)
1988
AWS
AWS-S
Arc Welding Safety (Seguridad en la Soldadura por Arco) in Spanish
1988
AWS
SP
Safe Practices Reprint of WHB-1 CH 16
1988
AWS
HOT
Hands-On Training use of Measuring Tools for the AWS Certified Welding Inspector Hands-On Examination
1987
AWS
HST
Hands-On, Self-Training
1987
AWS
D10.11
Recommended Practices for Root Pass Welding of Pipe without Backing R(1992)
1987
AWS
EWH-5
Effects of Welding on Health V
1987
AWS
D10.4
Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing R(2000)
1986
AWS
UEAW
Handbook on the Ultrasonic Examination of Austenitic Welds
1986
AWS
WCI
Welding of Cast Iron – a Selection of Papers
1985
AWS

TSS
Thermal Spraying – Practice, Theory, and Application
1985
AWS
WHB-5
Engineering, Costs, Quality, and Safety(Welding Handbook, Vol. 5)
1984
AWS
WHB-5 CH 1
Design for Welding(Welding Handbook, Vol. 5)
1984
AWS
WHB-5 CH 2
Symbols for Welding, Brazing, and Nondestructive Examination(Welding Handbook, Vol. 5)
1984
AWS
WHB-5 CH 3
Economics and Cost Estimating(Welding Handbook, Vol. 5)
1984
AWS
WHB-5 CH 4
Fixtures and Positioners(Welding Handbook, Vol. 5)
1984
AWS
WHB-5 CH 5
Automation and Control(Welding Handbook, Vol. 5)
1984
AWS
WHB-5 CH 6
Codes and Standards(Welding Handbook, Vol. 5)
1984
AWS
WHB-5 CH 7
Qualification and Certification(Welding Handbook, Vol. 5)
1984
AWS
WHB-5 CH 8
Weld Quality(Welding Handbook, Vol. 5)
1984
AWS
WHB-5 CH 9
Inspection(Welding Handbook, Vol. 5)
1984
AWS
WHB-5 CH 10
Safe Practices(Welding Handbook, Vol. 5)
1984
AWS
WHB-5 HDBK
Engineering, Costs, Quality, and Safety(Welding Handbook, Vol. 5)
1984
AWS
WHB-5 INDEX
Index(Welding Handbook, Vol. 5)
1984
AWS
WHB-ALL
Welding Handbook Set Includes Volumes 1 through 4
1984
AWS
A5.6
Specification for Covered Copper and Copper Alloy Arc Welding Electrodes R(2000)
1984
AWS
A5.7
Specification for Copper and Copper Alloy Bare Welding Rods and Electrodes R(1991)
1984
AWS
CAWF
Characterization of Arc Welding Fume
1983
AWS
EWH-3
Effects of Welding on Health III
1983
AWS
EWH-4
Effects of Welding on Health IV
1983
AWS
C4.3
Operators Manual for Oxyfuel Gas Heating Torch Operation
1983
AWS
LVOS
Laboratory Validation of Ozone Sampling with Spill-Proof Impingers
1983
AWS
WHB-4
Metals and Their Weldability(Welding Handbook, Vol. 4)
1982
AWS
WHB-4 CH 1
Carbon and Low Alloy Steels(Welding Handbook, Vol. 4)
1982
AWS
WHB-4 CH 2
Stainless Steels(Welding Handbook, Vol. 4)
1982
AWS
WHB-4 CH 3
Tool and Die Steels(Welding Handbook, Vol. 4)
1982
AWS
WHB-4 CH 4
High Alloy Steels(Welding Handbook, Vol. 4)
1982
AWS
WHB-4 CH 5
Cast Irons(Welding Handbook, Vol. 4)
1982
AWS
WHB-4 CH 6
Nickel and Cobalt Alloys(Welding Handbook, Vol. 4)
1982
AWS
WHB-4 CH 7
Copper Alloys(Welding Handbook, Vol. 4)
1982
AWS
WHB-4 CH 8
Aluminum Alloys(Welding Handbook, Vol. 4)
1982
AWS
WHB-4 CH 9
Magnesium Alloys(Welding Handbook, Vol. 4)
1982
AWS
WHB-4 CH 10
Titanium, Zirconium, Hafnium, Tantalum, and Columbium(Welding Handbook, Vol. 4)
1982
AWS
WHB-4 CH 11
Other Metals(Welding Handbook, Vol. 4)
1982
AWS
WHB-4 CH 12
Dissimilar Metals(Welding Handbook, Vol. 4)
1982
AWS
WHB-4 HDBK
Metals and Their Weldability(Welding Handbook, Vol. 4)
1982
AWS
WHB-4 INDEX
Index(Welding Handbook, Vol. 4)
1982
AWS
WFDP
Welding Fume Control, a Demonstration Project 1982
1982
AWS
EWH-2
Effects of Welding on Health II
1981
AWS
C5.5
Recommended Practices for Gas Tungsten Arc Welding R(1994)
1980
AWS
OPP
Underwater Welding of Offshore Platforms and Pipelines
1980
AWS

دانلود استاندارد AWS 2020

FGW APP C
Tables C1 to C4 Summary of Original Data, Part III(Fumes and Gases in the Welding Environment)
1979
AWS
FGW APP D
Tables D1 and D2 Laboratory Data Sheets for Part IV(Fumes and Gases in the Welding Environment)
1979
AWS
FGW APP A
Table A1 Electrodes Used in Part III(Fumes and Gases in the Welding Environment)
1979
AWS
FGW APP B
Tables B1 to B43 (Tubular Data on Fume Generation Characteristics of Electrodes Used in Part II)(Fumes and Gases in the
1979
AWS

Welding Environment)

FGW APP E
Tables E1 to E6 Laboratory Data Sheets for Part V(Fumes and Gases in the Welding Environment)
1979
AWS
FGW PT 1
Ventilation Studies(Fumes and Gases in the Welding Environment)
1979
AWS
FGW PT 2
Arc Welding Fumes and Gases(Fumes and Gases in the Welding Environment)
1979
AWS
FGW PT 3
Brazing Fumes and Gases(Fumes and Gases in the Welding Environment)
1979
AWS
FGW PT 4
Thermal Spraying Fumes and Gases(Fumes and Gases in the Welding Environment)
1979
AWS
FGW PT 5
Fumes and Gases from Oxygen Cutting(Fumes and Gases in the Welding Environment)
1979
AWS
EWH-1
Effects of Welding on Health I
1979
AWS
EWH-I
Effects of Welding on Health, Volume 1 through 11 Book Index
1979
AWS
AWS FUMES
Contents(Fumes and Gases in the Welding Environment)
1979
AWS
AND GASES

AWN
Arc Welding and Cutting Noise
1979
AWS
F6.1
Method for Sound Level Measurement of Manual Arc Welding and Cutting Processes R(1989)
1978
AWS
F2.1
Recommended Safe Practice for Electron Beam Welding and Cutting
1978
AWS
C4.1
Criteria for Describing Oxygen-Cut Surfaces
1977
AWS
C4.1 SET
Oxygen Cutting Surface Roughness Gauge and Chart for Criteria Describing Oxygen Cut Surfaces
1977
AWS
C4.1-WC
Criteria for Describing Oxygen-Cut Surface (8 1/2″ x 11″ 5 PG Chart)
1977
AWS
ULR
NULL
1976
AWS
D12.1
(Cancelled)Reinforcing Steel Welding Code Best Copy Available; Superseded by AWS D1.4
1975
AWS
C2.14
Corrosion Tests of Flame-Sprayed Coated Steel 19-Year Report
1974
AWS
C5.1
Recommended Practices for Plasma-Arc Welding
1973
AWS
WZC
Welding Zinc-Coated Steel First Edition
1972
AWS
C1.3
Recommended Practices for Resistance Welding Coated Low Carbon Steels R(1987)
1970
AWS
C2.2
Recommended Practices for Metallizing with Aluminium and Zinc for Protection of Iron and Steel
1967
AWS
D1.0
Welding in Building Construction Eighth Edition; Supplement 2: September 1968
1966
AWS
C2.8
(Cancelled)Corrosion Tests of Metallized Coated Steel 6-Year Report Best Copy Available
1962
AWS
C1.2
Recommended Practices for Spot Welding Aluminium and Aluminium Alloys
1953
AWS
D10.10
NULL
0
AWS
D10.10M 1999

(R 200

C4.6M 2006(R
NULL
0
AWS
2012)

خرید پکیج استاندارد AWS سال 2020

برای دانلود مجموعه کامل استاندارد AWS و دریافت پی دی اف کلیه شماره های استاندارد AWS بر روی کلید خرید در انتهای صفحه کلیک کنید. پس از اتصال به درگاه پرداخت و تکمیل مراحل خرید، لینکهای دانلود ایمیل می شود. استاندارد انجمن جوشکاری آمریکا تا مارچ سال 2020 بروزرسانی شده است.کلیه فایلها در فرمت PDF ارسال می شود. توجه شود که این پکیج تنها شامل فایلهای اعلام شده در پایین است.فایلهای aws شامل سالهای 2020 و استانداردهای aws سال 2019 و 2018 می باشد. تنها همین فایلها با قیمت اعلامی ارسال می شود. در صورتی که نیاز دارید فایلهای aws را از ابتدا یعنی سال 1980 تا انتهای سال 2020 دریافت کنید با ما مکاتبه کنید.

در صورتی که نیاز به دانلود هر استانداردی از IHS و یا techstreet دارید، فقط کافیست ادرس اینترنتی استاندارد را از سایت http://techstreet.com  و یا https://global.ihs.com برای ما ارسال کنید (راههای ارتباطی در صفحه تماس با گیگاپیپر ). پس از بررسی، هزینه ان اعلام می شود. پس از واریز نسخه الکترونیکی ارسال می شود.

معرفی استاندارد aws

AMERICAN WELDING SOCIETY

As a leader in welding education and technology development, AWS promotes best practices and works to advance the science and application of welding and allied processes such as joining, brazing, soldering, cutting, and thermal spray.

 

For Download Please Contact Us :

Price : 55$

لیست مجموعه استاندارد AWS

با کلیک بر روی خرید، در انتهای این صفحه تنها استانداردهای زیر مطابق تاریخ اعلامی برایتان بلافاصله ایمیل می شود.

استانداردهای AWS سال 2020 پکیج

AWS J1.3-J1.3M
2020
SPECIFICATION FOR MATERIALS USED IN RESISTANCE WELDING ELECTRODES AND TOOLING – FIRST EDITION

AWS A3.0M-A3.0
2020
STANDARD WELDING TERMS AND DEFINITIONS INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING – 13TH EDITION

استانداردهای انجمن جوشکاری آمریکا سال 2019 از پکیج

AWS C3.2M-C3.2
2019
STANDARD METHOD FOR EVALUATING THE STRENGTH OF BRAZED JOINTS – FIFTH EDITION

AWS B2.1-1-205
2019
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, E6010 (VERTICAL UPHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), IN THE AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE APPLICATIONS – 3RD EDITION

AWS B2.1-1-204
2019
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 3/4 INCH [19 MM] THICK, E6010 (VERTICAL DOWNHILL ROOT WITH THE BALANCE VERTICAL UPHILL), IN THE AS-WELDED CONDITION, PRIMARILY PIPE APPLICATIONS – 3RD EDITION

AWS B2.1-1-206
2019
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, E6010 (VERTICAL DOWNHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), IN THE AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE APPLICATIONS – 3RD EDITION

AWS B2.1-1-202
2019
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 3/4 INCH [19 MM] THICK, E6010 (VERTICAL DOWNHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), IN THE AS-WELDED CONDITION, PRIMARILY PIPE APPLICATIONS – 3RD EDITION

AWS B2.1-1-203
2019
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 3/4 INCH [19 MM] THICK, E6010 (VERTICAL UPHILL), IN THE AS-WELDED CONDITION, PRIMARILY PIPE APPLICATIONS – 3RD EDITION

AWS B2.1-1-201
2019
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 3/4 INCH [19 MM] THICK, E6010 (VERTICAL UPHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), IN THE AS-WELDED CONDITION, PRIMARILY PIPE APPLICATIONS – 3RD EDITION

AWS B2.1-1-207
2019
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, ER70S-2, IN THE AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE APPLICATIONS – 3RD EDITION

AWS B2.1-1-208
2019
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, E7018, IN THE AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE APPLICATIONS – 3RD EDITION

AWS B2.1-1-209
2019
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, ER70S-2 AND E7018, IN THE AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE APPLICATIONS – 3RD EDITION

AWS A5.8M-A5.8
2019
SPECIFICATION FOR FILLER METALS FOR BRAZING AND BRAZE WELDING – 11TH EDITION

AWS D20.1-D20.1M
2019
SPECIFICATION FOR FABRICATION OF METAL COMPONENTS USING ADDITIVE MANUFACTURING

AWS D14.3-D14.3M
2019
SPECIFICATION FOR WELDING EARTHMOVING, CONSTRUCTION AND AGRICULTURAL, AND GROUND-BASED MATERIAL HANDLING EQUIPMENT

AWS D15.1-D15.1M
2019
RAILROAD WELDING SPECIFICATION FOR CARS AND LOCOMOTIVES

AWS D3.9-D3.9M
2019
SPECIFICATION FOR CLASSIFICATION OF WELD-THROUGH PAINT PRIMERS

AWS C1.5
2019
SPECIFICATION FOR THE QUALIFICATION OF RESISTANCE WELDING TECHNICIANS

AWS A5.01M-A5.01
2019
WELDING AND BRAZING CONSUMABLES – PROCUREMENT OF FILLER METALS AND FLUXES (ISO 14344:2010 MOD)

AWS D1.5M-D1.5
2019
BRIDGE WELDING CODE – 7TH EDITION; INTERIM REVISION

AWS D17.2-D17.2M
2019
SPECIFICATION FOR RESISTANCE WELDING FOR AEROSPACE APPLICATIONS – 3RD EDITION

مجموعه فایلهای انجمن جوش آمریکا (AWS) سال 2018 پکیج

AWS D16.6M-D16.6
2018
SPECIFICATION FOR ROBOT ARC WELDING TRAINING AND TESTING CELL – 1ST EDITION

AWS B2.1-1-315
2018
STANDARD WELDING PROCEDURE SPECIFICATION FOR NAVAL APPLICATIONS (SWPS-N) FOR GAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERT ROOT FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (S-1), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, MIL-MS-1 MIL-70S-2, AND MIL-7018-M IN THE AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE FOR NAVAL APPLICATIONS – 1ST EDITION

AWS B2.1-1-314
2018
STANDARD WELDING PROCEDURE SPECIFICATION FOR NAVAL APPLICATIONS (SWPS-N) FOR GAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERT ROOT OF CARBON STEEL (S-1), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, MIL-MS-1 AND MIL-70S-2, IN THE AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE FOR NAVAL APPLICATIONS – 1ST EDITION

AWS B2.1-1-027
2018
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SELF-SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL (M-1 OR P-1, GROUPS 1 AND 2), 1/8 INCH [3 MM] THROUGH 1/2 INCH [13 MM] THICK, E71T-11, IN THE AS-WELDED CONDITION, PRIMARILY PLATE AND STRUCTURAL APPLICATIONS – 4TH EDITION

AWS A5.11-A5.11M
2018
SPECIFICATION FOR NICKEL AND NICKEL-ALLOY WELDING ELECTRODES FOR SHIELDED METAL ARC WELDING – 11TH EDITION

AWS B2.1-8-322
2018
STANDARD WELDING PROCEDURE SPECIFICATION FOR NAVAL APPLICATIONS (SWPS-N) FOR GAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERT ROOT FOLLOWED BY SHIELDED METAL ARC WELDING OF AUSTENITIC STAINLESS STEEL (S-8), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, MIL-3XX AND MIL-3XX-XX, IN THE AS-WELDED CONDITION, PRIMARILY PIPE FOR NAVAL APPLICATIONS – 1ST EDITION

AWS B2.1-8-321
2018
STANDARD WELDING PROCEDURE SPECIFICATION FOR NAVAL APPLICATIONS (SWPS-N) FOR GAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERT ROOT OF AUSTENITIC STAINLESS STEEL (S-8), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, MIL-3XX, IN THE AS-WELDED CONDITION, PRIMARILY PIPE FOR NAVAL APPLICATIONS – 1ST EDITION

AWS B2.1-1-017
2018
STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2) 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, E6010, IN THE AS-WELDED OR PWHT CONDITION, PRIMARILY PLATE AND STRUCTURAL APPLICATIONS – 2ND EDITION