برچسب: استاندارد BSI

  • دانلود استانداردهای جدید 2020

    دانلود استانداردهای جدید 2020

    برای خرید جدیدترین استانداردهای سال 2020 ، از هر یک از ناشران زیر با ما مکاتبه کنید.

    خرید استاندارد بصورت تکی

    در صورتی که شماره استاندارد خاصی را نیاز دارید، کافیست شماره و عنوان استاندارد مورد نظر را به تلگرام، واتس اپ و یا ایمیل ما ارسال کنید تا پس از اعلام و واریز هزینه ، فایل PDF ان ارسال شود.

    در صورتی که شماره استاندارد مورد نظر را نمی دانید می توانید از سایت https://www.techstreet.com کمک بگیرید.

    دانلود استاندارد بصورت پکیج کامل

    می توانید کل استانداردهای هر یک از ناشران را از سال 1980 تا سال 2020 بصورت کامل و در قالب فایل zip دریافت کنید. در صورتی که بیشتر از 50 تا صد فایل استاندارد از هر یک از ناشران نیاز دارید، راهکار مناسبتر استفاده از پکیج است.

    AHRI -Air Conditioning, Heating & Refrigeration Institute
    The Aluminum Association
    AASHTO – American Association of State Highway & Transportation Officials
    ACI – American Concrete Institute
    AGMA – American Gear Manufacturers Association
    AISI – American Iron & Steel Institute
    ANSI – American National Standards Institute
    API – American Petroleum Institute
    ASTM – American Society for Testing and Materials
    ASHRAE – American Society of Heating, Refrigeration & Air-Conditioning Engineers
    ASME – American Society for Mechanical Engineers
    AWWA – American Water Works Association
    AWS – American Welding Society
    AIST – Association for Iron & Steel Technology
    BISSC – Baking Industry Sanitation Standards Committee
    BSI – British Standards Institution
    CSA – Canadian Standards Association
    CEN – European Committee for Standarization
    DIN – German Institute of Standardization (Deutsches Institut fur Normung)
    EEI – Edison Electric Institute
    The Energy Institute (UK)
    ECMA – European Compter Manufacturer Association
    GSA – U.S. General Service Administration
    HEI – Heat Exchange Institute
    The Hydraulic Institute
    IFI – Industrial Fasteners Institute
    IEC – International Electrotechnical Commission
    IEEE – Institute of Electrical and Electronics Engineers
    IMSA – International Municipal Signal Association
    The Marble Institute of America
    MPIF – Metal Powder Industries Federation
    NEMA – National Electrical Manufacturers Association
    NISO – National Information Standards Organization
    NIST – National Institute of Standards and Technology
    SAE – Society of Automotive Engineers
    TAPPI – Technical Association of the Pulp and Paper Industry
    UL – Underwriters Laboratories
    UTE – Union Technique de l’Electricite
    USBR – U.S. Bureau of Reclamation
  • دانلود استانداردهای پلیمر و پلی اتیلن

    دانلود استانداردهای پلیمر و پلی اتیلن

    خرید پکیج استانداردهای پلیمر و پلی اتیلن

    سایت گیگاپیپر به گرداوری کلیه استانداردهای پلیمر و پلی اتیلن در این زمینه پرداخته است. فایلهای استاندارد پلاستیک، پلیمر و پلی اتیلن  بصورت پکیج کامل بفروش می رسد. همچنین این امکان فراهم است که شماره استاندارد مورد نظر را اعلام کنید و جدیدترین ویرایش استاندارد را دریافت کنید. برای خرید تک فایل و یا پکیج کامل با ما مکاتبه کنید.

    امید است این استانداردها مورد توجه متخصصان و علاقه مندان این صنعت قرار بگیرد و ما همیشه سعی داریم این لیست را بروز و غنی‌تر نمائیم و در صورت نیاز داشتن به استانداردی که در لیست استانداردهای زیر نباشد لطفا نام و شماره استاندارد را برای ما به آدرس ایمیل ما ارسال نمائید و یا در بخش نظرات آنرا بیان نمائید تا در دستور کار قرار بگیرد.

    لیست استانداردهای جدید پلیمر و پلی اتیلن پکیج دوم

    برای دریافت این پکیج استاندارد با کد پکیج 917917 با ما مکاتبه کنید.

    1. ISO 9080: 2003, Plastic piping and ducting systems – Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
    2. ISO/TR 9080: 1992, Thermoplastics pipes for the transport fluids – Methods of Extrapolation of hydrostatic stress rapture data to determine the long-term hydrostatic strength of thermoplastics pipe materials
    3. ISO 4894-1, Plastics – Styrene/Acrylonitrile (SAN) moulding and extrusion materials
    4. ISO 19064, Plastics — Styrene/acrylonitrile (SAN) moulding and extrusion materials
    5.  ISO 1622-2, Plastics – Polystyrene (PS) moulding and extrusion materials
    6.  ISO 17855-1 & 2, Plastics – Polyethylene (PE) moulding and extrusion materials
    7. ISO 2897-2, Plastics – Impact-resistant Polystyrene (PS-I) moulding and extrusion materials
    8. ISO 19063, Plastics – Impact-resistant Polystyrene (PS-I) moulding and extrusion materials
    9. ISO 4613-1 & 2, Plastics – Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials
    10.  ISO 6402-2, Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylenediene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials
    11. ISO 19065-1, Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylenediene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials
    12.  ISO 19062-1, Plastics – Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials
    13. ISO 7391-1, Polycarbonate (PC) moulding and extrusion materials
    14.  ISO 29988-1 & 2, Plastics – Polyoxymethylene (POM) moulding and extrusion materials
    15.  ISO 10366-2, Plastics – Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials
    16.  ISO 294-1 to 5, Plastics – Injection moulding of test specimens of thermoplastic materials
    17.  ISO 11173, Thermoplastics pipes – Determination of resistance to external blows – Staircase method

    ناشران استانداردهای پلیمر و پلی اتیلن

    استانداردهای پلی اتیلن و دیگر پلیمرها را با توجه به سازمان منتشر کننده استاندارد تقسیم بندی نموده ایم و کاربردهای هرکدام از استانداردها را در چند کلمه بیان کردیم.

    استانداردهای ISO
    استانداردهای ASTM
    استانداردهای AWWA
    استانداردهای BS
    استانداردهای DIN
    استانداردهای ISIRI

    استانداردهای ISO پلیمر و پلی اتیلن

    استانداردهای ایزو و کیفیت

    اینکه با چه ابزار و با چه نظام و قاعده ای میتوان کیفیت محصول و خدمات را تضمین کرد همگی در استانداردهای تضمین کیفیت پنهان است. سازمان بین المللی استاندارد برای رفع نیاز شرکتها، استانداردهای مختلفی را تعریف کرده است که از جمله معروفترین آنها ایزو 9000 بوده و موج آن تعداد زیادی شرکتها ایرانی را فرا گرفته است. البته لازم به ذکر است که استاندارد ایزو با استاندارهای تضمین کیفیت معنای متفاوتی را دارد ولی  در ایران همچنان بسیاری از مردم و مدیران این دو استاندارد را با هم اشتباه میگیرند.

    تفاوت استانداردهای « تضمین کیفیت » با استانداردهای « کیفیت محصول » بر میگردد به دید کلی ما به کیفیت شرکت و محصول مورد نظرمان. معمولا منظور از استانداردهای محصول حداقل مشخصه های فنی لازم برای کیفیت مورد درخواست است . درحالیکه استانداردهای تضمین کیفیت حداقل الزامات کیفی لازم در همه ابعاد شرکت و فرایندهای آن را نشان می دهند. مثلا استاندارد محصول مشخصه های محصول مورد نظر ما را از نظر ، استحکام ، دوام و … تعیین میکند تا حداقل کیفیت قابل قبول را داشته باشد. اما استاندارد تضمین کیفیت تنها بر عوامل تاثیرگذار بر کیفیت  که میباید از طریق فرآیندهای مختلف مثل تولید ، طراحی و خرید انجام میگیرد، تاکید میکند.

    لیست استانداردهای ایزو پلیمر

    سایت گیگاپیپر به گرداوری کلیه استانداردهای پلیمر و پلی اتیلن  در این زمینه پرداخته است

    ISO 4427 : Polyethylene (PE) pipes for water supply – specifications
    ISO 4427-1 :Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General
    ISO 4427-1 :Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General TECHNICAL CORRIGENDUM 1
    ISO 4427-2 :Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes
    ISO 4427-3 : Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings
    ISO 4437 : Buried polyethylene (PE) pipes for the supply of gaseous fuels- Metric series – specifications
    ISO 442-2 : Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2:Pipes
    ISO 1969 : Fibre Ropes – polyethylene – 3- and 4 strand ropes
    ISO 2268 : Surface active agents (non Ionic) -Determination of polyethylene glycols and non ionic active matter (Adducts)-Weibull method
    ISO 3458 : Assembled joints between fittings and polyethylene (PE) Pressure pipes – test of leakproofness under internal pressure
    ISO 3459 : Polyethylene (PE) Pressure pipes – joints assembled with mechanical fitting- Internal under-Pressure test method and requirment
    ISO 3501 : Assembled joints between fittings and polyethylene )PE) pressure pipes- Test of resistance to pull out
    ISO 3503 : Assembled joints between fittings and polyethylene (PE) pressure pipes-Test of leakproofness under internal pressure when subjected to bending
    ISO 3633 : UPVC pipes and fittings for soil and wasfe discharge (low and hightemperature) Systems inside buildings – Specifications
    ISO 3663 : Polyethylene (PE) pressure pipes and fittings, metric series – Dimensions of flanges
    ISO 4059 : polyethylene (PE) pipes – pressure drop in Mechanical pipe-jointing systems – method of test and requirments
    ISO 6402-2 : Plastics -Acrylonitrile styrene acrylate (ASA), acrylonitrile (ethylene propylene diene) styrene (AEPDS) and acrylonitrile (Chlorinated polyethylene) styrene (ACS) moulding and extrusion materials , Part 2: Preparation of test speciments and detemination of properties
    ISO 7214 : Cellular Plastics – Polyethylene – Methods of test
    ISO 8005-3 : Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels – metric series – Specifications , Part 3: Electrofusion fittings
    ISO 8180 : Ductile iron pipes – polyethylene sleeving
    ISO 8283-2 : Plastics pipes and fittings – Dimensions of sockets and spigots for discharge systems inside buildings , Part 2: Polyethylene
    ISO 8770 : Plastics piping systems for soil and waste discharge (Low and high temperature) inside buildings – Polyethylene
    ISO 8772 : High density Polyethylene (HDPE) pipes and fittings for buried drainage and sewerage systems -Specifications
    ISO 8796 : Polyethylene PE 32 and PE 40 pipes for irrigation laterals — Susceptibility to environmental stress cracking induced by insert-type fittings — Test method and requirements
    ISO 9625:Mechinal Joint fittings for use eith polyethylene pressure pipes for irrigation purposes
    ISO 10933 : Polyethylene (PE) valves for gas distribution systems
    ISO 11413 : Plastics pipe and fittings – preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
    ISO 11414 : Plastics pipes and fittings – preparation of polyethylene (PE) pipe / pipe or pipe/fitting test piece assemblies by butt fusion
    ISO 13460 : Agricultural irrigation equipment – plastics saddles for polyethylene pressure pipes
    ISO 13480 : polyethylene pipes – resistance to slow crack growth – Cone test method
    ISO 13761 : Plastics pipes and fittings – pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 C
    ISO 13954 : Plastics pipes and fittings – peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
    ISO 13955 : Plastics pipes and fittings – crushing decohesion test for polyethylene (PE) electro fusion assemblies
    ISO 13957 : Plastics pipes and fittings – polyethylene (PE) tapping tees – Test method for impact resistance
    ISO 14236 : Plastics pipes and fittings – mechanical joint compression fittings for use with polyethylene pressure pipes in water supply systems
    ISO 14531 – 2 : Plastics pipes and fittings – Crosslinked polyethylene (PEX) pipe systems for the conveyance of gaseous fuels – Metric series- Specifications , Part2 : Fittings fir heat fusion jointing
    ISO 15875-1 : Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PEX) ,Part 1: General
    ISO 15875-2 : Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PEX) ,Part 2: Pipes
    ISO 15875-3 : Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PEX) ,Part 3: Fittings
    ISO 15875-5 : Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PEX) ,Part 5: Fitness for purpose of the system
    ISO 16241 : Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products-PENT
    ISO 161-1 : Thermoplastics pipes for the conveyance of fluids – Nominal outside diameters and nominal pressures , Part 1:Metric Series
    ISO 264 :Unplasticized Polyvinyl chloride (PVC) Fittings With plain Sockets for pipes under pressure -laying length-Metric series
    ISO 727 : Fittings of unplasticized polyvinyl chloride (UPVC),chlorinated polyvinyl chloride (CPVC) or acrylonitrile/butadiene/styrene (ABS) with plain socjets for pipes under pressure – Dimensions of sockets – Metric series
    ISO 727-1 : Fittings made from unplasticized poly(vinyl chloride)(UPVC), chlorinated poly vinyl chloride (CPVC) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure, Part 1: Metric Series
    ISO 727-2 : Fittings made from unplasticized poly(vinyl chloride)(UPVC), chlorinated poly vinyl chloride (CPVC) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure, Part 2: Inch Based series
    ISO 1167 : Thermoplastics pipes for the conveyance of fluids-Resistance to internal pressure – test method
    ISO 1167-1 :Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method
    ISO 1167-2 : Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
    ISO 3663 : Polyethylene (PE) Pressure pipes and fittings, Metric series , Dimensions of flanges
    ISO 4433-1: Thermoplastics Pipes – Resistance to liquid chemicals – Classification , Part 1 : Immersion test method
    ISO 4433-2: Thermoplastics Pipes – Resistance to liquid chemicals – Classification , Part 2 : Polyolefin pipes
    ISO 4433-3: Thermoplastics Pipes – Resistance to liquid chemicals – Classification , Part 3 : Upvc,Hi-PVC , CPVC
    ISO 4433-4: Thermoplastics Pipes – Resistance to liquid chemicals – Classification , Part 4 : poly (vinylidene fluoride)(PVDF) pipes
    ISO 4433-COR1: Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications ,TECHNICAL CORRIGENDUM 1
    ISO 9080 : Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
    ISO 9623 : PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure – Design lengths and size of threads- Metric Series
    ISO 9624 : Thermoplastics pipes for fluids under pressure-Mating dimensions of flange adapters and loose backing flanges
    ISO 12162 : Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient
    ISO 12167-1 : Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
    ISO 12167-2 : Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
    ISO 12167-3 : Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3:Operator`s badge
    ISO 12167-4 : Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 4:Traceability coding
    ISO 13477 : Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)
    ISO 13478 : thermoplastics pipes for the conveyance of fluids Determination of resistance to rapid crack propagation (RCP) – Full scale test
    ISO 13479 : Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes
    ISO 13480 : Polyethylene pipes – resistance to slow crack growth-Cone test method
    ISO 13761 : Plastics pipes and fittings – pressure reduction factors for polyethylene pipeline systeme for use at temperatures above 20 C
    ISO 14236 : Plastics pipes and fittings — Mechanicaljoint compression fittings for use with polyethylene pressure pipes in water supply systems
    ISO 10358 – TR : Plastic pipes and fittings-Combined chemical-resistance classification table
    ISO 10837 – TR : Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings
    ISO 11295 – TR : techniques for rehabilitation of pipeline systems by the use of plastics pipes and fittings
    ISO 11647 – TR : Fusion Compatibility of polyethylene (PE) pipe and fittings
    ISO 13950 – TR : Plastics Pipes and fittings – Automatic recognition systems for electrofusion

    استانداردهای ASTM پلیمر و پلی اتیلن

    انجمن مواد و آزمون آمریکا (American Society for Testing and Materials) که به اختصار آنرا ASTM مینامند یکی از بزرگ‌ترین سازمان‌های بین‌المللی توسعه‌دهندهٔ استاندارد است.

    استانداردهای گسترده ASTM که شامل استانداردهای فنی برای مواد، محصولات، سامانه‌ها و خدمات است، بر اساس اجماع (توافق اعضا) به تصویب می‌رسد. ASTM دارای ۳۰٬۰۰۰ عضو از ۱۲۰ کشور جهان می‌باشد.

    ASTM يک عملکرد کنترلي بين توسعه دهندگان استاندارد در آمريکا دارد و اين ادعا را دارد که بزرگترن ارگان توسعه دهنده ي استاندارد در جهان است.

    بر اساس توافق نامه اي ، ASTM هزاران کميته ي فني داوطلب را پشتيباني مي کند، که اين کميته ها اعضاي خود را در سر تا سر جهان جهت دهي کرده که جمعاً بيش از دوازده هزار استاندارد را ايجاد و تعيين کرده اند.

    ASTM بر خلاف سایر موسسه‌های استاندارد، نظیر BSI، DIN و AFNOR سازمانی دولتی نیست. در ایالات متحده آمریکا، مؤسسه ملی استاندارد آمریکا وظایف یک موسسه استاندارد ملی را بر عهده دارد.

    ASTM دارای بیش از ۱۲٬۰۰۰ استاندارد است که در ۷۷ جلد به صورت سالیانه چاپ و منتشر می‌شود.

    دانلود استانداردهای ASTM پلیمر و پلی اتیلن

    ASTM D2122-2004 : Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
    ASTM D2122-2004-2 : Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
    ASTM D2122-2004-3 : Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
    ASTM D2412-2008 : Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
    ASTM D2412-2008-2 : Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
    ASTM D2412-2008-3 : Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
    ASTM D2657-2007 : Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
    ASTM D2657-2007-2 : Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
    ASTM D2657-2007-3 : Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
    ASTM D3350-2008 : Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    ASTM D3350-2008-2 : Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    ASTM D3350-2008-3 : Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    ASTM F412-2009 : Standard Terminology Relating to Plastic Piping Systems
    ASTM F412-2009-2 : Standard Terminology Relating to Plastic Piping Systems
    ASTM F412-2009-3 : Standard Terminology Relating to Plastic Piping Systems
    ASTM F477-2008- Part 1 : Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
    ASTM F477-2008- Part 2 : Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
    ASTM F477-2008- Part 3 : Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
    ASTM F1759-2004-Part 1 : Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications1
    ASTM F1759-2004-Part 2 : Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications1
    ASTM F1759-2004-Part 3 : Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications1
    ASTM_D_2122_(2010) : Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
    ASTM_D_2466_(2013) : Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
    ASTM_D1598_(2009) : Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
    ASTM_D1784_(2011) : Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
    ASTM_D1785_(2012) : Standard Specification for Poly Vinyl Chloride (PVC) Plastic Pipe, Schedules 40, 80, and 120
    ASTM_D2241_(2009) : Standard Specification for Poly Vinyl Chloride (PVC) Pressure-Rated Pipe (SDR Series)
    ASTM_D2467_(2013) : Standard Specification for Poly Vinyl Chloride (PVC) Plastic Pipe Fittings, Schedule 80
    ASTM_D2564_(2012) : Standard Specification for Solvent Cements for Poly Vinyl Chloride (PVC) Plastic Piping Systems
    ASTM_D2729_(2011) : Standard Specification for Poly Vinyl Chloride (PVC) Sewer Pipe and Fittings
    ASTM_F_789_REV_A(1995) : Standard Specification for Type-46 and type-115 Poly(Vinyl Chloride) (PVC) Plastic Gravity flow Sewer pipe and Fittings
    ASTM_F679_(2013) : Standard Specification for Poly Vinyl Chloride (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings

    استانداردهای AWWA

    استاندارد AWWA  مخفف عبارت American Water Work Association میباشد.، استاندارد انجمن امور کار و آب آمریکا یک موسسه غیر انتفایی است که در سال 1881 تاسیس گردید . این انجمن در واقع مهمترین منبع در جهان محسوب میشود ، AWWA  با حدود 50 هزار عضو و با هدف بهبود بهداشت عمومی، حفاظت از محیط زیست، تقویت اقتصاد و افزایش کیفیت زندگی ما فعالیت میکند .

    تعدادی از استاندارهای AWWA  در خصوص لوله پلی اتیلن و لوله GRP  میباشد که از جامعترین استانداردها در این زمینه میباشد ، و مباحث کاملی را در خصوص روشهای تولید، حمل ، نصب و تستهای کنترل کیفی لوله پلی اتیلن و لوله های GRP است . علاوه بر این استاندارهای در رابطه با لوله های فایبر گلاس و کاربردهای آن معرفی شده است.

    این استانداردها که با صنعت پلیمر و پلی اتیلن در ارتباط است در اینجا گرداوری شده است .

    AWWA ANSI C 900 (2007) : Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 4 In. Through 12 In. (100 mm Through 300 mm), for Water Transmission and Distribution
    AWWA C905 (2010) : Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 14 In. Through 48 In. – 350 mm Through 1,200 mm
    AWWA M23 (2002) : PVC Pipe – Design and instalation

    استانداردهای BSI

     استاندارد BS مخفف واژه ی British Standard بودهو زمان تاسیس آن به سال 1987 همزمان با تاسیس موسسه Commercial Computer Security Center

    و بخش UK Department of Trade and Industry که با نام مخفف DIT  شناخته شده است ، برمیگردد. این مرکز با هدف تعریف معیارهایی بین المللی برای ارزیابی میزان امنیت تجهیزات تولیدشده توسط سازندگان تجهیزات امنیتی و ارائه تاییدیه های مربوطه و همچنین به منظور كمك به كاربران در سال 1989 با نشر کدهایی که برای سنجش امنیت تعیین گردیده بودشروع به کار کرد ، این کدها با نام Users Code of Practice  معروف هستند که در مرکز CCSC  تنظیم ومنتشر گردیده اند. سایت گیگاپیپر به گرداوری استانداردهای BSI مرتبط با صنعت پلیمر و پلی اتیلن پرداخته است . همچنین استانداردهای BS مرتبط به لوله پلی اتیلن را میتوانید سفارش و دانلود کنید.

    دانلود استانداردهای BSI
     

     EN ISO 1872-1 : Plastics – polyethylene (PE) moulding and extrusion materials , Part 1 : designation system and basis for specifications
    BS EN ISO 1872-2 : Plastics – polyethylene (PE) moulding and extrusion materials ,Part 1 : Preparation of test specimens and determinion of properties
    BS EN ISO 9001-2000 : Quality management systems – requirements
    BS EN ISO 9001-2004 : quality systems – model for quality assurance in design,development, production,instalation and servicing
    BS EN ISO 11542-1 : Plastics-Ultra high molecular weight polyethylene (PE-UHMW) moulding and extrusion materials , Part 1: Designation system and basis for specifications
    BS EN ISO 11542-2 : Plastics-Ultra high molecular weight polyethylene (PE-UHMW) moulding and extrusion materials , Part 1: Preparation of test specimens and determination of properties
    BS EN ISO 14632 : Extrudede sheets of polyethylene (PE-HD) – requirements and test Methods
    BS EN ISO 15494 : Plastics piping systems for industrial applications – polybutene (PB), Polyethylene (PE) and polypropylene (PP) – Specifications for components and the system – Metric Series
    BS ISO 5834-1 : Implants for surgery ultra high molecular weight polyethylene
    Part 1 : Powder form
    BS ISO 5834-2 : Implants for surgery ultra high molecular weight polyethylene
    Part 1 : Moulded forms
    BS ISO 8085-2 : Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels – Metrics Series – Specifications, Part 2 : Spigot fittings for butt fusion,for sochet fusion using heated tools and for use with electrofusion fittings
    BS ISO 10838-1 : Mechanical Fittings for polyethylene piping systems for the supply of gaseous fuels, Part 1 : Metal fittings for pipes of nominal outside diameter less than or equal to 63mm
    BS ISO 10838-2 : Mechanical Fittings for polyethylene piping systems for the supply of gaseous fuels, Part 2 : Metal Fittings for pipes of nominal outside diameter greater than 63mm
    BS ISO 10838-3 : Mechanical Fittings for polyethylene piping systems for the supply of gaseous fuels
    Part 3 :Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63mm
    BS ISO 13953 : Polyethylene (PE) pipes and fittings – Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
    BS ISO 14531-1 : Plastics pipes and fittings – Crossllinked polyethylene (PE-X) Pipe systems for the conveyance of gaseous fuels – Metric series – Specifications, Part 1 : Pipes
    BS ISO 14616 : Plastics – Heatshrinkable films of polethylene, ethylene copolymers and their ,mixtures – Determination of the shrinkage stress and contraction stress
    BS 2494 (1990) : Specification for Elastometric seals for joints in pipework and pipelines
    BS 3505 (1986) : Unplasticized polyvinyl chloride (PVC-U) – Pressure pipes for cold potable water
    BS 3506 (1969) : Specification for unplasticized PVC (PVC-U) Pipe for Industrial uses
    BS 3867 (1987) : Outside diameters snd pressure ratings for pipe of thermoplastics materials – inch series
    BS 5481 (1977) : Unplasticized PVC pipe and fittings for gravity sewers
    BS EN 1555-1 (2010) : Plastics piping systems for the supply of gaseous fuels — Polyethylene – PE, Part 1 : General
    BS EN 1555-2 (2010) : Plastics piping systems for the supply of gaseous fuels — Polyethylene – PE  , Part 2 : Pipes
    BS EN 1555-3 (2008) : Plastics piping systems for the supply of gaseous fuels – Polyethylene – PE  , Part 3 : Fittings
    BS EN 1555-4 (2011) : Plastics piping systems for the supply of gaseous fuels — Polyethylene – PE  ,Part 4 : Valves
    BS EN 1555-5 (2008) : Plastics piping systems for the supply of gaseous fuels – Polyethylene – PE, Part 5 : Fitness for purpose of the system
    BS EN 3506 (2001) : Hot rolled sheets and plates in heat resisting alloys — Thickness 2,0 mm a 100mm — Dimensions
    BS EN 3867 (2004) : Pipe couplings, loose flanges and seals — Flanges in titanium alloy TI-P64001
    BS EN 4346 (2007) : Aerospace series — Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) — Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D u 300 mm
    BS EN ISO 3506-1 (2009) : Mechanical properties of corrosion-resistant stainless steel fasteners , Part 1 : Bolts, screws and studs
    BS EN ISO 3506-2 (2009) : Mechanical pro erties of corrosion-restistant stainless steel fasteners ,Part 2 : Nuts
    BS EN ISO 3506-3 (2009) : Mechanical properties of corrosion-resistant stainless steel fasteners ,Part 3 : screws and similar fasteners not under tensile stress
    BS EN ISO 3506-4 (2008) : Mechanical properties of corrosion-resistant stainless steel fasteners – , Part 4 : Tapping screws – ISO/DIS 3506-4:2008
    BS EN ISO 9080 (2012) : Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
    BS ISO 727-1 (2002) : Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/ styrene (ABS) with plain sockets for pipes under pressure, part 1 : Metric series
    BS ISO 727-2 (2005) : Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/ styrene (ABS) with plain sockets for pipes under pressure , Part 2 : Inch-based series
      BS ISO 3867 (2001) : Composition cork expansion joint fillers test methods
    BS ISO 4427-1 (2007) : Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply , Part 1 : General
    BS ISO 4427-2 (2007) : Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply , Part 2 : Pipes
    BS ISO 4427-3 (2007) : Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply , Part 2: Fittings
    BS ISO 4437 (2007) : Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series —Specifications
    BS ISO 4660 (2011) : Rubber, raw natural — Colour index test
    BS PREN ISO 3506-3 (2008) : Mechanical properties of corrosion-resistant stainless steel fasteners – Part 3: screws and similar fasteners not under tensile stress – ISO/DIS 3506-3:2008

    استانداردهای DIN

    استانداردDIN  مخفف عبارت Deutsches Institut für Normung بوده که در محاوره فارسی به آن ” دی اِن ” است که نام یکی سازمان ملی آلمان است . این موسسه استاندارد که از قدیمی ترین سازمانها میباشد در سال 1917 کار خود را آغاز کرده و در حال حاضر بیش از 30 هزار عنوان استاندارد در زمینه های مختلف تکنولوژی را شامل میشود. همانگونه که گفتیم DIN از جمله استاندارد‌های بین‌المللی مربوط به کشور آلمان می‌باشد که مجموعه‌ای از قوانین و مقررات ساخت, تولید, اندازه‌گیری و تست محصولات تولیدی صنعتی  را شامل میشود. استانداردهای DIN آلمان با توجه به قوانین سخت گیرانه که در زمینه تولید لوله و اتصالات دارد مورد توجه اکثر تولیدکنندگان دنیا قرار گرفته است .

    در اینجا به گرداوری استاندارهای لوله پلی اتیلن و دیگر صنایع پلیمر این موسسه, مرتبط با صنعت پلیمر و پلی اتیلن پرداخته ایم .

     DIN 1187 : Unplasticized Polyvinyl chloride (U-PVC) drainPipes , Dimensions, requirments, testing
    DIN 8074 : Polyethylene (PE) Pipe , Dimensions
    DIN 8075 : Polyethylene (PE) pipes , General Quality requirments and testing
    DIN 8076 : Thermoplastics pressure pipelines , metal compression fittins for polyethylene pipes, General quality requirements ,testing
    DIN 16961 – 1 : Thermoplastics pipes and fittings with profiled outer and smooth inner surfaces Part 1 : Dimensions
    DIN 16961 – 2 : Thermoplastics pipes and fittings with profiled outer and smooth inner surfaces Part 2 : Technical Delivery conditions
    DIN 16963 -1 : Pipe Joints and Elements for HDPE Pressure Pipelines , Types 1 and 2 Pipe Bends of Segmental Construction for Butt-Welding Dimensions
    DIN 16963 – 2 : Pipe Joints assemblies and fittingd for types 1 and 2 HDPE pressure pipes , Tees and Branches produced by segment inserts and necking for butt welding Dimensions
    DIN 16963 – 3: Pipe Joints and elemnts for HDPE Pressure pipelines , Type 1 and 2 Pipe Bends for Butt Welding Dimensions
    DIN 16963 – 4 : Pipe joints assemblies and fittings for HDPE Pressure pipes , Adaptors for fusion jointing, flanges and sealing elemnts Dimensions
    DIN 16963 – 5 : Pipe Fittings and Joints assemblies for PE80 and PE100 Polyethylene pressure pipes , general quality requirments and testing
    DIN 16963 – 6 : Pipe Fittings and Joints assemblies for HDPE Pressure pipes , Injection moulded fittings for butt welding Dimensions
    DIN 16963 – 7 : Pipe joints assemblies and fittings for HDPE pressure pipes , Fittings for resistance welding Dimensions
    DIN 16963 – 9 : Pipe joints and Elemnts for HDPE pressure pipelines , Type 1 and 2 Injection Moulded Tee pieces for Socket-Welding Dimensions
    DIN 16963 – 10 : Pipe joints and Elemnts for HDPE pressure pipelines , Type 1 and 2 Injection Moulded Tee pieces for Socket-Welding Dimensions
    DIN 16963 – 11 : Pipe fittings and joints assemblies for pressure pipes made from type PE 80 and PE 100 Polyethylene , Dimensions of Bushings, flanges and sealing elements, for socket welding
    DIN 16963 – 14 : Pipe Joints assemblies and fittings for types 1 and 2 HDPE pressure pipes , Injection moulded reducers and nipples for socket welding Dimensions
    DIN 16963 – 15 : Pipe Joints assemblies and fittings for HDPE Pressure pipes, pipe couplings , Dimensions
    DIN 19535 – 1 : HDPE Pipes and Fittings for hot water resistant drains and sewers inside buildings, Dimensions
    DIN 19537 – 1 : HDPE Pipes and fittings for drains and sewers , Dimensions
    DIN 19537 – 2 : HDPE Pipes and fittings for drains and sewers , Technical delivery conditions
    DIN 19537 – 3 : Prefabricated HDPE manholes for use in sewerage systems , Dimensions and technical delivery conditions
    DIN 19560 – 10 : Polypropylene (PP) pipes and fittings for hot water resistant wate and soil discharge systems inside buldings , part 10 : fire behavior, quality control and installation
    DIN EN 1329 -1 : Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Unplasticized poly (vinyl chloride) (PVC-U) Part 1: Specifications for pipes, fittings and the system
    DIN EN ISO 1167 – 4 : Thermoplastics pipes, fittings and assemblies for the conveyance of fluids – Determination of the resistance to internal pressure –Part 4: Preparation of assemblies – ISO 1167-4:2007
    DIN 4279 – 7 : Testing of pressure pipelines for water by internal pressure , Pressure pipes made of rigid PVC
    DIN 8061 : Unplasticized polyvinyl chloride (PVC-U) pipes – General quality requirements and testing
    DIN 8062 : Unplasticized polyvinyl chloride (PVC-U) pipes – Dimensions
    DIN 8063 -1 : Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (U-PVC) Pressure pipelines , Dimensions of socket bends
    DIN 8063 – 2 : Pipe joints and pipe Fittings for pipes under pressure made of unplasticized polyvinyl chloride , Bends Made by Injection Moulding for Bonding Dimensions
    DIN 8063 – 4 :Pipe Joint assemblies and fittings for unplasticized polyvinyl chloride (U-PVC) Pressure pipes , Bushings , Flanges , seals , Dimensions
    DIN 8063 – 5 :Pipe fittings and joint assemblies for unplasticized polyvinyl choride (U-PVC) pressure pipes , part 5 : General quality requirements and testing
    DIN 8063 – 11 :Pipe Joints and pipe fittings for pipes under pressure made of Unplasticized Polyvinyl Chloride (Rigid PVC) , Sockets Wiyh Primary Element of Copper-Zink Alloy (Brass) for Bonding,Dimensions
    DIN 8063- 12 :Pipe Joint assemblies and fittings for unplasticized polyvinyl chloride (U-PVC) pressure pipelines , Dimensions of Flanged and socket Fittings
    DIN 16874 : High density polyethylene (HDPE) Pipes and Fittings for Cable ducting , Dimensions and technical delivery conditions
    DIN 16970 : Adhesives for Bonding pipes and pipe system elemnts of PVC General quality requirements and testings
    DIN 19531-10 : U-PVC Pipes and Fittings for drainage systems inside buildings , Part 10 : Fire behaviour, quality control and installation
    DIN EN 921 : Thermoplastics pipes , determination of resistance to internal pressure at constant temperature
    DIN EN 1555 – 5 : Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Part 5: Fitness for purpose of the system
    DIN EN ISO 8062 – 3 : Geometrical Product Specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings – ISO 8062-3:2007
  • دانلود استاندارد bsi

    دانلود استاندارد bsi

    دانلود استاندارد bsi

    برای خرید کلیه استانداردهای BSI ، کافیست مشخصات استانداردهای مورد نیاز را برای ما ارسال کنید (یکی از راههای ارتباطی در لینک تماس با گیگاپیپر). هزینه استاندارد BSI به شما اطلاع داده می شود. پس از واریز لینک دانلود استاندارد BSI ارسال می شود.

    موسسه استانداردهای انگلیس ||| British Standards Institute — BSI

    موسسه استانداردهای انگلستان (British Standards Institute) یا به اختصار BSI، بزرگترین مرجع تدوین استانداردهای انگلستان می باشد.

    دانلود استاندارد bsi خرید کلیه استانداردهای BSI: (موسسه استانداردهای انگلیس) British Standards Institute | دریافت استاندارد BS EN | استانداردهای رایگان BS گیگاپیپر
    دانلود استاندارد bsi خرید کلیه استانداردهای BSI: (موسسه استانداردهای انگلیس) British Standards Institute | دریافت استاندارد BS EN | استانداردهای رایگان BS

    نحوه درخواست دانلود استاندارد BSI

    لطفا مشخصات استاندارد BSI خود را با به ایمیل سایت ارسال بفرمایید و یا فرم درخواست استاندارد BSI را در انتهای صفحه پر کنید.

    BSI: (موسسه استانداردهای انگلیس) British Standards Institute

    دانلود رایگان استاندارد BSI

    در صورت سفارش 5 استاندارد BSI، درخواست 6 ام استاندارد BSI رایگان ارسال می شود.

    برخی از استانداردهای BSI موجود در آرشیو :

    IEC 61851-1:2017
    Edition 3.0 (2017-02-07)
    Electric vehicle conductive charging system – Part 1: General requirements
     
    IEC 61851-21-1:2017
    Edition 1.0 (2017-06-19)
    Electric vehicle conductive charging system – Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply
     
    IEC 61851-21-2:2018
    Edition 1.0 (2018-04-18)
    Electric vehicle conductive charging system – Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply – EMC requirements for off board electric vehicle charging systems
    دانلود استاندارد bsi
    IEC 61851-23:2014
    Edition 1.0 (2014-03-11)
    Electric vehicle conductive charging system – Part 23: DC electric vehicle charging station
    IEC 61851-24:2014
    Edition 1.0 (2014-03-07)
    Electric vehicle conductive charging system – Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging
    ISO 17409:2015
    Edition 1.0 (2015-10-23)
    Electrically propelled road vehicles — Connection to an external electric power supply — Safety requirements
     
    IEC 62196-1:2014
    Edition 3.0 (2014-06-19)
    Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 1: General requirements
     
    IEC 62196-2:2016
    Edition 2.0 (2016-02-18)
    Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
     
    IEC 62196-3:2014
    Edition 1.0 (2014-06-19)
    Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers 
     
    IEC 62893-1:2017
    Edition 1.0 (2017-11-22)
    Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV – Part 1: General requirements
     
    IEC 62893-2:2017
    Edition 1.0 (2017-11-27)
    Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV – Part 2: Test methods
     
    IEC 62893-3:2017
    Edition 1.0 (2017-11-22)
    Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV – Part 3: Cables for AC charging according to modes 1, 2 and 3 of IEC 61851-1 of rated voltages up to and including 450/750 V

    فرم درخواست استاندارد BSI :

      ایمیل شما (الزامی)

      شماره و اسم استاندارد (اجباری)

      لینک استاندارد از http://techstreet.com (اجباری)

      تلفن (اختیاری)

      نام شما (اختیاری)

      توضیحات تکمیلی (شامل اطلاعات واریزی – به کدام بانک ما هزینه واریز شده؟ چه مبلغی؟ چه تاریخی؟

      کلمات کلیدی :

      استاندارد BSI ، استاندارد en ، استاندارد های BS ، استاندارد های BS EN، خرید استاندارد BS EN، دانلود رایگان استاندارد BSI، فروش استاندارد BS EN، مجموعه کامل استاندارد BSI ، دانلود استاندارد bsi

    • دانلود استاندارد BS به شماره BS EN 13382 و BS 13626

      دانلود استاندارد BS به شماره BS EN 13382 و BS 13626

      دانلود استاندارد BS

      برای خرید کلیه استانداردهای BS ، کافیست مشخصات استانداردهای مورد نیاز را برای ما ارسال کنید (یکی از راههای ارتباطی در لینک تماس با گیگاپیپر). هزینه استاندارد BS به شما اطلاع داده می شود. پس از واریز لینک دانلود استاندارد BS ارسال می شود.

      دانلود استاندارد BS EN 13382

      BSI BS EN 13382 – Flat pallets for materials handling – Principal dimensions

      Standard Number BS EN 13382:2002
      Title Flat pallets for materials handling. Principal dimensions
      Status Current, Under review
      Publication Date 18 April 2002
      Cross References ISO 509, ISO 3676, EN ISO 445:1998, ISO 445:1996, ISO 3394, ISO 8611
      International Relationships EN 13382:2002
      Amended By AMD 14013
      Corrigendum, April 2002
      Descriptors Load-supporting devices, Materials handling equipment, Dimensional tolerances, Dimensions, Height, Materials handling components, Stacking, Pallets, Materials handling
      ICS 55.180.20
      Title in French Palettes plates pour la manutention et le transport de marchandises. Dimensions principales
      Title in German Flachpaletten fuer die Handhabung von Guetern. Hauptmasse
      Committee PKW/0
      ISBN 0 580 39594 4
      Publisher BSI
      Format A4

      دانلود استاندارد BSI BS EN 13626

      BSI BS EN 13626 – BS EN 13626:2003
      Packaging. Box pallets. General requirements and test methods

      Standard Number BS EN 13626:2003
      Title Packaging. Box pallets. General requirements and test methods
      Status Confirmed, Current
      Publication Date 18 December 2003
      Confirm Date 04 February 2014
      Cross References EN 13183-1, EN 13183-2, EN 13382, EN 22206, ISO 2206:1987, EN 22248, ISO 2248:1985, EN ISO 445, ISO 445:1996, EN ISO 2233, ISO 2233:2000, EN ISO 2234, ISO 2234:2000, EN ISO 2244, ISO 2244:2000, EN ISO 2247, ISO 2247:2000
      International Relationships EN 13626:2003
      Descriptors Mechanical testing, Materials handling components, Performance, Storage equipment, Loading, Re-usable, Boxes, Performance testing, Pallets, Materials handling equipment
      ICS 55.180.20
      Title in French Emballage. Caisses palettes. Exigences generales et methodes d’essai
      Title in German Verpackung. Boxpaletten. Allgemeine Anforderungen und Pruefverfahren
      Committee PKW/0
      ISBN 0 580 43109 6
      Publisher BSI

       گیگاپیپردانلود رایگان استاندارد BS

      در صورت سفارش 5 استاندارد BS، یک استاندارد BSI را به رایگان دریافت خواهید کرد. برای  دریافت استاندارد رایگان BS مشخصات 6 استاندارد را ارسال کنید و هزینه 5 استاندارد BS  را پرداخت کنید.

      خرید استاندارد BS

      برای خرید هر استاندارد BS که از سایت https://shop.bsigroup.com نیاز دارید، کافیست، مشخصات استاندارد BSI مورد نیاز را از طریق فرم زیر اطلاع دهید. استاندارد BS مورد درخواست ظرف چند ساعت تهیه و ارسال می شود.

      فرم درخواست استاندارد BS

        ایمیل شما (الزامی)

        شماره و اسم استاندارد (اجباری)

        لینک استاندارد از http://techstreet.com (اجباری)

        تلفن (اختیاری)

        نام شما (اختیاری)

        توضیحات تکمیلی (شامل اطلاعات واریزی – به کدام بانک ما هزینه واریز شده؟ چه مبلغی؟ چه تاریخی؟

      • دانلود استانداردهای BSI PD CEN TS 16555

        دانلود استانداردهای BSI PD CEN TS 16555

        دانلود استاندارد BSI PD CEN TS 16555

        استاندارد نوآوری SR CEN/TS 16555-1:2015 در حال حاضر در هفت بخش تدوین شده است. در ادامه عنوان هر بخش و فهرست مطالب انها اورده شده است.

        استاندارد مدیریت نوآوری اتحادیه اروپا

        استاندارد مدیریت نوآوری اتحادیه اروپا، یکی از معدود استانداردهای مدیریتی کلان و روزآمدی است که به منظور ایجاد یکپارچگی و هماهنگی بیشتر در زمینه مدیریت نوآوری در دسترس قرار گرفته است. استاندارد مدیریت نوآوری در اصل به صورت هفت سند استاندارد (از نوع مشخصه فنی) به طور جدا اما مرتبط با هم تدوین و انتشار یافته است. ولی در اینجا می توانید کلیه استانداردهای مورد نظر را در قالب پکیج با قیمت 39 هزار تومان خریداری کنید.

        خرید استاندارد CEN TS 16555

        نظام مدیریت نوآوری که در قالب مجموعه استانداردهای 16555 معرفی شده است، تلاش دارد رویکردها و اقدامات کلیدی مدیریتی را برای توسعه و تحقق هرچه بیشتر و بهتر نوآوری معرفی نماید.

        هزینه 7 فایل استاندارد، که در زیر آورده شده است، 39 هزار تومان می باشد که پس از واریز هزینه ایمیل می شود.

        BSI PD CEN TS 16555-1 Innovation Management Part 1 Innovation Management System

        PD CEN/TS 16555-1:2013
        CEN/TS 16555-1:2013 (E)

        Contents Page

        Foreword…………………………………………………………………………………………………………………………………….3
        Introduction ………………………………………………………………………………………………………………………………..4
        1 Scope………………………………………………………………………………………………………………………………6
        2 Normative references………………………………………………………………………………………………………..6
        3 Terms and definitions ……………………………………………………………………………………………………….6
        4 Context of the organisation ……………………………………………………………………………………………….6
        5 Leadership for innovation………………………………………………………………………………………………….7
        6 Planning for innovation success………………………………………………………………………………………..9
        7 Innovation enablers/driving factors ………………………………………………………………………………….10
        8 Innovation management process……………………………………………………………………………………..13
        9 Performance assessment of the innovation management system……………………………………….15
        10 Improvement of the innovation management system …………………………………………………………16
        11 Innovation management techniques…………………………………………………………………………………17
        Bibliography………………………………………………………………………………………………………………………………21

        BSI PD CEN / TS 16555-1 مدیریت نوآوری بخش اول: سیستم مدیریت نوآوری

         

        BSI PD CENTS 16555-2 Innovation management Part 2 Strategic intelligence management

        CEN/TS 16555-2:2014 (E)

        Contents Page

        Foreword…………………………………………………………………………………………………………………………………………..3
        Introduction ………………………………………………………………………………………………………………………………………4
        1 Scope ……………………………………………………………………………………………………………………………………5
        2 Normative references …………………………………………………………………………………………………………….5
        3 Terms and definitions ……………………………………………………………………………………………………………5
        4 The strategic intelligence system …………………………………………………………………………………………..6
        4.1 General process…………………………………………………………………………………………………………………….6
        4.2 Identification of strategic intelligence needs…………………………………………………………………………..6
        4.3 Gathering the information………………………………………………………………………………………………………7
        4.4 Information analysis and valuation…………………………………………………………………………………………8
        4.4.1 Information analysis and interpretation ………………………………………………………………………………….8
        4.4.2 Analysis methods and tools …………………………………………………………………………………………………..8
        4.4.3 Outcomes of the strategic intelligence system ……………………………………………………………………….9
        4.4.4 Storage and future use of outcomes ………………………………………………………………………………………9
        5 Management of the strategic intelligence system………………………………………………………………… 10
        5.1 Description of the management of strategic intelligence system …………………………………………. 10
        5.2 Leadership…………………………………………………………………………………………………………………………. 10
        5.2.1 General responsibilities ……………………………………………………………………………………………………… 10
        5.2.2 Top management ……………………………………………………………………………………………………………….. 11
        5.2.3 SI coordination and resource management…………………………………………………………………………. 11
        5.2.4 Strategic intelligence project lead(s)…………………………………………………………………………………… 12
        5.3 SI steering process…………………………………………………………………………………………………………….. 12
        5.4 SI implementation………………………………………………………………………………………………………………. 13
        5.4.1 Description of the SI action implementation process…………………………………………………………… 13
        5.4.2 Strategic intelligence action sheet design…………………………………………………………………………… 13
        5.5 Resources to support strategic intelligence system ……………………………………………………………. 14
        5.5.1 Competences …………………………………………………………………………………………………………………….. 14
        5.5.2 Infrastructure and IT resources…………………………………………………………………………………………… 14
        5.5.3 Financial planning ……………………………………………………………………………………………………………… 14
        5.6 Protection and exploitation of results …………………………………………………………………………………. 15
        5.7 Management of the appropriate flows of information…………………………………………………………… 15
        6 Performance evaluation ……………………………………………………………………………………………………… 15
        7 Improvement of the strategic intelligence system ……………………………………………………………….. 16
        Annex A (informative) Sub-contracting……………………………………………………………………………………………. 17
        Bibliography ………………………………………………………………………………………………………………………………….. 18

        CEN / TS 16555-2، مدیریت نوآوری – قسمت 2: مدیریت اطلاعات استراتژیک

         

        CEN TS 16555-3 Innovation management Part 3- Innovation thinking

        CEN/TS 16555-3:2014 (E)

        CEN/TS 16555-3, Innovation management — Part 3: Innovation thinking دانلود استانداردهای مدیریت نوآوری سال 2015 بخش 1 تا 7گیگاپیپر
        CEN/TS 16555-3, Innovation management — Part 3: Innovation thinking

        Contents Page

        Foreword…………………………………………………………………………………………………………………………………………..3
        Introduction ………………………………………………………………………………………………………………………………………4
        1 Scope ……………………………………………………………………………………………………………………………………5
        2 Normative references …………………………………………………………………………………………………………….5
        3 Terms and definitions ……………………………………………………………………………………………………………5
        4 Innovation thinking………………………………………………………………………………………………………………..5
        4.1 General………………………………………………………………………………………………………………………………….5
        4.2 Key drivers ……………………………………………………………………………………………………………………………6
        4.3 Supportive behaviours and competencies ……………………………………………………………………………..6
        4.3.1 General………………………………………………………………………………………………………………………………….6
        4.3.2 Behaviours ……………………………………………………………………………………………………………………………6
        4.3.3 Competencies ……………………………………………………………………………………………………………………….7
        5 Innovation thinking – steps involved………………………………………………………………………………………7
        5.1 General………………………………………………………………………………………………………………………………….7
        5.2 Step 1 – Information gathering……………………………………………………………………………………………….8
        5.3 Step 2 – Generating solutions………………………………………………………………………………………………..8
        5.4 Step 3 – Rapid learning ………………………………………………………………………………………………………….9
        5.5 Step 4 – Validation…………………………………………………………………………………………………………………9
        5.6 Step 5 – Synthesis of outputs ………………………………………………………………………………………………..9
        5.7 Step 6 – Outcomes…………………………………………………………………………………………………………………9
        Annex A (informative) Case Studies………………………………………………………………………………………………… 11
        A.1 Case study 1: Company A ………………………………………………………………………………………………….. 11
        A.1.1 Introduction……………………………………………………………………………………………………………………….. 11
        A.1.2 Process ……………………………………………………………………………………………………………………………… 11
        A.1.3 Step 1 – Information gathering……………………………………………………………………………………………. 12
        A.1.4 Step 2 – Generating solutions…………………………………………………………………………………………….. 12
        A.1.5 Step 3 – Rapid learning ………………………………………………………………………………………………………. 12
        A.1.6 Step 4 – Validation……………………………………………………………………………………………………………… 12
        A.1.7 Step 5 – Synthesis of outputs …………………………………………………………………………………………….. 12
        A.1.8 Step 6 – Outcomes……………………………………………………………………………………………………………… 12
        A.2 Case study 2 – Company B…………………………………………………………………………………………………. 13
        A.2.1 Introduction……………………………………………………………………………………………………………………….. 13
        A.2.2 Process ……………………………………………………………………………………………………………………………… 14
        A.2.3 Step 1 – Information gathering……………………………………………………………………………………………. 14
        A.2.4 Step 2 – Generating solutions…………………………………………………………………………………………….. 14
        A.2.5 Step 3 – Rapid learning ………………………………………………………………………………………………………. 14
        A.2.6 Step 4 – Validation……………………………………………………………………………………………………………… 14
        A.2.7 Step 5 – Synthesis of outputs …………………………………………………………………………………………….. 15
        A.2.8 Step 6 – Outcomes……………………………………………………………………………………………………………… 15
        Bibliography ………………………………………………………………………………………………………………………………….. 16

        CEN / TS 16555-3، مدیریت نوآوری – قسمت 3: تفکر نوآوری

         

        CEN TS 16555-4 Innovation management Part 4 Intellectual property management

        CEN/TS 16555-4:2014 (E)

        CEN/TS 16555-4, Innovation management — Part 4: Intellectual property management دانلود استانداردهای مدیریت نوآوری سال 2015 بخش 1 تا 7گیگاپیپر
        CEN/TS 16555-4, Innovation management — Part 4: Intellectual property management

        Contents Page
        Foreword…………………………………………………………………………………………………………………………………………..3
        Introduction ………………………………………………………………………………………………………………………………………4
        1 Scope ……………………………………………………………………………………………………………………………………5
        2 Normative references …………………………………………………………………………………………………………….5
        3 Terms and definitions ……………………………………………………………………………………………………………5
        4 Concept and purpose of intellectual property management ……………………………………………………6
        5 The intellectual property strategy…………………………………………………………………………………………..8
        5.1 The role of top management…………………………………………………………………………………………………..8
        5.2 Interactions with various functions ………………………………………………………………………………………..9
        5.3 Competences and skills requirements………………………………………………………………………………… 10
        5.4 Budget and cost control …………………………………………………………………………………………………….. 11
        5.5 Communication………………………………………………………………………………………………………………….. 11
        6 Implementation of the IP strategy……………………………………………………………………………………….. 12
        6.1 Traceability………………………………………………………………………………………………………………………… 12
        6.2 IP decision making …………………………………………………………………………………………………………….. 12
        6.3 Strategic intelligence and risk management ……………………………………………………………………….. 13
        6.4 IPR portfolio development, management and exploitation…………………………………………………… 14
        6.4.1 Structuring IPR portfolio…………………………………………………………………………………………………….. 14
        6.4.2 Analysis of the potential IPR ………………………………………………………………………………………………. 14
        6.4.3 Intellectual property exploitation ………………………………………………………………………………………… 15
        6.4.4 Acquisition, sale, concession and licensing (-in and -out) of third parties IP rights ……………… 16
        Annex A (informative) Authenticated documentation to record IP ……………………………………………………. 17
        Annex B (informative) Innovation and invention disclosure …………………………………………………………….. 18
        Annex C (normative) Methods and criteria for the assessment of IP rights………………………………………. 19
        C.1 Objectives and principles …………………………………………………………………………………………………… 19
        C.2 Strategic criteria…………………………………………………………………………………………………………………. 20
        C.3 Qualitative criteria………………………………………………………………………………………………………………. 22
        C.4 Quantitative criteria ……………………………………………………………………………………………………………. 23
        Annex D (informative) IP and standardization………………………………………………………………………………….. 26
        D.1 General………………………………………………………………………………………………………………………………. 26
        D.2 Various strategies of the organization relayed by intellectual property………………………………… 27
        Annex E (informative) Intellectual property management in a collaborative environment …………………. 28
        E.1 Introduction……………………………………………………………………………………………………………………….. 28
        E.2 Definition …………………………………………………………………………………………………………………………… 28
        E.3 Scope of collaborative contexts………………………………………………………………………………………….. 29
        E.4 Different types of collaboration in the innovation process…………………………………………………… 29
        E.5 Legal………………………………………………………………………………………………………………………………….. 30
        E.6 Collaboration to create; impact of financing sources on IP ownership, assignment …………….. 31
        E.7 General best practices to comply with………………………………………………………………………………… 31
        Bibliography ………………………………………………………………………………………………………………………………….. 33

        CEN / TS 16555-4، مدیریت نوآوری – قسمت 4: مدیریت مالکیت معنوی

         

        CEN/TS 16555-5, Innovation management — Part 5: Collaboration management

        CEN/TS 16555-5:2014 (E)

        CEN/TS 16555-5, Innovation management — Part 5: Collaboration management دانلود استانداردهای مدیریت نوآوری سال 2015 بخش 1 تا 7گیگاپیپر
        CEN/TS 16555-5, Innovation management — Part 5: Collaboration management

        Contents Page
        Foreword…………………………………………………………………………………………………………………………………………..3
        Introduction ………………………………………………………………………………………………………………………………………4
        1 Scope ……………………………………………………………………………………………………………………………………5
        2 Normative references …………………………………………………………………………………………………………….5
        3 Terms and definitions ……………………………………………………………………………………………………………5
        4 Collaboration…………………………………………………………………………………………………………………………5
        4.1 General………………………………………………………………………………………………………………………………….5
        4.2 Collaboration and its benefits ………………………………………………………………………………………………..5
        4.3 Types of collaboration …………………………………………………………………………………………………………..6
        5 Collaboration at different stages in the innovation process…………………………………………………….8
        6 Management of collaboration…………………………………………………………………………………………………9
        6.1 General………………………………………………………………………………………………………………………………….9
        6.2 Internal collaboration …………………………………………………………………………………………………………….9
        6.2.1 Culture ………………………………………………………………………………………………………………………………….9
        6.2.2 Management commitment ……………………………………………………………………………………………………..9
        6.2.3 Resources……………………………………………………………………………………………………………………………..9
        6.3 External collaboration ………………………………………………………………………………………………………… 10
        6.3.1 Criteria for external collaboration……………………………………………………………………………………….. 10
        6.3.2 Finding the right partners …………………………………………………………………………………………………… 10
        6.3.3 The collaboration agreement………………………………………………………………………………………………. 11
        6.3.4 Governance ……………………………………………………………………………………………………………………….. 11
        6.3.5 Intellectual property …………………………………………………………………………………………………………… 11
        7 Collaboration between large and small organizations …………………………………………………………. 12
        7.1 General………………………………………………………………………………………………………………………………. 12
        7.2 Small organizations……………………………………………………………………………………………………………. 12
        7.3 Large organizations……………………………………………………………………………………………………………. 12
        8 Encouraging collaboration …………………………………………………………………………………………………. 13
        8.1 General………………………………………………………………………………………………………………………………. 13
        8.2 Collaboration across time and distance ……………………………………………………………………………… 13
        Annex A (informative) Case studies ………………………………………………………………………………………………… 15
        A.1 Case study 1 – An open innovation consortium ………………………………………………………………….. 15
        A.2 Case study 2 – Bilateral collaboration…………………………………………………………………………………. 15
        A.3 Case study 3 – A public-private partnership ……………………………………………………………………….. 15
        Bibliography ………………………………………………………………………………………………………………………………….. 17

        CEN / TS 16555-5، مدیریت نوآوری – قسمت 5: مدیریت همکاری

         

        CEN/TS 16555-6, Innovation management — Part 6: Creativity management

        CEN/TS 16555-6:2014 (E)

        CENTS 16555-6, Innovation management — Part 6 Creativity management دانلود استانداردهای مدیریت نوآوری سال 2015 بخش 1 تا 7گیگاپیپر
        CENTS 16555-6, Innovation management — Part 6 Creativity management

        Contents Page
        Foreword…………………………………………………………………………………………………………………………………………..3
        Introduction ………………………………………………………………………………………………………………………………………4
        1 Scope ……………………………………………………………………………………………………………………………………5
        2 Normative references …………………………………………………………………………………………………………….5
        3 Terms and definitions ……………………………………………………………………………………………………………5
        4 Understanding creativity within an organization …………………………………………………………………….6
        5 Creative leadership and setting policy……………………………………………………………………………………6
        6 Managing the creative process ………………………………………………………………………………………………6
        7 Types of creative ideas ………………………………………………………………………………………………………….7
        7.1 General………………………………………………………………………………………………………………………………….7
        7.2 Ideas identifying a need …………………………………………………………………………………………………………8
        7.3 Ideas identifying a solution ……………………………………………………………………………………………………8
        8 Encouraging participation in idea generation – motivation……………………………………………………..8
        9 Evaluation and selection of ideas…………………………………………………………………………………………..9
        9.1 Idea generation ……………………………………………………………………………………………………………………..9
        9.2 Collecting ideas …………………………………………………………………………………………………………………….9
        9.3 Selecting and refining ideas ……………………………………………………………………………………………….. 10
        10 Documentation and intellectual property…………………………………………………………………………….. 11
        Annex A (informative) Case studies ………………………………………………………………………………………………… 12
        A.1 Case study 1 – Sourcing ideas from end users……………………………………………………………………. 12
        A.2 Case study 2 – Adapting an idea from outside the organization…………………………………………… 12
        A.3 Case study 3 – Collaborating with an external partner…………………………………………………………. 13
        Bibliography ………………………………………………………………………………………………………………………………….. 14

        CEN / TS 16555-6، مدیریت نوآوری – قسمت 6: مدیریت خلاقیت

         

        CEN/TS 16555-7, Innovation management — Part 7: Innovation management assessment

        CEN/TS 16555-7:2015 (E)

        CEN/TS 16555-7, Innovation management — Part 7: Innovation management assessment دانلود استانداردهای مدیریت نوآوری سال 2015 بخش 1 تا 7گیگاپیپر
        CEN/TS 16555-7, Innovation management — Part 7: Innovation management assessment

        Contents Page
        European foreword……………………………………………………………………………………………………………………………………. 3
        Introduction ……………………………………………………………………………………………………………………………………………….. 4
        1 Scope……………………………………………………………………………………………………………………………………………….. 6
        2 Normative references…………………………………………………………………………………………………………………… 6
        3 Terms and definitions ………………………………………………………………………………………………………………….. 7
        4 Types of innovation management assessment approaches …………………………………………………… 8
        4.1 General……………………………………………………………………………………………………………………………………………. 8
        4.2 Check-list assessment…………………………………………………………………………………………………………………… 8
        4.3 Maturity assessment …………………………………………………………………………………………………………………….. 9
        4.4 Benchmarking assessment ………………………………………………………………………………………………………….. 9
        4.5 Application of the innovation management assessment approaches………………………………… 10
        5 Guidelines for innovation management assessment ……………………………………………………………. 11
        5.1 General…………………………………………………………………………………………………………………………………………. 11
        5.2 Preparation for the innovation management assessment…………………………………………………… 11
        5.2.1 Defining the need for and objectives of the innovation management assessment ………….. 11
        5.2.2 Defining the scope of the innovation management assessment …………………………………………. 13
        5.2.3 Identifying the most suitable approach and tool for the innovation management
        assessment…………………………………………………………………………………………………………………………………… 14
        5.3 Execution of the innovation management assessment ………………………………………………………… 15
        5.3.1 Timing and team for the innovation management assessment ………………………………………….. 15
        5.3.2 Conducting the innovation management assessment ………………………………………………………….. 16
        5.4 Action plan development for improvement of the innovation management system………. 17
        5.4.1 General…………………………………………………………………………………………………………………………………………. 17
        5.4.2 Developing the action plan for an improved innovation management system………………… 17
        5.4.3 Documentation and communication of the innovation management assessment
        results…………………………………………………………………………………………………………………………………………… 17
        5.5 Realization of measurable results from the innovation management assessment …………. 19
        Annex A (informative) Comparison of innovation management assessment methods and
        finding the right tools ………………………………………………………………………………………………………………… 20
        Annex B (normative) Deliverables and expected impact from innovation management
        assessment…………………………………………………………………………………………………………………………………… 22

        CEN / TS 16555-7، مدیریت نوآوری – قسمت 7: ارزیابی مدیریت نوآوری

      • دانلود handbook standard BIP 0116

        برای دریافت و دانلود هندبوک های استاندارد با ما مکاتبه کنید.

        BIP 0116

        Managing security in outsourced and offshored environments. How to safeguard intellectual assets in a virtual business world

        If you need a working knowledge of how to implement and manage outsourcing and off-shoring of IT and business services, then this is the book for you.

        Even if you have no prior knowledge of the subject, the book’s focus on the practical along with the specialist aspects of security management will give you a firm grounding in outsourcing solutions.

        Access insights, tips and the warnings associated with outsourcing, including the three highly persuasive factors that will help you convince your managing director to see the benefits of externalizing supplies and services, whilst managing the risks.

        Clearly laid out, the book sets out guidance, best practice and critical success factors for managing security risks. For the impatient amongst you, the key learning points contained in each chapter are a useful starting point for grasping the salient issues.

        The book is an easy-to-follow guide for anyone without prior knowledge of the topic. It sets out guidance, learning points, best practices and critical success factors associated with managing the security risks associated with outsourcing and off-shoring of IT and business services.

        The content is presented in an easy to understand and jargon-free style. Clearly structured to follow the life-cycle of outsourcing, you’ll read about definining, selection, negotiation, implementation and ongoing management of outsourced services.

        You’ll read research sponsored by the UK Government Cyber Security Knowledge Transfer Network, as practical guidelines are set out, to address the major areas of risk.

        Building on both practical, real-life experience of implementing and managing large scale outsourcing programmes.

        The book stands out for its focus on the “softer” management issues, such as relationship management, rather than the more factual points covered in other guides on this subject. It is those issues (strategy, risk assessment and relationship management) that ultimately determine the success of a major outsourcing programme.

        How will this book benefit me?

        Buy the book and follow the real-life experiences of designing and managing large scale outsourcing programmes, so you too can harness the powerful business practices that are capable of delivering impressive cost savings and operational benefits.

        Who should read this book on outsourcing security?

        This book would be an informative guide for anyone without prior knowledge of security management in outsourced and offshore environments. It would be of interest to:

        • Business managers
        • Chief Information officers (CIOs)
        • Security managers
        • Risk managers
        • Auditors
        • Procurement managers
        • Legal advisers
        • Consultants

        If you are studying IT, information security or business studies this will also prove invaluble reference.

        Contents of this book about off-shore outsourcing include:

        • Introduction
        • Types of outsourcing and off-shoring and their associated risks
        • Business drivers for outsourcing and their impact on security
        • Planning and preparation for outsourcing
        • Selecting a supplier
        • Developing and negotiating the contract
        • Implementing the new arrangement
        • Managing the relationship
        • Review, termination and exit
        • In conclusion
        • References.

        About the author

        David Lacey is an IT and Security Director, with experience in large organizations such as the Royal Dutch/Shell Group and the Royal Mail Group.

        He is a member of the Infosecurity Europe ‘Hall of Fame’.

        His achievements include developing the original content of British Standard BS7799, achieving the world’s first accredited certification, and jointly founding the Jericho Forum.

        Read David Lacey’s IT Security Blog at ComputerWeekly.com.

        Read what the reviewers have said about David Lacey’s book:

        “The handbook every manager should read before they sign the contract.” Professor Paul Dorey,  Visiting Professor, Royal Holloway, University of London

        “This well-respected author takes a fresh perspective on the challenges of security. This ‘stand-out’ guide shows clearly what needs to be done.” Dr Alastair MacWillson, Global Managing Director, Accenture Technology Consulting

        “A ‘must-have’ comprehensive reference of essential standards, controls and legislation. The author, David Lacey, offers superb practical guidance based on a wealth of experience.” Geoff Harris, President of the Information Systems Security Association (ISSA) – UK

        “An interesting and informative read on an extremely important, topical subject.” Professor Fred Piper, Information Security Group, Royal Holloway, University of London

      • دانلود هندبوکهای استاندارد BIP 0002

        BIP 0002

        Data Protection: Guidelines for the Use of Personal Data in System Testing (Second Edition)

        Data Protection: Guidelines for the use of personal data in system testing (2nd Edition)

        Louise Wiseman and Jenny Gordon

        In an area where few documented processes exist, this book provides guidelines to the use of live personal data in system testing, in compliance with the Data Protection Act 1998 (DPA).

        A number of recent high-profile data security breaches, (although they do not relate to live testing) have shown how vital it is to keep data protection high on the business agenda.

        Organizations have a legal obligation to respect the rights of individuals to confidentiality and to ensure security of their personal data. This guide shows that compliance need not be overly complex or expensive, and includes:

        • Fully updated content, in line with the new standard for data protection BS 10012
        • References to guidance issued by the Information Commissioner’s Office (ICO)
        • Guidance on governance and audit including reporting/handling of data protection breaches
        • Templates to aid application of the guidance
        • Examples include a testing policy and a testing approval form.

        By effective use of risk assessment techniques, an organization can take a realistic view of the dangers, whilst at the same time, ensuring they comply with the law. The revised edition references the new BS 10012.

        It shows the importance of integrating testing guidelines into an organization’s overall ‘governance’ structure, so testing is embedded in day-to-day business practice rather than something that takes special effort when testing needs to be carried out. This makes data protection compliance easier to achieve and monitor. It also ties in with the new standard, BS 10012:2009 Data protection. Specification for a personal information management system, which has sections on governance and audit.

        Guidance issued by the Information Commissioner’s Office (ICO) is referenced on a number of issues (including the reporting/handling of data protection breaches), as well as helping companies to see how testing might fit with the Personal Information Management System (PIMS), described in BS 10012.

        The authors have included templates to make it easy to apply the guidance in practice.

        Additionally, there are more template-style examples, such as an example of a testing policy and of a testing approval form.

        It is also timeless – the basic guidance will remain solid and relevant even as technology and business practice move on.

         

         

         

         

      • تهیه handbook استاندارد BIP 2010

        برای دانلود هندبوک استاندارد زیر با ما مکاتبه کنید.

        BIP 2010:2004

        IMS: The excellence model. Integrated management systems series

        IMS: The Excellence Model (Integrated Management Systems Series)

        John M Kelly

        This book addresses the needs of today’s organizations, which are under a great deal of pressure to improve performance and achieve competitive advantage.

        The model provides a ‘common language’ between organizations, which is particularly useful when comparing or developing customer/supplier relationships and the supply chain.

        The book also explains how a range of standards, such as those on quality, environment and health safety can be integrated and enhanced by using the excellence model.

        This approach will help in achieving continuous improvement and in harmonizing the requirements of all stakeholders in the organization.

        Contents of this IMS book include:

        Introduction

        • European Foundation for Quality Management (EFQM)
        • British Quality Foundation (BQF)
        • The Excellence Model

        The business case

        • Focus on the customer
        • The continual improvement approach
        • Examining the costs of quality

        Standards – A process benchmark

        • The range of standards and their applicability

        The need for continual improvement – ‘Beyond the badge’

        • What is quality?
        • Quality management
        • Some basic principles of Total Quality Management (TQM)
        • The learning organization

        Challenging assumptions – How well do the processes work?

        • Processes
        • Creating a process culture
        • Summary

        Process measurement

        • Measurement
        • Is the organization making progress?
        • Critical Success Factors (CSFs)

        The need for process analysis

        • What is process analysis?

        Models for assessing an organization

        • The Excellence Model
        • The Malcolm Baldrige Award
        • The Balanced Scorecard

        The Excellence Model

        • The scoring process

        Conducting an assessment

        • Self-assessment
        • Award simulation
        • Third-party assessment
        • Award assessments

        Performance of the organization

        • SMART objectives
        • Performance measures
        • Linkages to an IMS
        • Link for system integration

        Comparisons with the best – Benchmarking

        • Improvement in the organization and benchmarking
        • Types of benchmarking
        • A brief history of benchmarking
        • Identifying best practice
        • Barriers to progress in benchmarking
        • Getting started

        Summary

        • Common elements of quality, environmental
        • OH&S systems and the Excellence Model

        References

        Each volume is written by an acknowledged expert in the field. The series editor is David Smith of IMS Risk Solutions Ltd, who has been involved in writing management system standards since the early 1990s and is himself the author of a number of BSI books on the subject.

        The Integrated Management Systems (IMS) series

        The Integrated Management Systems (IMS) series of books provides practical guidance and advice on integrating the systems operating within an organization. The IMS series provides a framework into which additional management systems can be incorporated.

      • دانلود کتاب استاندارد BIP 2119

        برای دانلود این هندبوک استاندارد با ما مکاتبه کنید

        BIP 2119:2007

        IMS: A framework for integrated management systems. Background to PAS 99 and its application. Integrated management systems series

        The Integrated Management Systems (IMS) series of books provides practical guidance and advice on integrating the systems operating within an organization.  This new IMS book provides a framework into which additional management systems can be incorporated.

        IMS: A Framework for Integrated Management Systems is the new edition of IMS: The Framework. It reviews the background to the current situation and the publication of PAS 99. The new IMS book offers an outline for a framework that enables the incorporation of any chosen standards or codes relating to any specific discipline. It helps to identify the benefits of the integrated approach and emphasizes the key features that make a system effective.

        This new IMS book provides straightforward and easy-to-use guide takes you through:

        • Harmonizing different approaches
        • Common requirements of management systems and making an integrated system work
        • In-depth look at PAS 99
        • Handy ‘getting started’ section to aid you over that first hurdle.

        ABOUT THE AUTHORS
        David Smith and Rob Politowski are directors of iMS Risk Solutions, providers of world class integrated risk management services in a wide range of risk areas relevant to modern day business including Health, Safety, Environment and Governance.

        As well as well as a leading role in the drafting of PAS 99 and the IMS series, they have authored a wide range of guidance books on management systems standards that are also available through BSI.  Additionally, David Smith represents the UK on a variety of international standards committees and is chair of the BSI committee on Health & Safety management systems standards.

      • دانلود هندبوک BIP 2012

        برای ارسال این کتاب استاندارد به ایمیل شما ، با ما مکاتبه کنبد.

        BIP 2012:2003

        IMS: Corporate governance. Integrated management systems series

        IMS. Corporate Governance (Integrated Management Systems Series)

        IMS Risk Solutions Ltd

        This IMS publication examines the risks that large and small businesses have to consider and manage. Facing and managing these risks will help to safeguard the future of the business. It will also reassure customers, owners and other stakeholders that the organization is well managed.

        Contents of IMS Corporate Governance include:

        • Introduction
        • What is meant by risk management
        • What do we mean by risk?
        • The processes
        • Spotting the critical points
        • Assessing a risk
        • What is at risk?
        • Reputation
        • Categories of risk
        • Quality risks
        • Risk and the environment
        • Risks in sales and marketing
        • Financial risks
        • Security risks
        • Risks and technological change
        • Human resources
        • Corporate ethics and social responsibility
        • Managing risk in Corporate governance
        • Social accountability
        • Corporate Social Responsibility (CSR)
        • Managing risk in the framework of an integrated management system
        • Some final thoughts on risk
        • The public perception of risk
        • The value of insurance
        • Regulatory bodies
        • Dynamic risk
        • IMS Framework
        • References and further reading

        About the author

        Each volume is written by an acknowledged expert in the field. The series editor is David Smith of IMS Risk Solutions Ltd, who has been involved in writing management system standards since the early 1990s and is himself the author of a number of BSI books on the subject.

        The Integrated Management Systems (IMS) series

        The Integrated Management Systems (IMS) series of books provides practical guidance and advice on integrating the systems operating within an organization. The IMS series provides a framework into which additional management systems can be incorporated.

        Browse the other books in this series for integrated management systems