خرید پکیج استانداردهای پلیمر و پلی اتیلن
سایت گیگاپیپر به گرداوری کلیه استانداردهای پلیمر و پلی اتیلن در این زمینه پرداخته است. فایلهای استاندارد پلاستیک، پلیمر و پلی اتیلن بصورت پکیج کامل بفروش می رسد. همچنین این امکان فراهم است که شماره استاندارد مورد نظر را اعلام کنید و جدیدترین ویرایش استاندارد را دریافت کنید. برای خرید تک فایل و یا پکیج کامل با ما مکاتبه کنید.
امید است این استانداردها مورد توجه متخصصان و علاقه مندان این صنعت قرار بگیرد و ما همیشه سعی داریم این لیست را بروز و غنیتر نمائیم و در صورت نیاز داشتن به استانداردی که در لیست استانداردهای زیر نباشد لطفا نام و شماره استاندارد را برای ما به آدرس ایمیل ما ارسال نمائید و یا در بخش نظرات آنرا بیان نمائید تا در دستور کار قرار بگیرد.
لیست استانداردهای جدید پلیمر و پلی اتیلن پکیج دوم
برای دریافت این پکیج استاندارد با کد پکیج 917917 با ما مکاتبه کنید.
1. ISO 9080: 2003, Plastic piping and ducting systems – Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
2. ISO/TR 9080: 1992, Thermoplastics pipes for the transport fluids – Methods of Extrapolation of hydrostatic stress rapture data to determine the long-term hydrostatic strength of thermoplastics pipe materials
3. ISO 4894-1, Plastics – Styrene/Acrylonitrile (SAN) moulding and extrusion materials
4. ISO 19064, Plastics — Styrene/acrylonitrile (SAN) moulding and extrusion materials
5. ISO 1622-2, Plastics – Polystyrene (PS) moulding and extrusion materials
6. ISO 17855-1 & 2, Plastics – Polyethylene (PE) moulding and extrusion materials
7. ISO 2897-2, Plastics – Impact-resistant Polystyrene (PS-I) moulding and extrusion materials
8. ISO 19063, Plastics – Impact-resistant Polystyrene (PS-I) moulding and extrusion materials
9. ISO 4613-1 & 2, Plastics – Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials
10. ISO 6402-2, Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylenediene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials
11. ISO 19065-1, Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylenediene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials
12. ISO 19062-1, Plastics – Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials
13. ISO 7391-1, Polycarbonate (PC) moulding and extrusion materials
14. ISO 29988-1 & 2, Plastics – Polyoxymethylene (POM) moulding and extrusion materials
15. ISO 10366-2, Plastics – Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials
16. ISO 294-1 to 5, Plastics – Injection moulding of test specimens of thermoplastic materials
17. ISO 11173, Thermoplastics pipes – Determination of resistance to external blows – Staircase method
ناشران استانداردهای پلیمر و پلی اتیلن
استانداردهای پلی اتیلن و دیگر پلیمرها را با توجه به سازمان منتشر کننده استاندارد تقسیم بندی نموده ایم و کاربردهای هرکدام از استانداردها را در چند کلمه بیان کردیم.
استانداردهای ISO
استانداردهای ASTM
استانداردهای AWWA
استانداردهای BS
استانداردهای DIN
استانداردهای ISIRI
استانداردهای ISO پلیمر و پلی اتیلن
استانداردهای ایزو و کیفیت
اینکه با چه ابزار و با چه نظام و قاعده ای میتوان کیفیت محصول و خدمات را تضمین کرد همگی در استانداردهای تضمین کیفیت پنهان است. سازمان بین المللی استاندارد برای رفع نیاز شرکتها، استانداردهای مختلفی را تعریف کرده است که از جمله معروفترین آنها ایزو 9000 بوده و موج آن تعداد زیادی شرکتها ایرانی را فرا گرفته است. البته لازم به ذکر است که استاندارد ایزو با استاندارهای تضمین کیفیت معنای متفاوتی را دارد ولی در ایران همچنان بسیاری از مردم و مدیران این دو استاندارد را با هم اشتباه میگیرند.
تفاوت استانداردهای « تضمین کیفیت » با استانداردهای « کیفیت محصول » بر میگردد به دید کلی ما به کیفیت شرکت و محصول مورد نظرمان. معمولا منظور از استانداردهای محصول حداقل مشخصه های فنی لازم برای کیفیت مورد درخواست است . درحالیکه استانداردهای تضمین کیفیت حداقل الزامات کیفی لازم در همه ابعاد شرکت و فرایندهای آن را نشان می دهند. مثلا استاندارد محصول مشخصه های محصول مورد نظر ما را از نظر ، استحکام ، دوام و … تعیین میکند تا حداقل کیفیت قابل قبول را داشته باشد. اما استاندارد تضمین کیفیت تنها بر عوامل تاثیرگذار بر کیفیت که میباید از طریق فرآیندهای مختلف مثل تولید ، طراحی و خرید انجام میگیرد، تاکید میکند.
لیست استانداردهای ایزو پلیمر
سایت گیگاپیپر به گرداوری کلیه استانداردهای پلیمر و پلی اتیلن در این زمینه پرداخته است
ISO 4427 : Polyethylene (PE) pipes for water supply – specifications
ISO 4427-1 :Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General
ISO 4427-1 :Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General TECHNICAL CORRIGENDUM 1
ISO 4427-2 :Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes
ISO 4427-3 : Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings
ISO 4437 : Buried polyethylene (PE) pipes for the supply of gaseous fuels- Metric series – specifications
ISO 442-2 : Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2:Pipes
ISO 1969 : Fibre Ropes – polyethylene – 3- and 4 strand ropes
ISO 2268 : Surface active agents (non Ionic) -Determination of polyethylene glycols and non ionic active matter (Adducts)-Weibull method
ISO 3458 : Assembled joints between fittings and polyethylene (PE) Pressure pipes – test of leakproofness under internal pressure
ISO 3459 : Polyethylene (PE) Pressure pipes – joints assembled with mechanical fitting- Internal under-Pressure test method and requirment
ISO 3501 : Assembled joints between fittings and polyethylene )PE) pressure pipes- Test of resistance to pull out
ISO 3503 : Assembled joints between fittings and polyethylene (PE) pressure pipes-Test of leakproofness under internal pressure when subjected to bending
ISO 3633 : UPVC pipes and fittings for soil and wasfe discharge (low and hightemperature) Systems inside buildings – Specifications
ISO 3663 : Polyethylene (PE) pressure pipes and fittings, metric series – Dimensions of flanges
ISO 4059 : polyethylene (PE) pipes – pressure drop in Mechanical pipe-jointing systems – method of test and requirments
ISO 6402-2 : Plastics -Acrylonitrile styrene acrylate (ASA), acrylonitrile (ethylene propylene diene) styrene (AEPDS) and acrylonitrile (Chlorinated polyethylene) styrene (ACS) moulding and extrusion materials , Part 2: Preparation of test speciments and detemination of properties
ISO 7214 : Cellular Plastics – Polyethylene – Methods of test
ISO 8005-3 : Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels – metric series – Specifications , Part 3: Electrofusion fittings
ISO 8180 : Ductile iron pipes – polyethylene sleeving
ISO 8283-2 : Plastics pipes and fittings – Dimensions of sockets and spigots for discharge systems inside buildings , Part 2: Polyethylene
ISO 8770 : Plastics piping systems for soil and waste discharge (Low and high temperature) inside buildings – Polyethylene
ISO 8772 : High density Polyethylene (HDPE) pipes and fittings for buried drainage and sewerage systems -Specifications
ISO 8796 : Polyethylene PE 32 and PE 40 pipes for irrigation laterals — Susceptibility to environmental stress cracking induced by insert-type fittings — Test method and requirements
ISO 9625:Mechinal Joint fittings for use eith polyethylene pressure pipes for irrigation purposes
ISO 10933 : Polyethylene (PE) valves for gas distribution systems
ISO 11413 : Plastics pipe and fittings – preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
ISO 11414 : Plastics pipes and fittings – preparation of polyethylene (PE) pipe / pipe or pipe/fitting test piece assemblies by butt fusion
ISO 13460 : Agricultural irrigation equipment – plastics saddles for polyethylene pressure pipes
ISO 13480 : polyethylene pipes – resistance to slow crack growth – Cone test method
ISO 13761 : Plastics pipes and fittings – pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 C
ISO 13954 : Plastics pipes and fittings – peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
ISO 13955 : Plastics pipes and fittings – crushing decohesion test for polyethylene (PE) electro fusion assemblies
ISO 13957 : Plastics pipes and fittings – polyethylene (PE) tapping tees – Test method for impact resistance
ISO 14236 : Plastics pipes and fittings – mechanical joint compression fittings for use with polyethylene pressure pipes in water supply systems
ISO 14531 – 2 : Plastics pipes and fittings – Crosslinked polyethylene (PEX) pipe systems for the conveyance of gaseous fuels – Metric series- Specifications , Part2 : Fittings fir heat fusion jointing
ISO 15875-1 : Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PEX) ,Part 1: General
ISO 15875-2 : Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PEX) ,Part 2: Pipes
ISO 15875-3 : Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PEX) ,Part 3: Fittings
ISO 15875-5 : Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PEX) ,Part 5: Fitness for purpose of the system
ISO 16241 : Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products-PENT
ISO 161-1 : Thermoplastics pipes for the conveyance of fluids – Nominal outside diameters and nominal pressures , Part 1:Metric Series
ISO 264 :Unplasticized Polyvinyl chloride (PVC) Fittings With plain Sockets for pipes under pressure -laying length-Metric series
ISO 727 : Fittings of unplasticized polyvinyl chloride (UPVC),chlorinated polyvinyl chloride (CPVC) or acrylonitrile/butadiene/styrene (ABS) with plain socjets for pipes under pressure – Dimensions of sockets – Metric series
ISO 727-1 : Fittings made from unplasticized poly(vinyl chloride)(UPVC), chlorinated poly vinyl chloride (CPVC) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure, Part 1: Metric Series
ISO 727-2 : Fittings made from unplasticized poly(vinyl chloride)(UPVC), chlorinated poly vinyl chloride (CPVC) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure, Part 2: Inch Based series
ISO 1167 : Thermoplastics pipes for the conveyance of fluids-Resistance to internal pressure – test method
ISO 1167-1 :Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method
ISO 1167-2 : Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
ISO 3663 : Polyethylene (PE) Pressure pipes and fittings, Metric series , Dimensions of flanges
ISO 4433-1: Thermoplastics Pipes – Resistance to liquid chemicals – Classification , Part 1 : Immersion test method
ISO 4433-2: Thermoplastics Pipes – Resistance to liquid chemicals – Classification , Part 2 : Polyolefin pipes
ISO 4433-3: Thermoplastics Pipes – Resistance to liquid chemicals – Classification , Part 3 : Upvc,Hi-PVC , CPVC
ISO 4433-4: Thermoplastics Pipes – Resistance to liquid chemicals – Classification , Part 4 : poly (vinylidene fluoride)(PVDF) pipes
ISO 4433-COR1: Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications ,TECHNICAL CORRIGENDUM 1
ISO 9080 : Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
ISO 9623 : PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure – Design lengths and size of threads- Metric Series
ISO 9624 : Thermoplastics pipes for fluids under pressure-Mating dimensions of flange adapters and loose backing flanges
ISO 12162 : Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient
ISO 12167-1 : Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
ISO 12167-2 : Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
ISO 12167-3 : Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3:Operator`s badge
ISO 12167-4 : Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 4:Traceability coding
ISO 13477 : Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)
ISO 13478 : thermoplastics pipes for the conveyance of fluids Determination of resistance to rapid crack propagation (RCP) – Full scale test
ISO 13479 : Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes
ISO 13480 : Polyethylene pipes – resistance to slow crack growth-Cone test method
ISO 13761 : Plastics pipes and fittings – pressure reduction factors for polyethylene pipeline systeme for use at temperatures above 20 C
ISO 14236 : Plastics pipes and fittings — Mechanicaljoint compression fittings for use with polyethylene pressure pipes in water supply systems
ISO 10358 – TR : Plastic pipes and fittings-Combined chemical-resistance classification table
ISO 10837 – TR : Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings
ISO 11295 – TR : techniques for rehabilitation of pipeline systems by the use of plastics pipes and fittings
ISO 11647 – TR : Fusion Compatibility of polyethylene (PE) pipe and fittings
ISO 13950 – TR : Plastics Pipes and fittings – Automatic recognition systems for electrofusion
استانداردهای ASTM پلیمر و پلی اتیلن
انجمن مواد و آزمون آمریکا (American Society for Testing and Materials) که به اختصار آنرا ASTM مینامند یکی از بزرگترین سازمانهای بینالمللی توسعهدهندهٔ استاندارد است.
استانداردهای گسترده ASTM که شامل استانداردهای فنی برای مواد، محصولات، سامانهها و خدمات است، بر اساس اجماع (توافق اعضا) به تصویب میرسد. ASTM دارای ۳۰٬۰۰۰ عضو از ۱۲۰ کشور جهان میباشد.
ASTM يک عملکرد کنترلي بين توسعه دهندگان استاندارد در آمريکا دارد و اين ادعا را دارد که بزرگترن ارگان توسعه دهنده ي استاندارد در جهان است.
بر اساس توافق نامه اي ، ASTM هزاران کميته ي فني داوطلب را پشتيباني مي کند، که اين کميته ها اعضاي خود را در سر تا سر جهان جهت دهي کرده که جمعاً بيش از دوازده هزار استاندارد را ايجاد و تعيين کرده اند.
ASTM بر خلاف سایر موسسههای استاندارد، نظیر BSI، DIN و AFNOR سازمانی دولتی نیست. در ایالات متحده آمریکا، مؤسسه ملی استاندارد آمریکا وظایف یک موسسه استاندارد ملی را بر عهده دارد.
ASTM دارای بیش از ۱۲٬۰۰۰ استاندارد است که در ۷۷ جلد به صورت سالیانه چاپ و منتشر میشود.
دانلود استانداردهای ASTM پلیمر و پلی اتیلن
ASTM D2122-2004 : Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
ASTM D2122-2004-2 : Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
ASTM D2122-2004-3 : Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
ASTM D2412-2008 : Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D2412-2008-2 : Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D2412-2008-3 : Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D2657-2007 : Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
ASTM D2657-2007-2 : Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
ASTM D2657-2007-3 : Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
ASTM D3350-2008 : Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D3350-2008-2 : Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D3350-2008-3 : Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM F412-2009 : Standard Terminology Relating to Plastic Piping Systems
ASTM F412-2009-2 : Standard Terminology Relating to Plastic Piping Systems
ASTM F412-2009-3 : Standard Terminology Relating to Plastic Piping Systems
ASTM F477-2008- Part 1 : Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM F477-2008- Part 2 : Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM F477-2008- Part 3 : Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM F1759-2004-Part 1 : Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications1
ASTM F1759-2004-Part 2 : Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications1
ASTM F1759-2004-Part 3 : Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications1
ASTM_D_2122_(2010) : Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
ASTM_D_2466_(2013) : Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
ASTM_D1598_(2009) : Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM_D1784_(2011) : Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM_D1785_(2012) : Standard Specification for Poly Vinyl Chloride (PVC) Plastic Pipe, Schedules 40, 80, and 120
ASTM_D2241_(2009) : Standard Specification for Poly Vinyl Chloride (PVC) Pressure-Rated Pipe (SDR Series)
ASTM_D2467_(2013) : Standard Specification for Poly Vinyl Chloride (PVC) Plastic Pipe Fittings, Schedule 80
ASTM_D2564_(2012) : Standard Specification for Solvent Cements for Poly Vinyl Chloride (PVC) Plastic Piping Systems
ASTM_D2729_(2011) : Standard Specification for Poly Vinyl Chloride (PVC) Sewer Pipe and Fittings
ASTM_F_789_REV_A(1995) : Standard Specification for Type-46 and type-115 Poly(Vinyl Chloride) (PVC) Plastic Gravity flow Sewer pipe and Fittings
ASTM_F679_(2013) : Standard Specification for Poly Vinyl Chloride (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
استانداردهای AWWA
استاندارد AWWA مخفف عبارت American Water Work Association میباشد.، استاندارد انجمن امور کار و آب آمریکا یک موسسه غیر انتفایی است که در سال 1881 تاسیس گردید . این انجمن در واقع مهمترین منبع در جهان محسوب میشود ، AWWA با حدود 50 هزار عضو و با هدف بهبود بهداشت عمومی، حفاظت از محیط زیست، تقویت اقتصاد و افزایش کیفیت زندگی ما فعالیت میکند .
تعدادی از استاندارهای AWWA در خصوص لوله پلی اتیلن و لوله GRP میباشد که از جامعترین استانداردها در این زمینه میباشد ، و مباحث کاملی را در خصوص روشهای تولید، حمل ، نصب و تستهای کنترل کیفی لوله پلی اتیلن و لوله های GRP است . علاوه بر این استاندارهای در رابطه با لوله های فایبر گلاس و کاربردهای آن معرفی شده است.
این استانداردها که با صنعت پلیمر و پلی اتیلن در ارتباط است در اینجا گرداوری شده است .
AWWA ANSI C 900 (2007) : Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 4 In. Through 12 In. (100 mm Through 300 mm), for Water Transmission and Distribution
AWWA C905 (2010) : Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 14 In. Through 48 In. – 350 mm Through 1,200 mm
AWWA M23 (2002) : PVC Pipe – Design and instalation
استانداردهای BSI
استاندارد BS مخفف واژه ی British Standard بودهو زمان تاسیس آن به سال 1987 همزمان با تاسیس موسسه Commercial Computer Security Center
و بخش UK Department of Trade and Industry که با نام مخفف DIT شناخته شده است ، برمیگردد. این مرکز با هدف تعریف معیارهایی بین المللی برای ارزیابی میزان امنیت تجهیزات تولیدشده توسط سازندگان تجهیزات امنیتی و ارائه تاییدیه های مربوطه و همچنین به منظور كمك به كاربران در سال 1989 با نشر کدهایی که برای سنجش امنیت تعیین گردیده بودشروع به کار کرد ، این کدها با نام Users Code of Practice معروف هستند که در مرکز CCSC تنظیم ومنتشر گردیده اند. سایت گیگاپیپر به گرداوری استانداردهای BSI مرتبط با صنعت پلیمر و پلی اتیلن پرداخته است . همچنین استانداردهای BS مرتبط به لوله پلی اتیلن را میتوانید سفارش و دانلود کنید.
دانلود استانداردهای BSI
EN ISO 1872-1 : Plastics – polyethylene (PE) moulding and extrusion materials , Part 1 : designation system and basis for specifications
BS EN ISO 1872-2 : Plastics – polyethylene (PE) moulding and extrusion materials ,Part 1 : Preparation of test specimens and determinion of properties
BS EN ISO 9001-2000 : Quality management systems – requirements
BS EN ISO 9001-2004 : quality systems – model for quality assurance in design,development, production,instalation and servicing
BS EN ISO 11542-1 : Plastics-Ultra high molecular weight polyethylene (PE-UHMW) moulding and extrusion materials , Part 1: Designation system and basis for specifications
BS EN ISO 11542-2 : Plastics-Ultra high molecular weight polyethylene (PE-UHMW) moulding and extrusion materials , Part 1: Preparation of test specimens and determination of properties
BS EN ISO 14632 : Extrudede sheets of polyethylene (PE-HD) – requirements and test Methods
BS EN ISO 15494 : Plastics piping systems for industrial applications – polybutene (PB), Polyethylene (PE) and polypropylene (PP) – Specifications for components and the system – Metric Series
BS ISO 5834-1 : Implants for surgery ultra high molecular weight polyethylene
Part 1 : Powder form
BS ISO 5834-2 : Implants for surgery ultra high molecular weight polyethylene
Part 1 : Moulded forms
BS ISO 8085-2 : Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels – Metrics Series – Specifications, Part 2 : Spigot fittings for butt fusion,for sochet fusion using heated tools and for use with electrofusion fittings
BS ISO 10838-1 : Mechanical Fittings for polyethylene piping systems for the supply of gaseous fuels, Part 1 : Metal fittings for pipes of nominal outside diameter less than or equal to 63mm
BS ISO 10838-2 : Mechanical Fittings for polyethylene piping systems for the supply of gaseous fuels, Part 2 : Metal Fittings for pipes of nominal outside diameter greater than 63mm
BS ISO 10838-3 : Mechanical Fittings for polyethylene piping systems for the supply of gaseous fuels
Part 3 :Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63mm
BS ISO 13953 : Polyethylene (PE) pipes and fittings – Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
BS ISO 14531-1 : Plastics pipes and fittings – Crossllinked polyethylene (PE-X) Pipe systems for the conveyance of gaseous fuels – Metric series – Specifications, Part 1 : Pipes
BS ISO 14616 : Plastics – Heatshrinkable films of polethylene, ethylene copolymers and their ,mixtures – Determination of the shrinkage stress and contraction stress
BS 2494 (1990) : Specification for Elastometric seals for joints in pipework and pipelines
BS 3505 (1986) : Unplasticized polyvinyl chloride (PVC-U) – Pressure pipes for cold potable water
BS 3506 (1969) : Specification for unplasticized PVC (PVC-U) Pipe for Industrial uses
BS 3867 (1987) : Outside diameters snd pressure ratings for pipe of thermoplastics materials – inch series
BS 5481 (1977) : Unplasticized PVC pipe and fittings for gravity sewers
BS EN 1555-1 (2010) : Plastics piping systems for the supply of gaseous fuels — Polyethylene – PE, Part 1 : General
BS EN 1555-2 (2010) : Plastics piping systems for the supply of gaseous fuels — Polyethylene – PE , Part 2 : Pipes
BS EN 1555-3 (2008) : Plastics piping systems for the supply of gaseous fuels – Polyethylene – PE , Part 3 : Fittings
BS EN 1555-4 (2011) : Plastics piping systems for the supply of gaseous fuels — Polyethylene – PE ,Part 4 : Valves
BS EN 1555-5 (2008) : Plastics piping systems for the supply of gaseous fuels – Polyethylene – PE, Part 5 : Fitness for purpose of the system
BS EN 3506 (2001) : Hot rolled sheets and plates in heat resisting alloys — Thickness 2,0 mm a 100mm — Dimensions
BS EN 3867 (2004) : Pipe couplings, loose flanges and seals — Flanges in titanium alloy TI-P64001
BS EN 4346 (2007) : Aerospace series — Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) — Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D u 300 mm
BS EN ISO 3506-1 (2009) : Mechanical properties of corrosion-resistant stainless steel fasteners , Part 1 : Bolts, screws and studs
BS EN ISO 3506-2 (2009) : Mechanical pro erties of corrosion-restistant stainless steel fasteners ,Part 2 : Nuts
BS EN ISO 3506-3 (2009) : Mechanical properties of corrosion-resistant stainless steel fasteners ,Part 3 : screws and similar fasteners not under tensile stress
BS EN ISO 3506-4 (2008) : Mechanical properties of corrosion-resistant stainless steel fasteners – , Part 4 : Tapping screws – ISO/DIS 3506-4:2008
BS EN ISO 9080 (2012) : Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
BS ISO 727-1 (2002) : Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/ styrene (ABS) with plain sockets for pipes under pressure, part 1 : Metric series
BS ISO 727-2 (2005) : Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/ styrene (ABS) with plain sockets for pipes under pressure , Part 2 : Inch-based series
BS ISO 3867 (2001) : Composition cork expansion joint fillers test methods
BS ISO 4427-1 (2007) : Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply , Part 1 : General
BS ISO 4427-2 (2007) : Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply , Part 2 : Pipes
BS ISO 4427-3 (2007) : Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply , Part 2: Fittings
BS ISO 4437 (2007) : Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series —Specifications
BS ISO 4660 (2011) : Rubber, raw natural — Colour index test
BS PREN ISO 3506-3 (2008) : Mechanical properties of corrosion-resistant stainless steel fasteners – Part 3: screws and similar fasteners not under tensile stress – ISO/DIS 3506-3:2008
استانداردهای DIN
استانداردDIN مخفف عبارت Deutsches Institut für Normung بوده که در محاوره فارسی به آن ” دی اِن ” است که نام یکی سازمان ملی آلمان است . این موسسه استاندارد که از قدیمی ترین سازمانها میباشد در سال 1917 کار خود را آغاز کرده و در حال حاضر بیش از 30 هزار عنوان استاندارد در زمینه های مختلف تکنولوژی را شامل میشود. همانگونه که گفتیم DIN از جمله استانداردهای بینالمللی مربوط به کشور آلمان میباشد که مجموعهای از قوانین و مقررات ساخت, تولید, اندازهگیری و تست محصولات تولیدی صنعتی را شامل میشود. استانداردهای DIN آلمان با توجه به قوانین سخت گیرانه که در زمینه تولید لوله و اتصالات دارد مورد توجه اکثر تولیدکنندگان دنیا قرار گرفته است .
در اینجا به گرداوری استاندارهای لوله پلی اتیلن و دیگر صنایع پلیمر این موسسه, مرتبط با صنعت پلیمر و پلی اتیلن پرداخته ایم .
DIN 1187 : Unplasticized Polyvinyl chloride (U-PVC) drainPipes , Dimensions, requirments, testing
DIN 8074 : Polyethylene (PE) Pipe , Dimensions
DIN 8075 : Polyethylene (PE) pipes , General Quality requirments and testing
DIN 8076 : Thermoplastics pressure pipelines , metal compression fittins for polyethylene pipes, General quality requirements ,testing
DIN 16961 – 1 : Thermoplastics pipes and fittings with profiled outer and smooth inner surfaces Part 1 : Dimensions
DIN 16961 – 2 : Thermoplastics pipes and fittings with profiled outer and smooth inner surfaces Part 2 : Technical Delivery conditions
DIN 16963 -1 : Pipe Joints and Elements for HDPE Pressure Pipelines , Types 1 and 2 Pipe Bends of Segmental Construction for Butt-Welding Dimensions
DIN 16963 – 2 : Pipe Joints assemblies and fittingd for types 1 and 2 HDPE pressure pipes , Tees and Branches produced by segment inserts and necking for butt welding Dimensions
DIN 16963 – 3: Pipe Joints and elemnts for HDPE Pressure pipelines , Type 1 and 2 Pipe Bends for Butt Welding Dimensions
DIN 16963 – 4 : Pipe joints assemblies and fittings for HDPE Pressure pipes , Adaptors for fusion jointing, flanges and sealing elemnts Dimensions
DIN 16963 – 5 : Pipe Fittings and Joints assemblies for PE80 and PE100 Polyethylene pressure pipes , general quality requirments and testing
DIN 16963 – 6 : Pipe Fittings and Joints assemblies for HDPE Pressure pipes , Injection moulded fittings for butt welding Dimensions
DIN 16963 – 7 : Pipe joints assemblies and fittings for HDPE pressure pipes , Fittings for resistance welding Dimensions
DIN 16963 – 9 : Pipe joints and Elemnts for HDPE pressure pipelines , Type 1 and 2 Injection Moulded Tee pieces for Socket-Welding Dimensions
DIN 16963 – 10 : Pipe joints and Elemnts for HDPE pressure pipelines , Type 1 and 2 Injection Moulded Tee pieces for Socket-Welding Dimensions
DIN 16963 – 11 : Pipe fittings and joints assemblies for pressure pipes made from type PE 80 and PE 100 Polyethylene , Dimensions of Bushings, flanges and sealing elements, for socket welding
DIN 16963 – 14 : Pipe Joints assemblies and fittings for types 1 and 2 HDPE pressure pipes , Injection moulded reducers and nipples for socket welding Dimensions
DIN 16963 – 15 : Pipe Joints assemblies and fittings for HDPE Pressure pipes, pipe couplings , Dimensions
DIN 19535 – 1 : HDPE Pipes and Fittings for hot water resistant drains and sewers inside buildings, Dimensions
DIN 19537 – 1 : HDPE Pipes and fittings for drains and sewers , Dimensions
DIN 19537 – 2 : HDPE Pipes and fittings for drains and sewers , Technical delivery conditions
DIN 19537 – 3 : Prefabricated HDPE manholes for use in sewerage systems , Dimensions and technical delivery conditions
DIN 19560 – 10 : Polypropylene (PP) pipes and fittings for hot water resistant wate and soil discharge systems inside buldings , part 10 : fire behavior, quality control and installation
DIN EN 1329 -1 : Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Unplasticized poly (vinyl chloride) (PVC-U) Part 1: Specifications for pipes, fittings and the system
DIN EN ISO 1167 – 4 : Thermoplastics pipes, fittings and assemblies for the conveyance of fluids – Determination of the resistance to internal pressure –Part 4: Preparation of assemblies – ISO 1167-4:2007
DIN 4279 – 7 : Testing of pressure pipelines for water by internal pressure , Pressure pipes made of rigid PVC
DIN 8061 : Unplasticized polyvinyl chloride (PVC-U) pipes – General quality requirements and testing
DIN 8062 : Unplasticized polyvinyl chloride (PVC-U) pipes – Dimensions
DIN 8063 -1 : Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (U-PVC) Pressure pipelines , Dimensions of socket bends
DIN 8063 – 2 : Pipe joints and pipe Fittings for pipes under pressure made of unplasticized polyvinyl chloride , Bends Made by Injection Moulding for Bonding Dimensions
DIN 8063 – 4 :Pipe Joint assemblies and fittings for unplasticized polyvinyl chloride (U-PVC) Pressure pipes , Bushings , Flanges , seals , Dimensions
DIN 8063 – 5 :Pipe fittings and joint assemblies for unplasticized polyvinyl choride (U-PVC) pressure pipes , part 5 : General quality requirements and testing
DIN 8063 – 11 :Pipe Joints and pipe fittings for pipes under pressure made of Unplasticized Polyvinyl Chloride (Rigid PVC) , Sockets Wiyh Primary Element of Copper-Zink Alloy (Brass) for Bonding,Dimensions
DIN 8063- 12 :Pipe Joint assemblies and fittings for unplasticized polyvinyl chloride (U-PVC) pressure pipelines , Dimensions of Flanged and socket Fittings
DIN 16874 : High density polyethylene (HDPE) Pipes and Fittings for Cable ducting , Dimensions and technical delivery conditions
DIN 16970 : Adhesives for Bonding pipes and pipe system elemnts of PVC General quality requirements and testings
DIN 19531-10 : U-PVC Pipes and Fittings for drainage systems inside buildings , Part 10 : Fire behaviour, quality control and installation
DIN EN 921 : Thermoplastics pipes , determination of resistance to internal pressure at constant temperature
DIN EN 1555 – 5 : Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Part 5: Fitness for purpose of the system
DIN EN ISO 8062 – 3 : Geometrical Product Specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings – ISO 8062-3:2007
ارسال بفرمایید و یا فرم درخواست استاندارد B11 را در انتهای صفحه پر کنید.
